Xyloketal G,a Novel Metabolite from the Mangrove Fungus <Emphasis Type="Italic">Xylaria sp.</Emphasis> 2508

A novel metabolite 1, named xyloketal G, was isolated from cultures of marine derived mangrove fungus Xylaria sp. 2508. Its structure was elucidated by analysis of spectroscopic data.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 22–23, January–February, 2005.     

Assessment of the Fe-Sn-Zn phase diagram at 450°C

The Fe-Sn-Zn system is of interest because Sn is one element added to the Zn galvanizing bath to overcome the drawbacks due to the presence of Si in semi-killed steels. This work has been undertaken with the aim to understand the tin effect on the microstructure and the layers growth in batch galvanized coatings on low alloyed steels. Various experimental techniques such as metallography, scanning electron microscopy (SEM) coupled with X-ray energy dispersive spectroscopy (EDX) are used in order to characterize the microstructure and the properties of such coatings elaborated in a zinc bath enriched with tin. Solidification phenomena and layers growth mechanisms during galvanization are explained by means of the ternary phase diagram Fe-Sn-Zn at 450°C. The Calphad method allows to obtain this phase diagram from the three optimized binary phase diagrams Fe-Sn, Fe-Zn and Sn-Zn and some experimental data inside the ternary Fe-Sn-Zn system.     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.     

Ferromagnetic resonance investigation of dispersed Ni catalysts: epitaxial and textural effects from the support

Catalysts consisting of dispersed Ni particles supported on silica and alumina, with sizes ranging from 6 to 20 nm, have been studied by ferromagnetic resonance. For the Ni on Al₂O₃ catalyst, a textural promotion effect is shown to be present and it is attributed to the possible presence of NiAl₂O₄. The FMR data confirm the epitaxial growth of Ni on SiO₂ when Ni antigorite is reduced and show that some anisotropy is still present after sintering of the catalyst at about 1200K.     

Pozzolanic properties of a residual FCC catalyst during the early stages of cement hydration

The catalyst used in fluidized catalytic cracking (FCC) units of refineries after several recovery cycles in regeneration units, reduces its activity and it is partially substituted by new catalyst in the process. As it has a high silicon and aluminum oxides content, the pozzolanic properties of a Brazilian FCC spent residual catalyst, used in different substitution degrees to cement, were evaluated by three thermal analysis techniques during the early stages of hydration of a type II Portland cement. NCDTA curves show in real time that the residual catalyst, accelerates the stages of cement hydration. TG and DSC curves of respective pastes after 24 h of hydration evidence the pozzolanic activity of the waste, respectively, by the lower water mass loss during the dehydroxylation of the residual calcium hydroxide and by the lower dehydroxylation endothermal effect. Within the analyzed period, the higher is the cement substitution degree, the higher is the pozzolanic activity of the residual catalyst.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.     

Sorption behavior of Co(II) on γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> in the presence of humic acid

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The extent of sorption of divalent metal cations is controlled by a number of factors including cosorbing or complexing. In this work, the effects of pH, humic acid HA/Co(II) addition orders, ionic strength, concentration of HA, and foreign cations on the Co(II) sorption on γ-Al₂O₃ in the presence of HA were investigated. The sorption isotherms of Co(II) on γ-Al₂O₃ in the absence and presence HA were also studied and described by using S-type sorption model. The experimental results showed that the Co(II) sorption is strongly dependent on the pH values, concentration of HA, but independent of HA/Co(II) addition orders, ionic strength, and foreign cations in the presence of HA under our experimental conditions. The results also indicated that HA enhanced the Co(II) sorption at low pH, but reduced the Co(II) sorption at high pH. It was hypothesized that the significantly positive influence of HA at low pH on the Co(II) sorption on γ-Al₂O₃ was attributed to strong surface binding of HA on γ-Al₂O₃ and subsequently the formation of ternary surface complexes such as ≡S-OOC-R-(COO⁻) _x Co^2−x . Chemi-complexation may be the main mechanism of the Co(II) sorption on γ-Al₂O₃ in the presence of HA.     

Solution conformation by NMR and molecular modeling of three sulfide-free somatostatin octapeptide analogs compared to angiopeptin

Summary The conformation in dimethylsulfoxide of the somatostatin derivative angiopeptin and of three disulfide-free analogs was estimated by two-dimensional nuclear magnetic resonance spectroscopy at room temperature. The resulting 3D molecular graphics were compared and shown to reflect the observed differences in the inhibition of restenosis after rat aorta balloon injury by these octapeptide inhibitors. Angiopeptin and its active analog 2 displayed a relatively rigid conformation of the cyclic hexapeptide backbone due to the presence of two well-defined hydrogen bonds, further stabilized by a third hydrogen bond outside the ring. No such constraints were detected for the two biologically inactive analogs, which, compared to 2, had a two-atom longer or shorter hexapeptide ring. The well-defined structure of compound 2 may serve as an improved pharmacophore for this new class of drugs.     

Preconcentration and separation of copper(II), cadmium(II) and chromium(III) in a syringe filled with 3-aminopropyltriethoxysilane supported on silica gel

In this study, a syringe was filled with silica gel loaded with 3-aminopropyltriethoxysilane, for the separation and preconcentration of copper, cadmium and chromium prior to their determination by graphite furnace atomic absorption spectrometry (GFAAS) in seawater. For this purpose, a syringe was filled with 0.5 g of modified silica gel and the sample solution was drawn into the syringe and ejected back again. The analyte elements were quantitatively retained at pH 5. Then, the elements sorbed by the silica gel were eluted with 2.0 M of HCl and determined by GFAAS. At optimum conditions, the recovery of Cu, Cd and Cr were 96-98%. Detection limits (3delta) were 6.6, 7.5 and 6.0 micro g L(-1) for Cu, Cd and Cr, respectively. The elements could be concentrated by drawing and discharging several portions of sample successively but eluting only once. Cu, Cd and Cr added to a seawater sample were quantitatively recovered (>95%) in the range of the 95% confidence level. The method proposed in this paper was compared with a column technique. Optimum experimental conditions, reproducibility, precision and recoveries of both techniques are the same, but the syringe technique is much faster, easier and more practical than the column technique. It is a portable system and allows one to make the sorption process in the source of sample. In addition, the risk of contamination is less than in the column technique.