Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.     

Energy transfer rates and impact sensitivities of two classes nitramine explosives molecules

Some explosives are stable molecules with large energy barriers to chemical reaction, and in shock or impact initiation, a sizable amount of phonon energy must be converted to the molecular internal higher vibrations by multiphonon up pumping. To investigate the relationship between impact sensitivities and energy transfer rates, the number of doorway modes of explosive molecules is estimated by a simple theory in which the rate is proportional to the number of normal mode vibrations. We evaluated frequencies of normal mode vibrations of 13 explosive molecules which are CHNO nitramine-contained and have not been analyzed previously. The number of doorway modes in the regions of 200–700 cm⁻¹ was evaluated by the direct counting method. For more clear investigation of the relationship we have classified these 13 nitramine explosive molecules, by the number of nitramine group they contained, into two groups. There are eight molecules that contained one nitramine group and five molecules that contained poly-nitramine groups. It is found that the number of doorway modes shows a linearly correlation to the impact sensitivities derived from drop hammer tests. This result is in agreement with that of several previous works. Besides, it is also noted in our study that in those nitramine explosives molecules with similar molecular structure (similar number nitramine group they contained) and similar molecular weight, the correlation between the sensitivity and the number of doorway modes is higher. We found that the vibrational frequency of ω corresponds to nitro group motions of every molecule is contributed to the number of doorway modes in the regions of 200–700 cm⁻¹.     

Efficient alkene hydrosilation with bis(8-quinolyl)phosphine (NPN) nickel catalysts. The dominant role of silyl-over hydrido-nickel catalytic intermediates

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with a variety of hydrosilanes under mild conditions and low catalyst loadings. DFT studies reveal the presence of two coupled catalytic cycles based on [(NPN)NiH]⁺ and [(NPN)NiSiR₃]⁺ active species, with the latter being more efficient for producing the product. The preferred silyl-based catalysis is not due to a more facile insertion of alkene into the Ni–Si (vs. Ni–H) bond, but by consistent and efficient conversions of the hydride to the silyl complex.

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with hydrosilanes under mild conditions and low catalyst loadings.     

Cucurbit[6]uril pseudorotaxanes: distinctive gas-phase dissociation and reactivity

Cucurbit[6]uril forms a doubly charged complex with 1,4-butanediammonium cation that is observed using electrospray ionization Fourier transform mass spectrometry. Such 1:1 complexes are not observed for the smaller cucurbit[5]uril, which forms a 2:1 ammonium:cucurbituril complex instead. The 1:1 complex with cucurbit[6]uril is difficult to fragment via collisional activation; when it does fragment, both breakup of the cucurbituril cage and loss of the amine are observed. Further, the complex reacts with tert-butylamine via slow adduction. In contrast, nonrotaxane analogues (such as doubly charged 2:1 complexes of either protonated 1,4-butanediamine or protonated ethylenediamine with cucurbit[6]uril) fragment via easy loss of the intact amine upon collisional activation and react with tert-butylamine via rapid displacement of the original amine. On the basis of stoichiometry, fragmentation behavior, and reactivity, we conclude that the doubly charged complex of cucurbit[6]uril with 1,4-butanediammonium is a gas-phase pseudorotaxane.     

Optically activated functionalization reactions in Si quantum dots

Using ab initio calculations, we have studied the influence of optical activation on functionalization reactions of silicon quantum dots with unsaturated hydrocarbons. We find that the energy barrier for the replacement of silicon-hydrogen with silicon-carbon bonds is dramatically reduced if the silicon dot is optically excited. These results provide an explanation for recent experiments on optically excited porous silicon. In addition, our calculations point at the existence of an intermediate spin-polarized state formed by the dot and an alkene or alkyne, upon relaxation after absorbing a photon. This state could be detected experimentally, by, for example, electron spin resonance measurements. Based on the results of our calculations as a function of the dot size, varied from 0.8 to 1.5 nm, we propose that light activated reactions could be used to functionalize and size select silicon quantum dots at the same time.     

Studies on intramolecular nh-bridging in aromatic compounds. Part 3 [1–3]

A study was made of the use of calcium oxide as a catalyst at a temperature of 400–700° for the dehy-drocyclization of four primary arylamines: 2-aminobiphenyl, 1-aminotriphenylene (5c) , 2-phenoxyaniline, and N-(2-aminophenyl)pyrrole. Maximal yields of cyclized products isolated were 53% (carbazole), 52% (4H-naphtho[1,4-def]carbazole), 18% (phenoxazine), and 0%, respectively. Comparison is made with reported cyclizations of the corresponding nitro and azido starting materials. In one case, treatment of I-nitrotriphenylene with triethyl phosphite produced mainly diethyl N-(1-triphenylenyl)phosphoramidate (51%). Mono- and hemihydrochlorides of 5c are described. A mechanism for the catalyzed dehydrocy-clization is proposed.     

Micellization and morphological characterization of Ag-micelles prepared by poly(vinyl acetate)–silver nitrate in solvent/nonsolvent system

The inducing method for preparing Ag-micelle solution with the use of mixed solvent/nonsolvent, and the morphological characterization of the generated metal–micelles were investigated and reported in this paper. In this method, an Ag containing metal chelate polymer (MCP) raw solution was preprepared by dissolving poly(vinyl acetate) (PVAc)–silver nitrate (AgNO₃) MCP in conc. formic acid, and a mixed solvent of HCOOH/H₂O with specific water composition was then added to induce the micellization of the MCP chain. The critical water concentration (CWC) that was needed for inducing the formation of the Ag-micelles, and the water concentration at which the flocculation of the Ag-micelles occurred in micellar solution, were studied by measuring the transmittance of the dilute MCP solution; the results showed that a long-lasting MCP solution with stable micelles might be prepared by using a H₂O/HCOOH solvent of specific weight ratio 1:1.2. The effect of the AgNO₃ concentration on the morphology of the Ag-micelles was also investigated by transmission electron microscopy (TEM). At AgNO₃ concentration below 0.5 wt%, the Ag-micelles displayed a variety of core-shell structure; but as the AgNO₃ concentration was increased to 1.0–2.0 wt%, micelles that had Ag-solid embedded in the micellar core were observed.     

Highly enantioselective catalytic acyl-pictet-spengler reactions

The enantioselective cyclization of N-acyliminium ions generated in situ from tryptamine is promoted with high enantioselectivity by a new chiral thiourea catalyst. This represents the first successful system for asymmetric catalysis of the Pictet-Spengler reaction.     

Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Interference of Copper(II) ions with Non-covalent Interactions in Uridine or Uridine 5′-Monophosphate Systems with Adenosine,Cytidine, Thymidine and their Monophosphates in Aqueous Solution

Coordination reactions of copper(II) ions and their effect on non-covalent interactions in uridine (Urd) or uridine 5′-monophosphate (UMP) systems with nucleosides (Ado, Cyd, Thd) and nucleotides (AMP and CMP) in aqueous solutions have been studied. At high pH the effective coordination centers are deprotonated N(3) atoms from Urd and Thd, whereas at low pH, the N(3) atoms of pyrimidine nucleosides are blocked for coordination and the metallation sites are endocyclic nitrogen atoms from Ado, Cyd, AMP and CMP. Moreover, at low pH, the main reaction center in nucleotide solutions is the phosphate group. The NMR study has proven the occurrence of non-covalent ion-dipole interactions and stacking interactions in the systems considered. Introduction of a copper ion in the majority of systems causes the disappearance of weak interactions between ligands. The structures of the complexes in solution have been inferred from the equilibrium study: an analysis of the pH range of their occurrence with respect to the pH range of deprotonation of particular groups in the compounds studied, using Vis, EPR and ¹³C as well as ³¹P NMR spectral analysis.