Preconcentration of cadmium and nickel using the bioadsorbent Geobacillus thermoleovorans subsp. stromboliensis immobilized on Amberlite XAD-4

Cadmium and nickel ions have been preconcentrated on Geobacillus thermoleovorans subsp. stromboliensis, immobilized on Amberlite XAD-4, and were determined by flame atomic absorption spectrometry (FAAS). Parameters such as pH, amount of adsorbent, eluent type and volume, flow rate of solution and the matrix interference effect on retention have been studied, and extraction conditions were optimized. Elution of Cd(II) and Ni(II) from minicolumns was carried out with 1.0 M hydrochloric acid or nitric acid with recoveries from 97 to 100%. The sorption capacity is 0.0373 and 0.0557 mmol g^?1 for Cd(II) and Ni(II), respectively. The detection limits were 0.24 μg L^?1 for cadmium and 0.3 μg L^?1 for nickel. The relative standard deviations of the procedure were below 10%. The procedure was validated by analyzing certified reference materials and applied to the determination of Cd(II) and Ni(II) in natural water and food samples.     

Synthesis and characterization of well‐defined ABC‐type triblock copolymers via atom transfer radical polymerization and stable free‐radical polymerization

An asymmetric difunctional initiator 2‐phenyl‐2‐[(2,2,6,6 tetramethylpiperidino)oxy] ethyl 2‐bromo propanoate ( 1 ) was used for the synthesis of ABC‐type methyl methacrylate (MMA)‐tert‐butylacrylate (tBA)‐styrene (St) triblock copolymers via a combination of atom transfer radical polymerization (ATRP) and stable free‐radical polymerization (SFRP). The ATRP‐ATRP‐SFRP or SFRP‐ATRP‐ATRP route led to ABC‐type triblock copolymers with controlled molecular weight and moderate polydispersity (M_w/M_n < 1.35). The block copolymers were characterized by gel permeation chromatography and ¹H NMR. The retaining chain‐end functionality and the applying halide exchange afforded high blocking efficiency as well as maintained control over entire routes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2025–2032, 2002     

Electrochemically induced atom-by-atom growth of ZnS thin films: a new approach for ZnS co-deposition

Ultrathin films of ZnS were grown on Au (111) substrates using a novel, simple co-deposition method and characterized using X-ray diffraction (XRD), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and UV-visible spectroscopy. Cyclic voltammograms were used to determine approximate deposition potentials for co-deposition. XRD shows that the material growth is highly preferential with (111) orientation. Both AFM and XRD data indicate that the ZnS growth mechanism starts by the formation of rounded nanoparticles at the surface and then continues by lateral and vertical growth to form flat square crystallites of ZnS. UV-vis spectra taken for the ZnS thin films with various thicknesses, which is related to deposition time, shows that the band gap of the ZnS decreases as the film thickness increases.     

The determination of β-agonist residues in bovine tissues using liquid chromatography–tandem mass spectrometry

We aimed to develop a rapid, simple and reproducible method based on LC–tandem mass spectrometry (LC–MS/MS) to analyze β-agonist residues (clenbuterol, zilpaterol, ractopamine and isoxsuprine) in bovine tissues. The method was validated in accordance with the European Council Decision 2002/657/EC. The samples were homogenized, and then 10 mL of an acetate buffer was added to a 5-g sample. The sample was then centrifuged at 12,000 rpm and filtered. Sodium hydroxide (2 m ) was added to adjust pH of the sample that was centrifuged again. The extract was filtered through a solid-phase extraction column. The residue was re-dissolved in 250 μL acetonitrile and then subjected to LC–MS/MS. The separation was done on a C₁₈ column. The mobile phase consisted of 0.1% formic acid in deionized water and 0.1% formic acid in methanol. The mean recoveries of β-agonists were in the range of 84.3%–119.1% with relative standard deviations (%RSDs) of 0.683%–4.05%. Decision limits and detection capabilities of the analytes ranged from 0.0960 to 4.9349 μg/kg and from 0.0983 to 5.0715, respectively. This method was used to detect four β-agonists in 100 bovine muscle, 100 liver and 100 kidney tissues from a slaughterhouse. No residue was found above the maximum residue limit level.     

Photoresponsive poly(methyl methacrylate)2–(polystyrene)2 miktoarm star copolymer containing an azobenzene moiety at the core

We prepared a novel miktoarm star copolymer with an azobenzene unit at the core via combination of atom transfer radical polymerization (ATRP) and nitroxide‐mediated free radical polymerization (NMP) routes. For this purpose, first, mikto‐functional initiator, 3 , with tertiary bromide (for ATRP) and 2,2,6,6‐tetramethylpiperidin‐1‐yloxy (TEMPO) (for NMP) functionalities and an azobenzene moiety at the core was synthesized. The initiator 3 thus obtained was used in the subsequent living radical polymerization routes such as ATRP of MMA and NMP of St, respectively, to give A₂B₂ type miktoarm star copolymer, (PMMA)₂‐(PSt)₂ with an azobenzene unit at the core with controlled molecular weight and low polydispersity (M_w/M_n < 1.15). The photoresponsive properties of 3 and (PMMA)₂‐(PSt)₂ miktoarm star copolymer were investigated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1396–1403, 2006     

All-fiber wavemeter and Fourier-transform spectrometer

An all-fiber Fourier-transform spectrometer is proposed and demonstrated, based on the diffraction of light through the side of a standard optical fiber by a UV-induced fiber grating. The interference pattern, whose Fourier transform yields the optical spectrum, is formed by light diffracted from counterpropagating modes in the fiber. The device is simple and compact and functions as a wavemeter, a fiber-optic network monitor, or a tool for fabrication and testing of long fiber Bragg gratings.     

A penny-shaped crack in a filament-reinforced matrix—II. The crack problem

Using the filament model developed in the previous paper, the elastostatic interaction problem between a penny-shaped crack and a slender inclusion or filament in an elastic matrix is formulated. For a single filament as well as multiple identical filaments located symmetrically around the crack the problem is shown to reduce to a singular integral equation. The solution of the problem is obtained for various geometries and filament to-matrix stiffness ratios, and the results relating to the angular variation of the stress intensity factor and the maximum filament stress are presented.