Evidence for viscoelastic effects in surface capillary waves of molten polymer films

The surface dynamics of supported ultrathin polystyrene films with thickness comparable to the radius of gyration were investigated by surface sensitive x-ray photon correlation spectroscopy. We show for the first time that the conventional model of capillary waves on a viscous liquid has to be modified to include the effects of a shear modulus in order to explain both static and dynamic scattering data from ultrathin molten polymer films.     

Fabrication of Sn–C composite electrodes by electrodeposition and their cycle performance for Li-ion batteries

To improve the cycle performance of the thick Sn electrode of 10 μm thickness, the Sn–C composite electrodes were fabricated by co-electrodeposition with two kinds of carbon particles which were the graphite and the acetylene black. The acetylene black particles were well dispersed in the Sn matrix more than the graphite particles. The carbon content in the Sn–C composite electrodes was measured about 12% of the graphite and 16% of the acetylene black particles. Even though carbon content of the Sn–acetylene black electrode was not significantly higher than that of the Sn–graphite electrode, the cycle performance of the Sn–acetylene black electrode was much higher than that of the Sn–graphite electrode. This demonstrates that the ‘buffering effects’ of well dispersed acetylene black particles was larger than that of the graphite particles. The cycle performance of the Sn–acetylene black electrode was significantly improved by the aging treatment.     

Über einen zusammenhang zwischen gewissen linearen differential- und differenzengleichungen

Ohne Zusammenfassung     

Coherent Brillouin spectroscopy in a strongly scattering liquid by picosecond ultrasonics

In a modification of a picosecond ultrasonic technique, a short acoustic pulse is launched into a liquid sample by a laser pulse absorbed in a semitransparent transducer film and is detected via coherent Brillouin scattering of a time-delayed probe pulse. With both excitation and probing performed from the transducer side, the arrangement is suitable for in vivo study of biological tissues. The signal is collected from a micrometer-thick layer next to the transducer and is not affected by the diffuse scattering of probe light deeper in the sample. The setup, utilizing a 33 nm thick single crystal SrRuO(3) transducer film, is tested on a full fat milk sample, with 11 GHz acoustic frequency recorded.     

Removal and recovery of mercury from aqueous solution using magnetic silica nanocomposites

Thiol-functionalized magnetic silica nanocomposite was synthesized and tested for its mercury pick-up capability in aqueous solution. Magnetic property was to be utilized upon the collection of the adsorbents and the recovery adsorbed Hg by subsequent separation process. Cobalt ferrite nanoparticle, the core of magnetic silica nanocomposite, was synthesized using a thermal decomposition method and grown to a particle having an average size of 13 nm. The dispersed nanoparticles were then further arranged into spherical groups using a nanoemulsion method to enhance the reactivity toward magnets followed by tetraethyl orthosilicate coating using a modified Stöber method. The pore structure was modified by an additional coating of cetyltrimethylammonium bromide and tetraethyl orthosilicate. Finally, the surface of the magnetic silica nanocomposite was functionalized with thiol group. When tested for mercury adsorption capacity, a sufficiently high Hg adsorption capacity of 19.79 mg per g of adsorbent was obtained at room temperature and a pH of 5.5.     

Simultaneous determination of chromones and coumarins in Radix Saposhnikoviae by high performance liquid chromatography with diode array and tandem mass detectors

Methods using high performance liquid chromatography with diode array detection (HPLC-DAD) and tandem mass spectrometry (HPLC-MS/MS) were developed and validated for the simultaneous determination of 5 chromones and 6 coumarins: prim-O-glucosylcimifugin (1), cimifugin (2), nodakenin (3), 4'-O-β-d-glucosyl-5-O-methylvisamminol (4), sec-O-glucosylhamaudol (5), psoralen (6), bergapten (7), imperatorin (8), phellopterin (9), 3'-O-angeloylhamaudol (10) and anomalin (11), in Radix Saposhnikoviae. The separation conditions for HPLC-DAD were optimized using an Ascentis Express C18 (4.6 mm×100 mm, 2.7 μm particle size) fused-core column. The mobile phase was composed of 10% aqueous acetonitrile (A) and 90% acetonitrile (B) and the elution was performed under a gradient mode at a flow rate of 1.0 mL/min. The detection wavelength was set at 300 nm. The HPLC-DAD method yielded a base line separation of the 11 components in 50% methanol extract of Radix Saposhnikoviae with no interfering peaks detected. The HPLC-DAD method was validated in terms of linearity, accuracy and precision (intra- and inter-day), limit of quantification (LOQ), recovery, and robustness. Specific determination of the 11 components was also accomplished by a triple quadrupole tandem mass spectrometer equipped with an electrospray ionization (ESI) source. This HPLC-MS/MS method was also validated by determining the linearity, limit of quantification, accuracy, and precision. Quantification of the 11 components in 51 commercial Radix Saposhnikoviae samples was successfully performed using the developed HPLC-DAD method. The identity, batch-to-batch consistency, and authenticity of Radix Saposhnikoviae were successfully monitored by the proposed HPLC-DAD and HPLC-MS/MS methods.     

Loading device effect on protein unfolding mechanics

Single-molecule mechanical manipulation has enabled quantitative understanding of not only the kinetics of both bond rupture and protein unfolding, but also the free energy landscape of chemical bond and/or protein folding. Despite recent studies reporting the role of loading device in bond rupture, a loading device effect on protein unfolding mechanics has not been well studied. In this work, we have studied the effect of loading-device stiffness on the kinetics of both bond rupture and protein unfolding mechanics using Brownian dynamics simulations. It is shown that bond rupture forces are dependent on not only loading rate but also the stiffness of loading device, and that protein unfolding mechanics is highly correlated with the stiffness of loading device. Our study sheds light on the importance of loading device effect on the mechanically induced bond ruptures and protein unfolding.