Naturally Derived Melanin Nanoparticle Composites with High Electrical Conductivity and Biodegradability

The development of electronic devices from naturally derived materials is of enormous scientific interest. Melanin, a dark protective pigment ubiquitous in living creatures, may be particularly valuable because of its ability to conduct charges both electronically and ionically. However, device applications are severely hindered by its relatively poor electrical properties. Here, the facile preparation of conductive melanin composites is reported in which melanin nanoparticles (MNPs), directly extracted from squid inks, form electrically continuous junctions by tight clustering in a poly(vinyl alcohol) (PVA) matrix. Prepared as freestanding films and patterned microstructures by a series of precipitation, dry casting, and post‐thermal annealing steps, the percolated composites show electrical conductivities as high as 1.17 ± 0.13 S cm^?1 at room temperature, which is the best performance yet obtained with biologically‐derived nanoparticles. Furthermore, the biodegradability of the MNP/PVA composites is confirmed through appetitive ingestion by Zophobas morios larvae (superworms). This discovery for preparing versatile biocomposites suggests new opportunities in functional material selections for the emerging applications of implantable, edible, green bioelectronics.     

Application of Yeast Candida utilis to Ferment Eisenia bicyclis for Enhanced Antibacterial Effect

In this study, fermentation broth of Eisenia bicyclis with Candia utilis YM-1 exhibited enhanced antimicrobial activity against methicillin-resistant Staphylococcus aureus (MRSA) and food-borne pathogenic bacteria. To perform a more detailed investigation on the antibacterial activity, the fermented broth of E. bicyclis was extracted with methanol and further fractionated with organic solvents. After 1-day fermentation, the ethyl acetate (EtOAc)-soluble extract exhibited the highest anti-MRSA activity with minimum inhibitory concentration values ranging from 128 to 512 μg/mL, suggesting that the fermentation of E. bicyclis with C. utilis YM-1 may enhance antibacterial activity against MRSA. This effect was correlated to the result obtained by an increase in total phenolic contents in EtOAc-soluble extract. In addition, high-performance liquid chromatography analysis revealed that eckol, dieckol, dioxinodehydroeckol, and phlorofucofuroeckol-A contents in the EtOAc-soluble extract increased significantly. Thus, these results show that anti-MRSA activity of E. bicyclis fermented with C. utilis most likely originated from phlorotannins and allow the possible application of a variety of seaweed functional foods.     

Coherent Brillouin spectroscopy in a strongly scattering liquid by picosecond ultrasonics

In a modification of a picosecond ultrasonic technique, a short acoustic pulse is launched into a liquid sample by a laser pulse absorbed in a semitransparent transducer film and is detected via coherent Brillouin scattering of a time-delayed probe pulse. With both excitation and probing performed from the transducer side, the arrangement is suitable for in vivo study of biological tissues. The signal is collected from a micrometer-thick layer next to the transducer and is not affected by the diffuse scattering of probe light deeper in the sample. The setup, utilizing a 33 nm thick single crystal SrRuO(3) transducer film, is tested on a full fat milk sample, with 11 GHz acoustic frequency recorded.     

Removal and recovery of mercury from aqueous solution using magnetic silica nanocomposites

Thiol-functionalized magnetic silica nanocomposite was synthesized and tested for its mercury pick-up capability in aqueous solution. Magnetic property was to be utilized upon the collection of the adsorbents and the recovery adsorbed Hg by subsequent separation process. Cobalt ferrite nanoparticle, the core of magnetic silica nanocomposite, was synthesized using a thermal decomposition method and grown to a particle having an average size of 13 nm. The dispersed nanoparticles were then further arranged into spherical groups using a nanoemulsion method to enhance the reactivity toward magnets followed by tetraethyl orthosilicate coating using a modified Stöber method. The pore structure was modified by an additional coating of cetyltrimethylammonium bromide and tetraethyl orthosilicate. Finally, the surface of the magnetic silica nanocomposite was functionalized with thiol group. When tested for mercury adsorption capacity, a sufficiently high Hg adsorption capacity of 19.79 mg per g of adsorbent was obtained at room temperature and a pH of 5.5.     

Simultaneous determination of chromones and coumarins in Radix Saposhnikoviae by high performance liquid chromatography with diode array and tandem mass detectors

Methods using high performance liquid chromatography with diode array detection (HPLC-DAD) and tandem mass spectrometry (HPLC-MS/MS) were developed and validated for the simultaneous determination of 5 chromones and 6 coumarins: prim-O-glucosylcimifugin (1), cimifugin (2), nodakenin (3), 4'-O-β-d-glucosyl-5-O-methylvisamminol (4), sec-O-glucosylhamaudol (5), psoralen (6), bergapten (7), imperatorin (8), phellopterin (9), 3'-O-angeloylhamaudol (10) and anomalin (11), in Radix Saposhnikoviae. The separation conditions for HPLC-DAD were optimized using an Ascentis Express C18 (4.6 mm×100 mm, 2.7 μm particle size) fused-core column. The mobile phase was composed of 10% aqueous acetonitrile (A) and 90% acetonitrile (B) and the elution was performed under a gradient mode at a flow rate of 1.0 mL/min. The detection wavelength was set at 300 nm. The HPLC-DAD method yielded a base line separation of the 11 components in 50% methanol extract of Radix Saposhnikoviae with no interfering peaks detected. The HPLC-DAD method was validated in terms of linearity, accuracy and precision (intra- and inter-day), limit of quantification (LOQ), recovery, and robustness. Specific determination of the 11 components was also accomplished by a triple quadrupole tandem mass spectrometer equipped with an electrospray ionization (ESI) source. This HPLC-MS/MS method was also validated by determining the linearity, limit of quantification, accuracy, and precision. Quantification of the 11 components in 51 commercial Radix Saposhnikoviae samples was successfully performed using the developed HPLC-DAD method. The identity, batch-to-batch consistency, and authenticity of Radix Saposhnikoviae were successfully monitored by the proposed HPLC-DAD and HPLC-MS/MS methods.     

Statistical properties of cross-correlation in the Korean stock market

We investigate the statistical properties of the cross-correlation matrix between individual stocks traded in the Korean stock market using the random matrix theory (RMT) and observe how these affect the portfolio weights in the Markowitz portfolio theory. We find that the distribution of the cross-correlation matrix is positively skewed and changes over time. We find that the eigenvalue distribution of original cross-correlation matrix deviates from the eigenvalues predicted by the RMT, and the largest eigenvalue is 52 times larger than the maximum value among the eigenvalues predicted by the RMT. The b₄₇₃\beta_{473} coefficient, which reflect the largest eigenvalue property, is 0.8, while one of the eigenvalues in the RMT is approximately zero. Notably, we show that the entropy function E(s)E(\sigma) with the portfolio risk σ for the original and filtered cross-correlation matrices are consistent with a power-law function, E(σ) ~ s^-g\sigma^{-\gamma}, with the exponent γ ~ 2.92 and those for Asian currency crisis decreases significantly.     

Heat Treatment of the Photonic Crystal Fiber

We report heat treatment of the photonic crystal fiber. As the temperature was increased, the transmission of the photonic crystal fiber was increased, unlike conventional single mode fiber. The transmission increase at short wavelength region was larger than long wavelength region for the various temperatures. After crystallization of the silica glass, the spectra of the photonic crystal fiber were just decreased at all wavelength regions, but, in case of the single mode fiber, the absorption in visible region around 450 nm increased with increasing temperature.     

Superconducting proximity effect in the presence of strong spin scattering

We report measurements of the four terminal temperature dependent resistance of narrow Au wires implanted with 100 ppm Fe impurities in proximity to superconducting Al films. The wires show an initial decrease in resistance as the temperature is lowered through the superconducting transition of the Al films, but then show an increase in resistance as the temperature is lowered further. In contrast to the case of pure Au wires in contact with a superconducting film, the resistance at the lowest temperatures rises above the normal state resistance. Analysis of the data shows that, in addition to contributions from magnetic scattering and electron-electron interactions, the temperature dependent resistivity shows a substantial contribution from the superconducting proximity effect, which exists even in the presence of strong spin scattering.     

A Plane-Wave Beam-Steering Lens Design Using Microstrip Switched-Line Phase Shifters

A compact beam-steering lens design appropriate for millimeter-wave and submillimeter-wave applications is experimentally verified with an X-band test model. The lens achieves coupling to plane-wave beams through arrays of patch antennas placed on its two outer surfaces. The isolation between input and output antennas is accomplished by inserting a metal ground plane in the middle of the lens. The two closest patch antennas on the front and the backside are connected together with microstrip circuits that include switched-line phased shifters and interconnecting vias through the lens substrate. Three different X-band 100-element plane-wave microstrip lenses that use passive delay lines instead of actual phase-shifters were fabricated to successfully demonstrate the beam-steering angles of 20 and 40 degrees. From a separate waveguide measurement on the unit-cell element only, the insertion loss of the lens was estimated to be approximately 3.5 dB with bandwidth of 2% at 10 GHz.