Monitoring the traceability of the pH of a primary tetraborate buffer: comparison of results from primary and secondary apparatus

This paper reports evaluation of the behaviour of different combined glass electrodes applied to measurement of the pH of a primary, 0.01 mol kg⁻¹, tetraborate buffer. Measurements were first performed by use of a primary Harned cell (at 15, 25, and 37 °C); these results were then compared with those obtained for the same solution by use of three combined glass electrodes (25 °C) with different membranes and liquid-junction designs, calibrated by use of commercial pH-metric buffers. The pH of the same solution was also measured in terms of the molal concentration of hydrogen ions, using acid–base titration to evaluate the formal potential difference K of each cell at fixed ionic strength, I, adjusted by addition of KCl or Et₄NI (tetraethylammonium iodide). The reference value from primary measurement, paH = 9.171, was slightly closer to the mean value obtained by determination of concentration, rather than that obtained by direct measurement of activity; the differences were smaller than the extended uncertainty characteristics of the secondary measurements. The importance of evaluation of the ionic strength of the solution under study is emphasised. We verified that for tetraborate buffer slight modification of the value of I used to calculate γ _i (the activity coefficient of a single ion) in the calculation of paH from the acidity function at zero molality of chloride can significantly affect the reference value of the calibrator tool. This is true, in general, for low values of the ionic strength, such as those considered in this work; an approximate value of I can then cause distortions along the pH traceability chain. Application of the concepts of thermodynamics to this traceability chain is discussed.     

A supramolecular approach to sub-ppb aromatic VOC detection in air

Micromachining technology is coupled to a selective pre-concentration material for the development of a portable sub-ppb level monitoring system for aromatic volatile organic compounds (VOC); the high sensitivity of Metal Oxide (MOX) gas sensors is combined with a supramolecular concentration unit to increase selectivity and reduce the detection limits.     

A dizinc complex for selective fluorescence sensing of uridine and uridine-containing dinucleotides

A dizinc complex with a polyamine macrocycle is able to selectively bind and sense uridine (U) as well as the uridine-containing ribodinucleotides U(3'-5')pU and U(3'-5')pA, thanks to an exciplex emission arising from a pi-stacked complex involving the dipyridine unit and Zn(II)-bound uridine moieties.     

Zeolite inorganic supports for BSA immobilization: comparative study of several zeolite crystals and composite membranes

Zeolites due to their low toxicity and high compatibility are considered new biomaterials for medical applications. The surface adsorption behaviour of zeolite crystals and composite membranes was discussed in this research. The zeolite materials were synthesized by hydrothermal syntheses using different reaction gels to modulate the Br?nsted acidity of the microporous structures. Spectrophotometric analyses were used to evaluate protein adsorption on these surfaces. This study revealed that zeolite chemical composition and structure influenced the kinetics of protein adsorption. Zeolite Y surface adsorbed greater amount of BSA than the other structures. The percentage of adsorption increases with temperature and depends on the pH of the solution, being highest at the pI of the protein. The influence of the membrane configuration on the protein adsorption was studied using different zeolite structures and crystallization types. It seems that the observed differences could depend on the type of hydrothermal crystallization inside the inorganic support.     

Silica nanoparticles for fluorescence sensing of Zn(II): exploring the covalent strategy

Silica nanoparticles (about 15 nm diameters), which contain a derivative of 6-methoxy-8-(p-toluensulfonamido)-quinoline (TSQ) as a Zn(II) fluorescent probe covalently linked to the silica network, were prepared and studied as Zn(II) fluorescent chemosensors. The systems selectively detect Zn(II) ions in water rich solutions with a submicromolar sensitivity: 0.13 microM concentrations of Zn(II) can be measured with the only interference of Cu(II) and Cd(II) ions. Compared with free TSQ, the nanoparticles based systems have the advantage that they can be employed in aqueous solutions without aggregation problems while at the same time, they maintain a similar Zn(II) affinity and sensing ability. Addition of a second, substrate insensitive, fluorophore to the particles leads to the realization of a ratiometric sensor.     

Serum protein profiling in patients with inflammatory bowel diseases using selective solid-phase bulk extraction, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and chemometric data analysis

The identification of new biomarkers or a disease-related protein fingerprint for inflammatory bowel diseases (IBDs) represents a major task in the diagnosis, prognosis and pharmacological therapy. To address these issues, a simple and rapid analytical proteomic method for serum protein profiling based on selective beads-based solid-phase bulk extraction, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and chemometric data analysis was developed. Serum proteins from healthy subjects (22) and patients with Crohn's disease (15) and ulcerative colitis (26) were selectively extracted according to reversed-phase (C18), strong anion-exchange (SAX) and metal ion affinity (IDA-Cu(II)) principles. This approach allowed enrichment of serum proteins/peptides due to the high interaction surface between analytes and the solid phase and high recovery due to the elution step performed directly on the MALDI-target plate. The MALDI-TOF MS serum protein profiles were acquired and, after a data pre-processing step, analyzed by linear discriminant analysis (LDA), a chemometric classification technique, in order to classify serum samples among healthy subjects and patients with inflammatory bowel diseases (IBDs). Since the high number of variables in the MALDI spectra (more than 16000 m/z values) prevents the use of LDA, the variables were reduced to 10-20 by features selection, thus allowing the evaluation of a pattern of m/z values with high discriminant power. Serum protein profiles obtained by reversed-phase extraction and the selection of 20 m/z values gave the best overall prediction ability (96.9%). The recognition of these m/z values may allow the identification of protein biomarkers involved in IBDs.     

Synthesis and X-ray structure of the [{Fe3(CO)9(micro3-O)}2H]3- trianion: dimerization of a metal carbonyl cluster via formation of an exceptionally short hydrogen bond

The synthesis, structure and characterization of the [{Fe3(CO)9(micro3-O)}2H]3- trianion in its [Cs(THF)0.33]+ and [NEt4]+ salt are reported. The title dimeric cluster has been obtained by protonation in water or in organic solvent of the [Fe3(CO)9(micro3-O)]2- dianion to the hydroxo [Fe3(CO)9(micro3-OH)]- derivative and crystallization. The solid state structure of [Cs(THF)0.33]3[{Fe3(CO)9(micro3-O)}2H] is based on ionic packing of [Cs(THF)0.33]+ cations and [{Fe3(CO)9(micro3-O)}2H]3- trianions. The fractional formula is due to the particular packing of Cs+ cations, which are at the vertices of fused cuboctahedral and trigonal antiprismatic polyhedrons. Each cuboctahedron encapsulates a [{Fe3(CO)9(micro3-O)}2H]3- trianion, whereas each trigonal antiprism encapsulates a THF molecule. The possibility that the structure of the [{Fe3(CO)9(micro3-O)}2H]3- trianion could be affected by its confinement in the cuboctahedral cage of Cs+ ions and the heavy disorder of the THF molecule urged a further structural determination of the trianion with a completely different cation. The corresponding [NEt4]3[{Fe3(CO)9(micro3-O)}2H] salt has been, therefore, prepared and structurally characterized. The [{Fe3(CO)9(micro3-O)}2H]3- trianion displays an identical structure and almost coincident molecular parameters in both salts. Its most notable feature is represented by the unique hydrogen atom symmetrically bridging the micro3-O atoms of two different [Fe3(CO)9(micro3-O)]2- molecules and displaying one of shortest O...H...O interaction so far reported in organic, inorganic and organometallic literature. The structure of [Cs(THF)]2[Fe4(CO)13], which has been obtained as a by-product of the synthesis of [Cs(THF)0.33]3[{Fe3(CO)9(micro3-O)}2H], is also briefly reported.     

Note on the atomic correlation energy

In the introductory section, we compare the total, kinetic, nuclear-electron, Coulomb, exchange, and correlation energies of ground-state atoms. From the analyses of the data, one can conclude that the Hartree-Fock (HF) model is notably good and might require only a small perturbation to become essentially an “accurate” model. For this reason and considering past literature, we present a semiempirical extension of the HF model. We start with a calibration of three independent models, each one with an effective Hamiltonian, which introduces a small perturbation on the kinetic, the nuclear-electron, or the Coulomb HF operators. The perturbations are expressed as very simple functions of products of orbital probability density. The three perturbations yield very equivalent results and the computed ground-state energies are reasonably near to the accurate nonrelativistic energies recently provided by E. Davidson and his collaborators for the 2–18 electron systems and the estimates by Clementi and his collaborators for the 19–54 electron systems. The first ionization potentials from He to Cs, the second ionization potentials from Li to Zn, and excitation energies for npⁿ, 3dⁿ, and 4s¹3dⁿ configurations are used as additional verification and validation. The above three effective Hamiltonians are then combined in order to redistribute the correlation energy correction in a way which exactly satisfies the virial theorem and maintains the HF energy ratios between kinetic, nuclear-electron, and electron-electron interaction energies; the resulting effective Hamiltonian, named “virial constrained,” yields good quality data comparable to those obtained from the three independent effective operators. Concerning excitation energies, these effective Hamiltonians yield values only in modest agreement with experimental data, even if definitively superior to HF computations. To further improve the computed excitation energies, we applied an empirical scaling in the vector coupling coefficient; this correction yields very reasonable excitations for all the configurations that we have considered. We conclude that the use of effective potentials to introduce small perturbations density-dependent onto the HF model constitutes a broad class of practical and reliable semiempirical solutions to atomic many-electron problems, can provide an alternative to popular proposals from density functional theory, and should prepare the ground for “generalized HF models.” © 1997 John Wiley & Sons, Inc. Int J Quant Chem 62: 571–591, 1997     

Chemical and Mechanical Characterization of Licorice Root and Palm Leaf Waste Incorporated into Poly(urethane-acrylate) (PUA)

A poly(urethane-acrylate) polymer (PUA) was synthesized, and a sufficiently high molecular weight starting from urethane-acrylate oligomer (UAO) was obtained. PUA was then loaded with two types of powdered ligno-cellulosic waste, namely from licorice root and palm leaf, in amounts of 1, 5 and 10%, and the obtained composites were chemically and mechanically characterized. FTIR analysis of final PUA synthesized used for the composite production confirmed the new bonds formed during the polymerization process. The degradation temperatures of the two types of waste used were in line with what observed in most common natural fibers with an onset at 270 °C for licorice waste, and at 290 °C for palm leaf one. The former was more abundant in cellulose (44% vs. 12% lignin), whilst the latter was richer in lignin (30% vs. 26% cellulose). In the composites, only a limited reduction of degradation temperature was observed for palm leaf waste addition and some dispersion issues are observed for licorice root, leading to fluctuating results. Tensile performance of the composites indicates some reduction with respect to the pure polymer in terms of tensile strength, though stabilizing between data with 5 and 10% filler. In contrast, Shore A hardness of both composites slightly increases with higher filler content, while in stiffness-driven applications licorice-based composites showed potential due to an increase up to 50% compared to neat PUA. In general terms, the fracture surfaces tend to become rougher with filler introduction, which indicates the need for optimizing interfacial adhesion.