Performance of a fast fiber based UV/Vis multiwavelength detector for the analytical ultracentrifuge

The optical setup and the performance of a prototype UV/Vis multiwavelength analytical ultracentrifuge (MWL-AUC) is described and compared to the commercially available Optima XL-A from Beckman Coulter. Slight modifications have been made to the optical path of the MWL-AUC. With respect to wavelength accuracy and radial resolution, the new MWL-AUC is found to be comparable to the existing XL-A. Absorbance accuracy is dependent on the light intensity available at the detection wavelength as well as the intrinsic noise of the data. Measurements from single flashes of light are more noisy for the MWL-AUC, potentially due to the absence of flash-to-flash normalization in the current design. However, the possibility of both wavelength and scan averaging can compensate for this and still give much faster scan rates than the XL-A. Some further improvements of the existing design are suggested based on these findings.     

Synthesis of new chiral calix[4]azacrowns for enantiomeric recognition of carboxylic acids

Two novel chiral calix[4]azacrown ethers 4 and 5 bearing a furfuryl group on the nitrogen atom were developed by the reaction of dibromo- or ditosyl derivatives of p-tert-butylcalix[4]arenes 2 and 3 with a chiral diol, 1. The enantioselective recognition of these receptors towards the enantiomers of racemic carboxylic acids has been studied by ¹H NMR spectroscopy. The molar ratio and the association constants of the chiral compounds 4 and 5 with each of the enantiomers of guest molecules were determined by using Job plots and a nonlinear least-squares fitting method, respectively. The Job plots indicate that both of the hosts form 1:1 instantaneous complexes with (R)- or (S)-mandelic acid and (l)- or (d)-dibenzoyltartaric acid. The receptors exhibited different chiral recognition abilities towards the enantiomers of racemic guests.     

Inequalities for real number sequences with applications in spectral graph theory

Czechoslovak Mathematical Journal - Let a = (a1,a2, …, an) be a nonincreasing sequence of positive real numbers. Denote by S = {1, 2, …, n} the index set and by Jk = {I = {r1, r2,...     

Separation and preconcentration of mercury in water samples by ionic liquid supported cloud point extraction and fluorimetric determination

We have developed a cloud point extraction procedure based on room temperature ionic liquid for the preconcentration and determination of mercury in water samples. Mercury ion was quantitatively extracted with tetraethyleneglycol-bis(3- methylimidazolium) diiodide in the form of its complex with 5,10,15,20-tetra-(4-phenoxyphenyl)porphyrin. The complex was back extracted from the room temperature ionic liquid phase into an aqueous media prior to its analysis by spectrofluorimetry. An overall preconcentration factor of 45 was accomplished upon preconcentration of a 20?mL sample. The limit of detection obtained under the optimal conditions is 0.08?μg mL^?1, and the relative standard deviation for 10 replicate assays (at 0.5?g mL^?1 of Hg) was 2.4%. The method was successfully applied to the determination of mercury in tap, river and mineral water samples.

Use of pyrocatechol violet modified sodium dodecyl sulfate coated on alumina for separation and preconcentration of uranium(VI)

A sensitive and selective solid phase extraction procedure for the determination of trace of uranium(VI) has been developed. An alumina-sodium dodecyl sulfate coated on with pyrocatechol violet was used for preconcentration and determination of uranyl ions by spectrophotometry method using Arsenazo III reagent. Sorbed ions were quantitatively eluted using 5 mL of 0.25 mol L⁻¹ HNO₃. The effects of parameters such as pH, amount of alumina, amount of ligand, flow rate, type and concentration of elution agent were examined. The capacity of the sorbent for U(VI) was found to be 0.92 mmol g⁻¹. The relative standard deviation was 1.28% for 10 replicate determinations of U(VI) ion in a solution with a concentration of 1.0 μg mL⁻¹. The practical applicability of the developed sorbent was examined using synthetic and real samples such as standard reference material 2709 (San Joaquin Soil) and 2711 (Montana Soil).     

Fabrication and characterization of anhydrous polymer electrolyte membranes based on sulfonated poly(vinyl alcohol) and benzimidazole

In the present study, a new type of chemically cross-linked polymer blend membranes consisting of poly(vinyl alcohol) (PVA), sulfosuccinic acid (SSA) and benzimidazole (BnIm), as a dopant, at different stoichometric ratios were prepared and used as proton conducting polymer electrolytes. The proton conductivities of the membranes were investigated as a function of blending composition and the temperature. TGA indicated that the blend polymers were thermally stable up to approximately 175°C; differential scanning calorimetry (DSC) results illustrated the homogeneity of the materials. The local chain flexibility of the host polymer increased with BnIm concentration. The methanol permeability values of the membranes were much lower than that of a Nafion-membrane. The proton conductivity of these materials increased with BnIm and SSA concentration and the temperature.     

Calculation of vacancy transfer probabilities from K to L shell using the X-ray fluorescence parameters

The probabilities for vacancy transfer from the K to the L shell (η_KL), have been calculated for eleven high atomic number elements using the measured K and L shells X-ray production cross-sections. The targets were excited by 123.6 keV photon from a ⁵⁷Co annular radioactive source. K and L X-rays emitted by samples were counted with a Si(Li) detector. The measured values of η_KL were compared with the theoretical values and our early papers.     

An EPR study of Cu doped diaquabis(nicotinamide)bis(o-sulfobenzimidato-N)-cadmium(II) single crystals

The electron paramagnetic resonance spectra of Cu²⁺ doped diaquabis(nicotinamide)bis(o-sulfobenzimidato-N)-cadmium(II) (hereafter, CdNAS) single crystals which were taken at room temperature are discussed. It was found from the analysis of the EPR data that the Cu²⁺ ions substitute for magnetically inequivalent Cd²⁺ ions. Two magnetically inequivalent Cu²⁺sites were observed. The principal values of the g and the hyperfine tensors were determined. The ground state wave functions of the unpaired electron of Cu²⁺ ions in two sites were constructed and type of the distortion was determined.     

Determination of the surfactant density on SWCNTs by analytical ultracentrifugation

We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and time allows the determination of the anhydrous specific volumes of the SWCNT-surfactant complexes as well as the concentration of the surfactant reservoir in free micelles with very slow sedimentation coefficients (<1 Svedberg). Among the perylene bisimide surfactants, the smallest derivative is densely adsorbed on the nanotube backbone with an anhydrous specific volume significantly above that of SC or SDBS. Bulky Newkome dendritic groups on one or both ends of the perylene moiety gradually reduce the adsorption density, in accord with the absolute adsorption between 0.66 and 1.7 mmol surfactant per gram SWCNTs. Furthermore, hydrodynamic analysis reveals that SDBS favors the "tails-on" configuration. The distribution of sedimentation coefficients of SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco) is broader and shifted to faster sedimentation than those prepared by using cobalt-molybdenum catalysis (CoMoCAT), which reflects the polydispersity in diameter and length.     

Diabetes induces compositional, structural and functional alterations on rat skeletal soleus muscle revealed by FTIR spectroscopy: a comparative study with EDL muscle

Diabetes Mellitus (DM) is a metabolic disorder, characterized by abnormally high blood glucose levels due to decreased secretion or effectiveness in function of insulin. Having a role in carbohydrate and lipid metabolism, skeletal muscle is affected by the absence of insulin in diabetic conditions. This current study reports the application of Fourier transform infrared (FTIR) spectroscopy in the determination of macromolecular alterations in streptozotocin (STZ)-induced diabetic rat skeletal Soleus (SOL) muscles, which highlight the promise of this technique in medical research. The results revealed that DM induced several alterations in macromolecular content and structure of slow-contracting SOL muscles. In diabetic SOL muscles, a decrease in the content of lipids, proteins and nucleic acids together with an increase in lipid order was observed. The decrease in the level of unsaturation and acyl chain length of lipids demonstrated the increased lipid peroxidation in DM. There were alterations in protein secondary structure in DM with a decrease in α-helix and β-sheet content of proteins, whereas the content of aggregated β-strands increased, which is generally seen when proteins denature. Besides, the integrity of collagen molecules was found to be decreased, demonstrating the alterations in its triple helical structure in diabetic muscles. Furthermore, the same alterations mentioned above were also observed in diabetic fast-contracting Extensor Digitorum Longus (EDL) muscles. However, having a high content of mitochondria and relying on an oxidative pathway, SOL muscle was found to be more affected by DM.