The influence of nitridation time on the structural properties of GaN grown on Si (111) substrate

In the present paper, the effect of in-situ substrate nitridation time on crystalline quality of GaN films grown on Si (111) substrates by metal organic chemical vapor deposition (MOCVD) were investigated. A thin buffer layer of silicon nitride (SiN _x ) with various thicknesses was achieved through the nitridation of substrate at different nitiridation times ranging from 0 to 660 s. The structural characteristics, such as dislocation densities, correlation lengths of columnar crystallites, the tilt and twist of the mosaic structure, and the angles of rotational disorder, were all studied in detail by using a planar and cross-sectional view of high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (HRXRD) performed at different scattering geometries. It was found that the dislocation densities, lateral coherence lengths, vertical coherence lengths, and the tilt and twist of mosaic blocks in GaN films monotonically varies with the nitridation time. The experimental findings showed that the nitridation times had more influence on edge dislocation densities than the screw type.     

Rate effect on sharing of passive lumbar motion segment under load-controlled sagittal flexion: viscoelastic finite element analysis

Industrial epidemiological studies have shown that jobs requiring a higher speed of trunk motion contribute to a higher risk of industrial low back disorders. Consideration of the loading dynamic characteristics, such as lifting at different speeds, requires modeling of the viscoelastic behavior of passive tissues. Detailed systematic analysis of the effects of loading rate has been lacking in the literature. A validated viscoelastic finite element model of a L2–L3 motion segment was used to identify the load sharing among the passive elements at different loading rates. Force controlled complex flexion movement was simulated by applying load at the top of the upper vertebra without constraining any coupled sagittal rotation, whereas the lower vertebra was fixed at the bottom. The load reached its maximum values of 2000 N compression, 400 N anterior shear, and 20 Nm flexion in three different durations of 0.3, 3 and 30 s to represent fast, medium and slow movement. The global force–displacement response of the motion segment, forces in facet joints and ligaments, stresses and strains in anulus fibrosus, and intradiscal pressure were compared across different rates. The higher rate of loading while reaching a prescribed complex forward flexion loading increased the intradiscal pressure and the stress in the anulus fibers at the posterolateral innermost layers, but reduced the global displacements, ligament forces and facet joint forces. The distribution of stress and strain was markedly affected by the loading rate. Consideration of the time-dependent material properties of passive elements is essential to improve our understanding of the responses of the motion segment to dynamic loading conditions. Speed of the manual materials handling (MMH) tasks should be included as a risk factor in the biomechanical and epidemiological studies and guidelines for safe lifting.     

Comparison of flow structures in the downstream region of a cylinder and sphere

An experimental investigation of flow structures downstream of a circular cylinder and sphere immersed in a free-stream flow is performed for Re = 5000 and 10,000 using qualitative and quantitative flow visualization techniques. The obtained results are presented in terms of time-averaged velocity vectors, patterns of streamlines, vorticity, Reynolds stress correlations and turbulent kinetic energy distributions. Flow data reveal that the size of wake flow region, the location of singular and double points, the peak values of turbulence quantities, such as Reynolds stress correlations, vorticity fluctuations and turbulent kinetic energy vary as a function of models’ geometry and Reynolds Numbers. The concentration of small scale vortices is more dominant in the wake of the sphere than that of the cylinder. The maximum value of turbulent kinetic energy (TKE) occurs close to the saddle point for the cylinder case while two maximum values of TKE occur along shear layers for the sphere one because of the 3-D flow behavior.     

Weakly distributive modules. Applications to supplement submodules

In this paper, we define and study weakly distributive modules as a proper generalization of distributive modules.We prove that, weakly distributive supplemented modules are amply supplemented. In a weakly distributive supplemented module every submodule has a unique coclosure. This generalizes a result of Ganesan and Vanaja. We prove that π-projective duo modules, in particular commutative rings, are weakly distributive. Using this result we obtain that in a commutative ring supplements are unique. This generalizes a result of Camillo and Lima. We also prove that any weakly distributive ⊕-supplemented module is quasi-discrete.     

An assessment of the poincare scheme for non-linear oscillators and an improvement of its range of validity

The range of validity of the Poincare method is studied by comparison with the exact solution for the anharmonic and Morse oscillators. The exact solutions for these cases are expressible respectively in terms of elliptic and inverse trigonometric functions. The oscillation frequency is taken as the basis for the comparison. It is seen that the Poincare perturbation gives fairly accurate results up to amplitudes that are 20–30 per cent of the maximum value allowed for periodic solutions depending on the form of the potential energy. A new method is presented as a slight variation over the standard Poincare method. This method differs from the former only by a rearrangement of the differential equation through a collocation approximation for the potential. In spite of its simplicity, the method proves to be a better approximation than the standard Poincare method and gives remarkably accurate results for amplitudes up to 60–70 per cent of the maximum value allowed for periodic solutions.     

Determining the interaction and characterization of asphaltene in alkylbenzene solvents using nuclear-electron double resonance

This study uses ¹H dynamic nuclear polarization (DNP) methods to determine asphaltene aggregates and the interaction between asphaltene extracted from MC800 asphalt and alkylbenzene solvents, as well as elemental analysis for the characterization of asphaltene. The asphaltene sample was characterized using the elemental analysis of carbon (C), hydrogen (H), nitrogen (N), and sulfur (S). The results show that asphaltenes have the highest carbon content. The sulfur and hydrogen contents are nearly the same and nitrogen content is the smallest. The DNP data provided good results for characterizing asphaltene behavior in alkylbenzene solvents.     

In situ preparation of rhodium/n‐heterocyclic carbene complexes and use for addition of arylboronic acids to aldehydes

The in situ prepared three component system [RhCl(COD)]₂/imidazolidinium salts ( 2, 4 ) and KOBu^t catalyses the addition of phenylboronic acid to sterically hindered aldehydes affording the corresponding arylated secondary alcohols in good yields. Four novel 1,3‐dialkylimidazolidinium ( 2‐4 ) salts as NHC precursors were synthesized from N,N′‐dialkylethylenediamine.     

A Novel Lanthanide Complex with Remarkable Phosphodiester Transesterification Activity and DNA-Conjugatable Functionality

Encapsulated lanthanide complexes like the TCMC complexes are highly stable under physiological conditions. With the ultimate goal being an in vivo application of these complexes as a sequence-selective RNA/DNA cleaving agent (artificial RNAse/DNAse), kinetic stability of the complex would be a distinct advantage. We have synthesized a novel lanthanide complex with such stability and which displays high transesterification activity. The most important attribute of this compound is the nitrophenyl group which would allow further derivatization and conjugation to a DNA oligomer, thus creating a potential for the sequence selective hydrolysis of its target.     

A telluride-triggered nucleophilic ring opening of monoactivated cyclopropanes

[reaction: see text] Acylcyclopropanemethanol tosylates undergo rapid ring opening at room temperature by the action of lithium telluride to produce the enolate of a homoallylic ketone. The enolate can be protonated to yield the corresponding ketone or treated with benzaldehyde to give the aldol product with good syn or anti diastereoselectivity depending on the conditions.     

Calculation of vacancy transfer probabilities from K to L shell using the X-ray fluorescence parameters

The probabilities for vacancy transfer from the K to the L shell (η_KL), have been calculated for eleven high atomic number elements using the measured K and L shells X-ray production cross-sections. The targets were excited by 123.6 keV photon from a ⁵⁷Co annular radioactive source. K and L X-rays emitted by samples were counted with a Si(Li) detector. The measured values of η_KL were compared with the theoretical values and our early papers.