Quantum conductance investigation on carbon nanotube–based antibiotic sensor

Journal of Solid State Electrochemistry - Nanostructured carbon material (NSCM) based chemiresistive sensors are popular for sensing different analytes because of their high sensitivity, low cost,...     

Mg-catalyzed one-pot preparation of benzimidazoles and spirooxindoles by an immobilized chlorophyll b on magnetic nanoparticles

Chlorophyll b was extracted from Heliotropium europaeum plant, then immobilized on magnetic nanoparticles (Fe₃O₄@SiO₂@Chl-Mg) and found as an efficient and green catalyst for the preparation of a variety of benzimidazoles and spirooxindoles in mild conditions. The catalyst was fully characterized by Fourier-transform infrared (FTIR), ultraviolet–visible (UV–vis) spectroscopy, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric (TGA), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and dynamic light scattering (DLS) analyses. To prove the catalytic influence of Mg over the reactions, the catalytic activity of the demetalated chlorophyll b as well as some other control experiments was investigated. High to excellent yields were achieved for all entries, whether benzimidazole or spirooxindole derivatives at short reaction times. The catalyst could be recovered and reused for several consecutive runs by a simple external magnetic field without any considerable reactivity loss. The properties of the recovered catalyst were investigated by various analyses. Finally, the reasonable mechanisms were proposed for the reactions based on the literature.     

Mixed convection enhancement by using optimized porous media and nanofluid in a cavity with two rotating cylinders

Journal of Thermal Analysis and Calorimetry - Mixed convection inside a square cavity with internal rotating heater and cooler is analyzed numerically by simultaneous application of porous media...     

Fe3O4@SiO2 nanoparticles–functionalized Cu(II) Schiff base complex with an imidazolium moiety as an efficient and eco-friendly bifunctional magnetically recoverable catalyst for the Strecker synthesis in aqueous media at room temperature

Cu(II) Schiff base complex supported on Fe₃O₄@SiO₂ nanoparticles was employed as a magnetic nanocatalyst (nanocomposite) with a phase transfer functionality for the one-pot preparation of α-aminonitriles (Strecker reaction). The desired α-aminonitriles were obtained from the reaction of aromatic or aliphatic aldehydes, aniline or benzyl amine, NaCN, and 1.6 mol% of the catalyst in water at room temperature and good to excellent yields were obtained for all substrates. The catalyst was characterized analytically and instrumentally including Fourier-transform infrared spectroscopy, X-ray diffraction, thermogravimetric, nuclear magnetic resonance, energy-dispersive X-ray spectroscopy, inductively coupled plasma spectroscopy, vibrating-sample magnetometry analysis, dynamic light scattering, Brunauer–Emmett–Teller surface area, field emission scanning electron microscopy, and transmission electron microscopy analyses. The reaction mechanism was investigated, in which the performance of the catalyst as a phase transition factor seems to be probable. The catalyst showed high activity, high turnover frequency (TOF)s, significant selectivity, and fast performance toward the Strecker synthesis. The nanocatalyst can be readily and quickly separated from the reaction mixture with an external magnet and can be reused for at least seven successive reaction cycles without significant reduction in efficiency.     

Three-dimensional Pd/Pt bimetallic nanodendrites on a highly porous copper foam fiber for headspace solid-phase microextraction of BTEX prior to their quantification by GC-FID

The preparation of bimetallic Pd/Pt nanofoam for use in fiber based solid-phase microextraction (SPME) is described. First, a highly porous copper foam was prepared on the surface of an unbreakable copper wire by an electrochemical method. Then, the substrate was covered with metallic Pd and Pt using galvanic replacement of the Cu nanofoam substrate by applying a mixture of Pd(II) and Pt(IV) ions. The procedure provided an efficient route to modify Pd/Pt nanofoams with large specific surface and low loading with expensive noble metals. The fiber was applied to headspace SPME of benzene, toluene, ethylbenzene and xylene (BTEX) (as the model compounds) in various spiked water and wastewater samples. It was followed by gas chromatography-flame ionization detection (GC-FID). A Plackett-Burman design was performed for screening the experimental factors prior to Box-Behnken design. Compared with the commercial PDMS SPME fiber (100 μm), it had higher extraction efficiency for BTEX. Under the optimum conditions, the method has low limits of detection (0.16–0.35 μg L^?1), a wide linear range (1–200 μg L^?1), relative standard deviations between 5.8 and 10.5%, and good recoveries (>85% from spiked samples).

Open image in new window

Graphical abstract Schematic presentation of a three-dimensional Pd/Pt bimetallic nanodendrites supported on a highly porous copper foam fiber for use in headspace solid phase microextraction of BTEX. They were then quantified by gas chromatography–flame ionization detector.

     

Numerical investigation of mixed convection heat transfer of a nanofluid in a circular enclosure with a rotating inner cylinder

Journal of Thermal Analysis and Calorimetry - In the present paper, mixed convection heat transfer of water–Al2O3 nanofluid in the space between two cylinders is investigated numerically. The...     

Magnetic solid-phase extraction of warfarin and gemfibrozil in biological samples using polydopamine-coated magnetic nanoparticles via core-shell nanostructure

Herein, polydopamine-coated Fe₃O₄ spheres were synthesized using a very simple, easy, cost-effective, efficient, and fast method. First, magnetic nanoparticles (Fe₃O₄) were synthesized and were followed by accommodating polydopamine on the surface of the prepared Fe₃O₄. The prepared polydopamine-coated Fe₃O₄ spheres were utilized as a sorbent in magnetic solid phase extraction of gemfibrozil and warfarin (as the model analytes). The extracted model analytes were desorbed by a suitable organic solvent and were analyzed by high-performance liquid chromatography. Under optimized condition, the linearity of the method was in the range of 0.1–200.0 μg/L for the selected analytes in water. The limits of detection were calculated to be in the range of 0.026–0.055 μg/L for warfarin and gemfibrozil, respectively. The limits of quantification were calculated to be in the range of 0.089–0.185 μg/L. The inter-day and intra-day relative standard deviations were determined to be in the range of 1.4%–3.3% in three concentrations in order to calculate the method precision. Furthermore, the enrichment factors were found to be 78 and 81 for warfarin and gemfibrozil, respectively. Moreover, the calculated absolute recoveries were between 78% and 81%. The obtained recoveries indicated that the method was useful and applicable in complicated real samples.     

Theoretical modeling for thermophysical properties of cellulose: pressure/volume/temperature data

Thermo-compression process—compression of pure cellulose under high temperatures and pressures—is a recent method to produce biodegradable materials. For such processes, experimental measurements and study of properties and behavior of cellulose are difficult to carry out. To overcome these difficulties, a complete pressure–volume–temperature investigation is needed as carried out in this work. To develop a predictive thermodynamic PVT model of cellulose theoretically, the modified Sanchez and Lacombe equation of state together with the implementation of the Hoftyzer and van Krevelen group contribution method and the Boudouris modification to the Constantinou and Gani’s group contribution method were coupled to the Compressible Regular Solution theory. The developed method is a pure predictive model and to examine the accuracy of theoretically calculated PVT data by the model, some available PVT data of cellulose at temperatures from 25 to 180 °C and pressures from 19.6 to 196 MPa (219 data points) were collected from literature. The comparisons were made and the agreement between the calculations and the experimental data were acceptable with a Cumulative Absolute Relative Deviation of 0.04 %. Consequently, the model can be used for prediction of thermodynamic properties of cellulose and cellulose-containing mixtures.     

Synthesis and Characterization of a Fluorescent Water-Borne Polyurethane Based on a Novel Naphthalimide Dye

A waterborne-polyurethane (WPU) dye, based on the fluorescent dye 4-diamino propane-N-allyl-1,8- naphthalimide (WPU-DAN), was synthesized by attaching 4-diamino propane-N-allyl-1,8- naphthalimide (DAN) onto both ends of the polyurethane (PU) chains according to a prepolymer?ionomer process. The synthetic process was confirmed by Fourier transform infrared spectroscopy (FTIR) and UV-visible absorption. The glass transition temperature, molecular weight and average particle sizes were measured. The glass transition temperatures of WPU and WPU-DAN were 46.6 and 49.8°C, respectively. In addition, the particle size distributions of WPU-DAN and WPU were 140 and 134 nm, respectively. The thermal behaviour of WPU-DAN showed improvement compared to WPU. The fluorescence intensity of WPU-DAN was enhanced more than DAN due to the naphthalimide groups attached to the chains, and the fluorescence intensity of WPU-DAN and DAN were increased by increasing temperature. Moreover, the fluorescence intensity of WPU-DAN emulsion was stable during 30 days and no loss of fluorescence intensity occurred for these days.