Synthesis and properties of new glucocationic surfactants: model structures for marking cationic surfactants with carbohydrates

[reaction: see text] In this work, we report the synthesis of a new series of glucocationic surfactants, a class of surfactants we introduced very recently. The preparation of the surfactants is based on the synthesis of the 2-bromoethyl-2,3,4,6-tetra-O-acetyl-beta-D-glucopyranoside, whose preparation was studied in order to improve yields and stereoselectivity of this key intermediate. These glucocationic amphiphiles were prepared and studied as a model of cationic surfactants marked with a carbohydrate moiety. The use of carbohydrates as markers on cationic lipids was recently introduced to induce recognition by specific receptors, present on the surface of cell membranes. The chemicophysical characterization of these model structures can give more insight on the aggregation behavior. Conductivity and surface tension measurements were performed in order to characterize the compounds from the amphiphilic point of view. The results showed a different effect of the glucosidic moiety on the cmc value with respect to the glucopyridinium cationic surfactants. The surfactants also showed the tendency to form premicellar aggregates in solution when the hydrophobicity is raised.     

Study of the thermal behavior of Al(III) and In(III)-diclofenac complexes in solid state

The Al and In-diclofenac compounds were prepared. Thermogravimetry (TG) and X-ray diffraction powder patterns were used to characterize these compounds. Details concerning the dehydration and thermal decomposition as well as data of kinetic parameters have been described here. The kinetic studies of these stages were evaluated from several heating rates with mass sample of 2 and 5 mg in open crucibles under nitrogen atmosphere. The results of the present study improve the knowledge on these compounds including their dehydration and thermal stability. The obtained data leads to a dependence on the sample mass, which results in two kinetic behavior patterns.     

Chemical composition and possible in vitro antigermination activity of three Hypericum essential oils

The essential oils of Hypericum perforatum, H. perfoliatum and H. hircinum, growing in Southern Italy, were analyzed by GC and GC/MS. In the three oils, 111 compounds in all were identified: 53 for the oil of H. hircinum (93.7% of the total oil), 55 for H. perforatum (96.5% of the total oil) and 63 for H. perfoliatum (98.7% of the total oil). The major fraction of the essential oils of H. perforatum and H. hircinum was represented by sesquiterpene hydrocarbons, while the monoterpene alpha-pinene, and the phenol thymol were the most abundant compounds in the essential oil of H. perfoliatum. The oils were evaluated for their potential in vitro phytotoxic activity against germination and early radicle elongation of Raphanus sativus and Lepidium sativum. The germination of this latter was significantly inhibited by the essential oil of H. hircinum, at the highest doses tested, whereas radicle elongation of garden cress was significantly inhibited by the essential oils of H. perfoliatum and H. hircinum. The radicle elongation of radish was inhibited by the essential oil of H. hircinum to a major extent and by H. perforatum and perfoliatum in a minor measure.     

Hydrophobic interaction chromatography coupled with atomic fluorescence spectrometric detection Effect of the denaturation on the determination of thiolic proteins

Hydrophobic interaction chromatography coupled online with chemical vapour atomic fluorescence spectrometry (HIC-CVGAFS) has been optimized for the analysis of thiolic proteins in denaturing conditions. Proteins are pre-column simultaneously denatured and derivatized in phosphate buffer solution containing 8.0 mol dm⁻³ urea and p-hydroxymercurybenzoate (PHMB) and the derivatized denatured proteins are separated on a silica HIC Eichrom Propyl column in the presence of 8.0 M urea in the mobile phase. Post-column online reaction of derivatized denatured proteins with bromine, generated in situ by KBr/KBrO₃ in HCl medium, allowed the fast conversion of the uncomplexed PHMB and of the PHMB bound to proteins to inorganic mercury also in presence of urea. Hg²⁺, present in solution as Hg²⁺-urea complex, is selectively detected by AFS in a Ar/H₂ miniaturized flame after sodium borohydride reduction to Hg. Under optimized conditions, online bromine treatment gives a 100±2% recovery of both free and protein-complexed PHMB. Denatured glyceraldehyde-3-phosphate dehydrogenase, aldolase, lactate dehydrogenase, trioso phosphate isomerase and β-lactoglobulin have been examined. As the sensitivity and limit of detection of proteins in the HIC-CVGAFS apparatus depends on number of SH groups reacting with PHMB, the denaturation process, which increases the number of PHMB-reactive thiolic groups in proteins, improves the analytical performances of the described system in protein analysis. The detection limit for the denatured proteins examined was found in the range of 10⁻¹⁰-10⁻¹² mol dm⁻³, depending on the considered protein, with linear calibration curves spanning over four decades of concentration.     

On the applicability of the HSAB principle through the use of improved computational schemes for chemical hardness evaluation

Finite difference schemes, named Compact Finite Difference Schemes with Spectral-like Resolution, have been used for a less crude approximation of the analytical hardness definition as the second-order derivative of the energy with respect to the electron number. The improved computational schemes, at different levels of theory, have been used to calculate global hardness values of some probe bases, traditionally classified as hard and soft on the basis of their chemical behavior, and to investigate the quantitative applicability of the HSAB principle. Exchange acid-base reactions have been used to test the HSAB principle assuming the reaction energies as a measure of the stabilization of product adducts.     

S-Adenosyl methionine/S-adenosyl-L-homocysteine ratio determination by capillary electrophoresis employed as a monitoring tool for the antiviral effectiveness of adenosine analogs

S-Adenosyl-L-homocysteine hydrolase (SAHh) inhibitors have long been used as broad-range antivirals and have been recently evaluated as an experimental therapy of filovirus infections. In response to the need for a rapid laboratory testing method that could assess antiviral potency in vivo, our group developed a capillary electrophoresis (CE) method for the determination of the S-adenosyl-L-homocysteine (SAH) to S-adenosyl-L-methionine (SAM) ratio. After chloroacetaldehyde derivatization, SAH and SAM were detected using laser-induced fluorescence detection with a HeCd laser. Separation and quantitation of both SAH and SAM in human plasma were achieved in less than 1 min. The proposed method is rapid and reliable, and could be easily applied to routine monitoring of clinical and preclinical trials subjects.     

A HTS Assay for the Detection of Organophosphorus Nerve Agent Scavengers

A new pro‐fluorescent probe aimed at a HTS assay of scavengers is able to selectively and efficiently cleave the P? S bond of organophosphorus nerve agents and by this provides non‐toxic phosphonic acid has been designed and synthesised. The previously described pro‐fluorescent probes were based on a conventional activated P? Oaryl bond cleavage, whereas our approach uses a self‐immolative linker strategy that allows the detection of phosphonothioase activity with respect to a non‐activated P? Salkyl bond. Further, we have also developed and optimised a high‐throughput screening assay for the selection of decontaminants (chemical or biochemical scavengers) that could efficiently hydrolyse highly toxic V ‐type nerve agents. A preliminary screening, realised on a small α‐nucleophile library, allowed us to identify some preliminary “hits”, among which pyridinealdoximes, α‐oxo oximes, hydroxamic acids and, less active but more original, amidoximes were the most promising. Their selective phosphonothioase activity has been further confirmed by using PhX as the substrate, and thus they offer new perspectives for the synthesis of more potent V nerve agent scavengers.     

Poly(ε-caprolactone) modified by functional groups: Preparation and chemical–physical investigation

Functionalization of polymers is a particular relevant approach in the field of biodegradable polymers, where modifications are often required to allow these materials to replace more conventional, not biodegradable polymers in a wider range of applications. This article will report on functionalization of poly(ε-caprolactone) with unsaturated monomers bearing either anhydride groups (PCL-g-(MA-GMA)) or tertiary amines (PCL-g-DMAEA), obtained through radical grafting in a Brabender mixer. Crystallization kinetics parameters have been determined with several techniques (rheology, optical microscopy and differential scanning calorimetry) and the results obtained are in good agreement. It was observed that the crystallization rate significantly increases in the case of the modified polymers.     

Metrological traceability is not always a straight line

The two most important concepts in metrology are certainly “traceability to standards” and “measurement uncertainty evaluation”. So far the questions related to these concepts have been reasonably solved in the metrology of “classical quantities”, but for the introduction of metrological concepts in new fields, such as chemistry and biology, a lot of problems remain and must be solved in order to support international arrangements. In this presentation, the authors want to develop the strategy implemented at Laboratoire national de métrologie et d’essais (LNE) in metrology in chemistry and biology. The strategy is based on: (1) pure solutions for calibration of analytical instruments, (2) use of certified reference materials (matrix reference materials), and (3) participation to proficiency testing schemes. Examples will be presented in organic and inorganic chemistry. For laboratory medicine, proficiency testing providers play an important role in the organization of External Quality Assessment Schemes. For the time being, the reference value or the assigned value of the comparison is calculated with the results obtained by the participants. This assigned value is not often traceable to SI units. One of the methods suggested by LNE is to ensure the metrological traceability to SI units of the assigned value for the more critical quantities carried on analytes by implementing the Joint committee for traceability in laboratory medicine reference methods.     

A self-consistent field study of a hydrocarbon droplet at the air-water interface

A molecularly detailed self-consistent field (SCF) approach is applied to describe a sessile hydrocarbon droplet placed at the air-water interface. Predictions of the contact angle for macroscopic droplets follow from using Neumann's equation, wherein the macroscopic interfacial tensions are computed from one-gradient calculations for flat interfaces. A two-gradient cylindrical coordinate system with mirror-like boundary conditions is used to analyse the three dimensional shape of the nano-scale oil droplet at the air-water interface. These small droplets have a finite value of the Laplace pressure and concomitant line tension. It has been calculated that the oil-water and oil-vapour interfacial tensions are curvature dependent and increase slightly with increasing interfacial curvature. In contrast, the line tension tends to decrease with curvature. In all cases there is only a weak influence of the line tension on the droplet shape. We therefore argue that the nano-scale droplets, which are described in the SCF approach, are representative for macroscopic droplets and that the method can be used to efficiently generate accurate information on the spreading of oil droplets at the air-water interface in molecularly more complex situations. As an example, non-ionic surfactants have been included in the system to illustrate how a molecularly more complex situation will change the wetting properties of the sessile drop. This short forecast is aimed to outline and to stress the potential of the method.