A frequency response model in multiquantum well lasers with unequilibrium carrier transport

A carrier transport model to explain the high-frequency response in high-speed MQW lasers is described. The ambipolar approximation, which is unsuitable for dealing with the high-speed carrier dynamics in MQW structures, was not adopted for small-signal analysis. The carrier transport effect can be characterized by four time constants: the electron transport time, _bmn; the hole transport time, _bmp; the electron escape time, _wbn; and the hole escape time, _wbp. The frequency response was interpreted as the sum of the constant response term due to the fast electron current and the roll-off term due to the slow hole transport time. The ratio of the electron contribution to the total response was proportional to the ratio of electron contribution to the total differential gain, , and reciprocally proportional to _n0 = 1 + _bmn/_wbn. The value of was calculated to be about 0.5 for typical MQW lasers. The roll-off frequency is mainly determined by . The ratio _p0 = 1 + _bmp/_wbp affects the resonant frequency and the damping rate in the high-bias condition.     

Non-linear structures in the non-critical NSR string

We investigate the Ward identities of theW symmetry in the super-Liouville theory coupled to the super-conformal matter of central charge . The theory is classified into two chiralities. For the positive chirality, all gravitationally dressed scaling operators are generated from theq–1 gravitational primaries by one of the ring generators in the R-sector acting on them repeatedly. After fixing the normalizations of the dressed scaling operators, we find that the Ward identities are expressed in the form of theusual W _q algebra constraints as in the bosonic case:W _n ^(k+1) ,=0, (k=1,...,q–1;nZ1–k), where the equations for even and oddn come from the currents in the NS- and the R-sector respectively. The non-linear terms come from the anomalous contributions at the boundaries of moduli space. The negative chirality is defined by interchanging the roles ofp andq. Then we get theW _p algebra constraints.     

Nitrosation of Phenolic Substrates under Mildly Basic Conditions: Selective Preparation of p-Quinone Monooximes and Their Antiviral Activities

Nitrosation of 3-methoxyphenol and 1-naphthol were examined under both acidic (NaNO(2)-EtCO(2)H-H(2)O) and basic (i-AmNO(2)-K(2)CO(3)-DMF) conditions. Acidic nitrosations afforded ortho-directed products, whereas para-directed nitrosations were observed under basic conditions to yield p-quinone monooximes. The basic para-directed nitrosation was further examined using 15 phenols, two naphthols, and four phenolic heterocyclics. A one-pot operation of the basic nitrosation followed by methylation with dimethyl sulfate gave the corresponding methyl ethers in high yield. Two p-quinone monooximes derived from 3-methoxyphenol and 8-hydroxyquinoline showed a moderate activity against HSV-1, and the latter oxime was also effective against HSV-2. On the other hand, p-quinone monooximes derived from methyl salicylate, 1-naphthol, 7-hydroxy-2-methylbenzo[b]furan, and 8-hydroxycoumarin showed the comparable activity to that of DDI against HIV-1.     

NAD(P)+-NAD(P)H models. 90. Stereoselection controlled by electronic effect of a carbonyl group in oxidation of NAD(P)H analog

4-Monodeuterated NAD(P)H model compounds (1,4,6,7-tetrahydro-1,6,11-trimethyl-5-oxo-5H-benzo[c]pyrido[2,3-e]az epin; 11Me-MMPAH) have been oxidized with a series of p-benzoquinone and its derivatives in the presence of Mg2+. The models have an axial chirality with respect to the orientation of carbonyl dipole, the dihedral angle of which is larger than 55 degrees out of the plane of dihydropyridine ring. Without Mg2+, the anti- (with respect to the carbonyl dipole) hydrogen is 3 to 32 times more reactive than the corresponding syn-hydrogen, whereas, when Mg2+ is present in the system, the selectivity is shifted toward the syn-preferency. Mg2+ plays the role of a Lewis acid catalyst to control the stereochemistry at the same time as it catalyzes the reaction.     

Coprecipitation with metal hydroxides for the determination of beryllium in seawater by graphite furnace atomic absorption spectrometry

Coprecipitation first with magnesium hydroxide, next with tin(IV) hydroxide is developed for the determination of traces of beryllium in sea-water. To a 200-ml sample is added a sodium hydroxide solution to form magnesium hydroxide at pH 11.5, on which beryllium is quantitatively coprecipitated. The precipitate is separated by centrifugation and dissolved in 2 ml of 12 mol/l hydrochloric acid. The resulting solution (ca. 10 ml) is mixed with 2 mg of tin (IV) carrier and the pH is adjusted to 5.0 to collect the beryllium on tin (IV) hydroxide, leaving magnesium ions in the solution. The tin (IV) hydroxide is centrifuged, dissolved in 0.1 ml of 5 mol/l hydrobromic acid, and then diluted to 1 ml with water. Magnesium is so added as to be 500 g/ml for increasing the sensitivity about four times, and the beryllium in the solution is determined by graphite furnace atomic absorption spectrometry. The experiments with synthetic seawater samples showed that pg — g amounts of beryllium can be coprecipitated on the metal hydroxides and beryllium at the low ng/1 level can be determined with reasonable precision (RSD < 10%). The detection limit of the proposed method is 0.5 ng/l of beryllium in seawater.     

Evolved gas detection of iron oxyhydroxides

A procedure is described for recording evolved gas detection (thermal desorption spectra) of various FeOOH samples up to 400°. Characteristic curves of -,- and-FeOOH are discussed, based on the crystallographic structure which governs the sites for physisorbed H₂O as well as OH groups producing H₂O by dehydration. Examinations are also made of the variations of the desorption spectra with the progress of crystallization for -FeOOH, and with the distortion of the crystal structure caused by the addition of Cu(II) to -, - and-FeOOH.