Unprecedented Reverse Volume Expansion in Spin-Transition Crystals

The current craze for research around the spin crossover phenomenon can be justified to some extent by the mechanical properties due to the decrease of volume associated with the transition of the metal ion from the HS state to the LS state. As demonstrated here, the molecular complex [Fe(PM-pBrA)₂(NCS)₂] exhibits, on the contrary, an increase of the unit-cell volume from HS to LS. This counter-intuitive and unprecedented behavior that concerns both the thermal and the photoexcited spin conversions is revealed by a combination of single-crystal and powder X-ray diffraction complemented by magnetic measurements. Interestingly, this abnormal volume change appears concomitant with the wide rotation of a phenyl ring which induces a drastic modification, though reversible, of the structural packing within the crystal. In addition, the light-induced HS state obtained through the Light-Induced Excited Spin-State Trapping shows a remarkably high relaxation temperature, namely T(LIESST), of 109 K, one of the highest so far reported. The above set of quite unusual characteristics opens up new fields of possibilities within the development of spin crossover materials.     

Local atomic and electronic structure in the LiVPO4(F,O) tavorite-type materials from solid-state NMR combined with DFT calculations

⁷Li, ³¹P, and ¹⁹F solid-state nuclear magnetic resonance (NMR) spectroscopy was used to investigate the local arrangement of oxygen and fluorine in LiVPO₄F_1-yO_y materials, interesting as positive electrode materials for Li-ion batteries. From the evolution of the 1D spectra versus y, 2D ⁷Li radiofrequency-driven recoupling (RFDR) experiments combined, and a tentative signal assignment based on density functional theory (DFT) calculations, it appears that F and O are not randomly dispersed on the bridging X position between two X–VO₄–X octahedra (X = O or F) but tend to segregate at a local scale. Using DFT calculations, we analyzed the impact of the different local environments on the local electronic structure. Depending on the nature of the VO₄X₂ environments, vanadium ions are either in the +III or in the +IV oxidation state and can exhibit different distributions of their unpaired electron(s) on the d orbitals. Based on those different local electronic structures and on the computed Fermi contact shifts, we discuss the impact on the spin transfer mechanism on adjacent nuclei and propose tentative signal assignments. The O/F clustering tendency is discussed in relation with the formation of short V^IVO vanadyl bonds with a very specific electronic structure and possible cooperative effect along the chain.     

Reactivity of an aminopyridine [LMnII]2+ complex with H2O2. Detection of intermediates at low temperature

In the present work we report the reactivity of [LMnII]2+ toward addition of hydrogen peroxide (H2O2) in acetonitrile solution, where L is a pentadentate polypyridine ligand. Formation of peroxo complexes is evidenced by low-temperature UV-visible spectroscopy, ESI-mass spectrometry, and EPR spectroscopy using parallel as well as perpendicular mode detection. The influence of the medium (basicity, water content) on the formation of various species is investigated. In basic nonanhydrous medium the fate of the reaction mixture solution is the formation of the di-mu-oxo mixed-valent Mn(III)Mn(IV) dinuclear complex. In acidic medium the building of the oxo bridges is avoided and the reaction mixture evolves toward oxidation of the ligand L. This reaction route offers new opportunities for the study of oxidation reactivity of Mn (hydro)peroxo complexes.     

A kinetic investigation of surfactant‐free emulsion polymerization of styrene using laponite clay platelets as stabilizers

We report the kinetics and mechanism of soap‐free emulsion polymerization of styrene using laponite platelets as stabilizers. The polymerization was initiated by potassium persulfate and the latex particles were stabilized by laponite platelets dispersed in water. Laponite adsorption on the polymer particles was enhanced by the addition of poly(ethylene glycol) monomethylether methacrylate (PEGMA). Particle nucleation can be described using the classical homogeneous nucleation mechanism followed by coagulation of unstable precursors. Oligomeric radicals formed in the water phase become insoluble and precipitate on the laponite surface leading to primary precursor particles composed of a few polymer chains and one or several clay platelets. Mature latex particles are then generated by coagulation and growth of the previously formed precursor particles. Both the nucleation and initial aggregation rates increased in the presence of PEGMA. Calorimetric monitoring of the polymerization allowed estimating the heat produced by the reaction and the monomer conversion. Hence, using the monomer material balance, the number of radicals in the polymer particles could be estimated precisely. The average number of radicals per particle, $ \bar n $ , was found to be high in the range 3–6. This result was attributed to strong attractive interactions between the growing radicals and the clay surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Sugar-derived tricatenar catanionic surfactant: self-assembly and aggregation behavior in the cationic-rich side of the system

The aggregation behavior of the cationic-rich side of a sugar-based tricatenar catanionic mixture was investigated in water, and it was shown that the excess of cationic sugar-based surfactant enhanced vesicle stability as well as encapsulation properties. Moreover, when the system was diluted, the vesicular solution collapsed into a lamellar phase, whereas, when it was concentrated, no major impact on the shape and stability of the aggregates was observed. We also showed that both an increase in temperature and the addition of salt induced reversible vesicle aggregation, which appeared to be salt-specific, following the direct order of the Hofmeister series. A proper adjustment of these parameters should then enable better control of the shape, stability, and even encapsulation ability of the aggregates formed by these tricatenar cationic/anionic mixtures.     

New ammonium surfactant-stabilized rhodium(0) colloidal suspensions: influence of novel counter-anions on physico-chemical and catalytic properties

Novel anionic species, such as hydrogen carbonate (HCO(3)(?)), fluoride (F(?)), triflate (CF(3)SO(3)(?)), tetrafluoroborate (BF(4)(?)) and chloride (Cl(?)) were investigated as new partners of water soluble N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl) ammonium salts, used as a protective agent of rhodium colloids. The effect of the surfactant polar head on the micellar behavior, size and morphology of the nanospecies was studied by adapted physico-chemical experiments (surface tension measurements, dynamic light scattering, thermogravimetric and TEM analyses) and discussed in terms of strong or weak stabilization of the growing nanoparticles surface. Finally, the influence of the nanoenvironment generated by the surfactant with various counter-anions was evaluated via the hydrogenation of aromatics.     

Geometric and electronic structures of peroxomanganese(III) complexes supported by pentadentate amino-pyridine and -imidazole ligands

Three peroxomanganese(III) complexes [Mn(III)(O(2))(mL(5)(2))](+), [Mn(III)(O(2))(imL(5)(2))](+), and [Mn(III)(O(2))(N4py)](+) supported by pentadentate ligands (mL(5)(2) = N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine, imL(5)(2) = N-methyl-N,N',N'-tris((1-methyl-4-imidazolyl)methyl)ethane-1,2-diamine, and N4py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine) were generated by treating Mn(II) precursors with H(2)O(2) or KO(2). Electronic absorption, magnetic circular dichroism (MCD), and variable-temperature, variable-field MCD data demonstrate that these complexes have very similar electronic transition energies and ground-state zero-field splitting parameters, indicative of nearly identical coordination geometries. Because of uncertainty in peroxo (side-on η(2) versus end-on η(1)) and ligand (pentadentate versus tetradentate) binding modes, density functional theory (DFT) computations were used to distinguish between three possible structures: pentadentate ligand binding with (i) a side-on peroxo and (ii) an end-on peroxo, and (iii) tetradentate ligand binding with a side-on peroxo. Regardless of the supporting ligand, isomers with a side-on peroxo and the supporting ligand bound in a tetradentate fashion were identified as most stable by >20 kcal/mol. Spectroscopic parameters computed by time-dependent (TD) DFT and multireference SORCI methods provided validation of these isomers on the basis of experimental data. Hexacoordination is thus strongly preferred for peroxomanganese(III) adducts, and dissociation of a pyridine (mL(5)(2) and N4py) or imidazole (imL(5)(2)) arm is thermodynamically favored. In contrast, DFT computations for models of [Fe(III)(O(2))(mL(5)(2))](+) demonstrate that pyridine dissociation is not favorable; instead a seven-coordinate ferric center is preferred. These different results are attributed to the electronic configurations of the metal centers (high spin d(5) and d(4) for Fe(III) and Mn(III), respectively), which results in population of a metal-peroxo σ-antibonding molecular orbital and, consequently, longer M-O(peroxo) bonds for peroxoiron(III) species.     

Noninvasive assessment of hepatic fibrosis in patients with chronic hepatitis C using serum Fourier transform infrared spectroscopy

Assessment of liver fibrosis is of paramount importance to guide the therapeutic strategy in patients with chronic hepatitis C (CHC). In this pilot study, we investigated the potential of serum Fourier transform infrared (FTIR) spectroscopy for differentiating CHC patients with extensive hepatic fibrosis from those without fibrosis. Twenty-three serum samples from CHC patients were selected according to the degree of hepatic fibrosis as evaluated by the FibroTest: 12 from patients with no hepatic fibrosis (F0) and 11 from patients with extensive fibrosis (F3–F4). The FTIR spectra (ten per sample) were acquired in the transmission mode and data homogeneity was tested by cluster analysis to exclude outliers. After selection of the most discriminant wavelengths using an ANOVA-based algorithm, the support vector machine (SVM) method was used as a supervised classification model to classify the spectra into two classes of hepatic fibrosis, F0 and F3–F4. Given the small number of samples, a leave-one-out cross-validation algorithm was used. When SVM was applied to all spectra (n = 230), the sensitivity and specificity of the classifier were 90.1% and 100%, respectively. When SVM was applied to the subset of 219 spectra, i.e., excluding the outliers, the sensitivity and specificity of the classifier were 95.2% and 100%, respectively. This pilot study strongly suggests that the serum from CHC patients exhibits infrared spectral characteristics, allowing patients with extensive fibrosis to be differentiated from those with no hepatic fibrosis.