Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

Evaluation of the immobilized artificial membrane phosphatidylcholine: Drug discovery column for high-performance liquid chromatographic screening of drug–membrane interactions

Chromatographic retention factors (k′) of a series of eight β-adrenoceptor antagonist compounds (β-adrenolytic drugs) were determined employing an immobilized artificial membrane column (IAM.PC.DD). The influence of mobile phase pH, ionic strength, and organic modifier composition was studied in order to examine column performance. After the IAM.PC.DD columns were exposed to approximately 7000 column volumes of a 0.01 M PBS mobile phase, five out of six columns tested showed significant peak broadening and decreased k′ values indicative of premature column failure. The data suggested that the immobilized phospholipids stationary phase was removed by the 0.01 M PBS mobile phase. The β-adrenolytic drug's log k′_IAM values obtained with an IAM.PC.DD column were compared to an ^esterIAM.PC.MG column for predicting drug membrane interactions. For the linear regression analysis between log k′_IAM and the logarithm of the n-octanol–water partition coefficients (r_IAM.PC.DD=0.8710 vs. r_IAM.PC.MG=0.9538), the C₁₈ HPLC retention factors (r_IAM.PC.DD=0.8408 vs. r_IAM.PC.MG=0.9380), the liposome partition coefficients (r_IAM.PC.DD=0.8887 vs. r_IAM.PC.MG=0.9187), and various pharmacokinetic parameters, significantly better correlations were obtained with the ^esterIAM.PC.MG column than the IAM.PC.DD column.     

A coated-platinum sulfate-selective electrode

Sulfate-selective electrodes can be fabricated from commercial platinum electrodes by coating them with a mixture of Aliquat-336 and trifluoroacetyl-p-butylbenzene in polyvinyl chloride matrix. Adding a solid, sparingly soluble sulfate such as that of strontium, lead, barium, or 2-aminoperimidine (2-AP) improves the selectivity for sulfate relative to nitrate. The 2-AP electrode shows the best physical stability and is described in detail. The order ofanion interference is ClO₄^->Cl^->NO₃^->H₂PO₄^->F^-. The useful pH range is 4–9. The response is Nernstian from 10^-5 to 10^-1 M in sodium sulfate solutions.     

Adhesive transfer of thin viscoelastic films

Micellar suspensions of acrylic diblock copolymers are excellent model materials for studying the adhesive transfer of viscoelastic solids. The micellar structure is maintained in films with a variety of thicknesses, giving films with a well-defined structure and viscoelastic character. Thin films were cast onto elastomeric silicone substrates from micellar suspensions in butanol, and the adhesive interactions between these coated elastomeric substrates and a rigid indenter were quantified. By controlling the adhesive properties of the film/indenter and film/substrate interfaces we were able to obtain very clean transfer of the film from the substrate to the portion of the glass indenter with which the film was in contact. Adhesive failure at the film/substrate interface occurs when the film/indenter interface is able to support an applied energy release rate that is sufficient to result in cavity nucleation at the film/substrate interface. Cavity formation is rapidly followed by delamination of the entire region under the indenter. The final stage in the transfer process involves the failure of the film that bridges the indenter and the elastomeric substrate. This film is remarkably robust and is extended to three times its original width prior to failure. Failure of this film occurs at the periphery of the indenter, giving a transferred film that conforms to the original contact area between the indenter and the coated substrate.     

Anion-controlled nuclearity in nickel complexes with potentially dinucleating, poly(oxime) amine ligands

Two new ligands consisting of bis(oxime) amine units tethered by a bridge have been synthesized. Their nickel chloride and nickel nitrate complexes have also been synthesized and characterized by X-ray crystallography, FTIR, mass spectrometry, and elemental analysis. One of these ligands, L1 (N,N,N',N'-tetra(1-propan-2-onyl oxime)-diamino-m-xylene), is always dinucleating, while the other ligand, L2 (N,N,N',N'-tetra(1-propan-2-onyl-oxime)-1,3-diaminopropane), shows an unusual anion dependence on the nuclearity. When nickel chloride is used, the ligand acts in a dinucleating manner and coordinates two nickels; however, when nickel nitrate is used, the ligand acts in a monodentate fashion and coordinates only one nickel. Once the mononuclear complex is formed, it is not possible to add a second nickel if Ni(NO(3))(2) is used as the nickel source; it is possible, however, to add a second nickel if NiCl(2) is used as the nickel source. The dinuclear complex can be converted to the mononuclear one by either using silver nitrate to exchange the chloride anions for nitrates or by dissolving the complex in water. Ni(2)(L1)Cl(4)(DMF)(2).DMF: orthorhombic, P2(1)2(1)2(1), a = 12.2524(11) A, b = 16.6145(15) A, c = 20.1234(19) A, V = 4096.5(6) A(3), Z = 4. [Ni(2)(L2)Cl(4)(DMF)](2).2DMF: triclinic, P-1, a = 12.5347(5) A, b = 12.5403(5) A, c = 14.3504(6) A, alpha = 67.348(1) degrees , beta = 69.705(1) degrees , gamma = 81.549(1) degrees , V = 1952.25(14) A(3), Z = 1. Ni(L2).(NO(3))(2): monoclinic, P2(1)/n, a = 9.6738(3) A, b = 30.2229(9) A, c = 15.8238(5) A, beta = 97.995(1) degrees , V = 4581.4(2) A(3), Z = 8.     

The reaction of epibromohydrin with hydroxyquinazolin-2-(1H)one derivatives. Novel oxazine formation

Epibromohydrin was found to react with 7-hydroxy-2-methylpyrrolo[1,2-c]quinazolin-5(6H)-one ( 4 ) in the presence of sodium hydroxide to form the novel oxazine 5 . The structure of compound 5 was proven by cmr and pmr analysis.     

MENTHOR,a database system for the storage and retrieval of three-dimensional molecular structures and associated data searchable by substructural,biologic, physical,or geometric properties

Summary MENTHOR is a database system for the storage and retrieval of three-dimensional coordinate and charge information on molecules as well as of traditional biological and physical properties. Our molecular graphics system retrieves from MENTHOR structural information in individual molecules and receptor map/macromolecular binding site hypotheses. Substructural searches of MENTHOR are used to find starting coordinates for molecular modeling and traditional database searches of MENTHOR identify compounds for which modeling is needed. It also forms the data to be searched with ALLADDIN, our substructure/geometric search program. MENTHOR expedites molecular modeling by organizing previous work and facilitating transmission of information between individuals. Examples from modeling of D-2 receptor agonists are shown.     

Photosensitization of nanocrystalline TiO2 by self-assembled layers of CdS quantum dots

CdS quantum dots can be self-assembled on high surface area nanocrystalline TiO2 electrodes; spectroscopic and photoelectrochemical studies indicate that the size, and hence the absorption edge, of the CdS particles can be controlled; efficient photosensitization of the TiO2 electrode by the Q-particles has been achieved.     

Remarkably facile solvolyses of triflates via carbocationic processes in dimethyl sulfoxide

A number of triflates have been shown to undergo clean pseudo-first-order solvolysis reactions in DMSO-d(6) to give products derived from carbocationic intermediates. Thus, t-BuCH(OTf)CO-t-Bu (5) and t-BuCH(2)OTf (9) react readily in DMSO-d(6) at 25 degrees C to give a rearranged oxosulfonium salts, and subsequent alkene products where methyl migration to the incipient cationic center occurs. t-BuCH(OTf)CO(2)CH(3) (14) gives analogous rearranged products, and 1-methylcyclopropyl triflate (21) gives a ring-opened allylic oxosulfonium salt. These triflates react primarily via k(Delta) pathways. 6-Methylbicyclo[3.1.0]hex-6-yl triflate (23), bicyclo[2.2.1hept-1-yl triflate (24), 1,6-methano[10]annulen-11-yl triflate (25), (CH(3))(2)C(OTf)CO(2)CH(3) (26), and (CH(3))(2)CCN(OTf) (29) all react in DMSO-d(6) to give carbocation-derived products. PhCH(OTf)CF(3) (33) and substituted analogues also react readily in DMSO-d(6), and the Hammett rho(+) value is -3.7. This suggests a "borderline" mechanism where the transition state has substantial charge development. The primary feature of these solvolyses is the high reactivity of all of these triflates in DMSO-d(6). Thus, these triflates are all more reactive in DMSO-d(6) than in HOAc, and for most, rates are faster than in CF(3)CH(2)OH. Triflates 5, 21, 29, and 33 are 10(8)-10(9) times more reactive in DMSO-d(6) than the corresponding mesylates. It is suggested that the decreased need for electrophilic solvation of triflate anion, and the high cation solvating ability of DMSO, are the reasons for the high triflate reactivity in DMSO-d(6).     

Stir bar sorptive extraction based on restricted access material for the direct extraction of caffeine and metabolites in biological fluids

A biocompatible stir bar sorptive extraction (SBSE) device was prepared using an alkyl-diol-silica (ADS) restricted access material (RAM) as the SBSE coating. The RAM-SBSE bar was able to simultaneously fractionate the protein component from a biological sample, while directly extracting caffeine and its metabolites, overcoming the present disadvantages of direct sampling in biological matrices by SBSE, such as fouling of the extraction coating by proteins. Desorption of the analytes was performed by stirring the bar in a water/ACN mixture (3/1, v/v) and subsequently reconcentrating the sample solution in water to enable HPLC-UV analysis to be performed. The limit of detection, based on a signal to noise ratio of 3, for caffeine was 25 ng/mL in plasma. The method was confirmed to be linear over the range of 0.5-100 microg/mL of caffeine with an average linear coefficient (R2) value of 0.9981. The injection repeatability and intra-assay precision of the method were evaluated over ten injections, resulting in a %RSD of approximately 8%. The RAM-SBSE device was robust (>50 extraction in plasma without significant signal loss) and simple to use, providing many direct extractions and subsequent determination of caffeine and its metabolites in biological fluids. In contrast to existing sample preparation methods for the analysis of caffeine and selected metabolites in biological fluids, this feasibility study using a biocompatible SBSE approach was advantageous in terms of simplifying the sample preparation procedures.