Oxygen equilibrium pressure as a measure of oxygen binding energy in the V2O5−x system

Using the redox mechanism of vanadia catalyst action as a starting point, oxygen binding energy and its measurement have been discussed. Experimental results on the equilibrium oxygen pressure are presented and two types of equilibrium are distinguished: chemisorbed and redox. It has been shown that univariant redox equilibrium is appropriate for characterizing vanadia catalysts.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Changes in surface composition of Fe-Si-Cr-K oxide alkylation catalyst: the marked role of potassium ferrites

The influence of gas-phase methylation of phenol on the state of the Fe-Si-Cr-K oxide catalyst surface was investigated by thermodesorption of K atoms and ions. Changes in potassium desorption energies, as determined from Arrhenius-like plots, varied from 3.07 eV to 1.21 eV for the atoms and from 2.59 eV to 2.89 eV for ion desorption from the active and deactivated samples, respectively. The results were discussed in terms of transformation of the catalyst surface and formation of β-ferrite.     

Phlogophites intercalated with Al2O3 pillars and modified with transition metals as catalysts of the DeNOx process

Natural phlogophite, pre-treated with acids and intercalated with alumina pillars, was used as catalytic support. Transition metals (Fe, Cu) were deposited on the surface of the modified clay materials by an ion-exchange method. The obtained samples were characterized with respect to structure (XRD), texture (BET), composition (EPMA) and chemical nature of the deposited transition metals species (UV-vis-DRS). The phlogophite based materials have been found to be active and selective catalysts of the DeNOx process. The Fe-containing samples were catalytically active at lower temperatures than the clays modified with copper. A competitive ammonia oxidation by oxygen decreased the effectiveness of the DeNOx process in the high temperature range.     

New Carbonyl Compounds in the High-Boiling Fraction of Lavender Oil. 3rd Communication

The occurrence of a series of new constituents which can be considered as Diels-Alder adducts of methyl vinyl ketone and ocimene (→1–4), myrcene (→ 9 , 10 ) or β-far-nesene ( → 11 , 12 ), respectively, was reported. Furthermore, the structures of four isomeric cyclohexene derivatives could be established as adducts 21–24 of (E, Z)- and (E, E)-1,3,5-undecatrience and methyl vinyl ketone. Another series of constituents having the norbornane skeleton represents adducts 25–32 , and 33–40 of methyl cyclopentadiene and 1-octen-3-one or methyl vinyl ketone, respectively. In accordance with Alder's endo-rule the endo-isomers are preponderant in the natural as well as in the synthetic mixtures. Most of these constituents could also be identified in a lavender absolute as well as in a freshly prepared hexane extract of lavender flowers (Lavandula officinalis CHAIX ).     

AES and ELS study of titanium oxidation in high vacuum

In the present work, results of the interaction of O₂ with polycrystalline titanium using AES, and ELS techniques, are presented. Changes in the shapes of Ti(LMV) and Ti(LMM) transitions and in the Ti(LM)O(V)/Ti(LMV) and Ti(LMV) Ti(LMM) amplitude ratios as well as a shift of the 34 eV loss peak [Ti(3p level], are studied as function of the oxygen exposure.At O₂ pressures equal or less than 10^–6 Pa and exposure up to 2000 L(O₂) (weak oxidation), the Ti(LM)O(V)/Ti(LMV) and Ti(LMV)/Ti(LMM) ratios show three clearly distinct regions: (i) up to 20L there is a chemisorbed phase with the Ti(LMV)/Ti(LMM) ratio remaining constant and a fast linear increase in the Ti(LM)O(V)/Ti(LMM) ratio. (ii) At exposures higher than 20L the oxidation begins being characterized by a linear variation of the Ti(LM)O(V)/Ti(LMV) and Ti(LMV)/Ti(LMV) ratios, with positive and negative slopes, respectively. (iii) At 125L there is a change in both slopes but no stable value is achieved, despite the O(KLL)/Ti(LMM) ratio remains constant. Hence, it can be concluded that TiO is the final oxide obtained after that treatment, from features like the shape of the transitions and a maximum shift of 3eV of the Ti(3p) level, complemented with ESD experiments.On the other hand, experiments at pressures higher than 10^–4Pa with or without the surfaces at 900K (strong oxidation) indicate that the most likely final oxide is TiO₂.Work presented to the IXIVC-VICSS. Madrid (1983)     

Synthesis and rearrangement of 4-imino-4H-3,1-benzoxazines

Summary N-Acylanthranilamides react with dibromotriphenylphosphorane in the presence of triethylamine as HBr captor to give 4-imino-4H-3,1-benzoxazines in good yields. If the reaction is carried out without acid acceptor, N-acetylanthranilamides yield 2-methyl-4-quinazolones, whereas N-benzoylanthranilamides give 2-phenyl-4-imino-4H-3,1-benzoxazines. It has also been found that 2-methyl-4-imino-4H-3,1-benzoxazines rearrange under the influence of HCl or HBr into the respective 2-methyl-4-quinazolones; 2-phenyl-4-imino-4H-3,1-benzoxazines, however, do not undergo such a rearrangement.

---

Synthese und Umlagerung von 4-Imino-4H-3,1-benzoxazinen

Zusammenfassung Die Umsetzung von N-Acyl-anthranilsäure-amiden mit Triphenyldibromphosphoran in Gegenwart von Triethylamin als HBr-Akzeptor führt mit guten Ausbeuten zu 4-Imino-4H-3,1-benzoxazinen. Wird die Reaktion ohne säurebindendes Mittel durchgeführt, dann entstehen aus N-Acetyl-anthranilsäure-amiden 2-Methylchinazolone-4, jedoch erhält man aus N-Benzoylanthranilsäure-amiden 2-Phenyl-4-imino-4H-3,1-benzoxazine. 2-Methyl-4-imino-4H-3,1-benzoxazine erleiden unter dem Einfluß von HBr oder HCl eine Umlagerung in entsprechende 2-Methylchinazolone-4, während 2-Phenyl-4-imino-4H-3,1-benzoxazine zu einer solchen Umlagerung nicht befähigt sind.

     

The state of conservation of painted surfaces in the presence of accelerated ageing processes monitored by use of FT-Raman spectroscopy and multivariate control charts

A new method has been developed for monitoring the degradation of paintings. Two inorganic pigments (ultramarine blue and red ochre) were blended with linseed oil and spread on canvas. Each canvas was subjected to simulated accelerated ageing in the presence of typical degradation agents (UV radiation and acidic solution). Periodically the painted surfaces were analysed by FT-Raman, to investigate the status of the surface. The data obtained were analysed by principal component analysis (PCA). Finally the Shewhart and cumulative sum control charts based on the relevant principal components (PC) and the so called scores monitoring and residuals tracking (SMART) charts were built. The method based on the use of PC to describe the process was found to enable identification of the presence of relevant modification occurring on the surface of the samples studied.Electronic supplementary material Supplementary material is available for this article at     

Selenium speciation by coupling vesicle mediated HPLC with off-line ETAAS and on-line focused microwave digestion HG-AAS detection

A novel High Performance Liquid Chromatography (HPLC) method for the separation of selenium species with specific detection by off-line Electrothermal Atomization Atomic Absorption Spectrometry (ETAAS) or on-line focused microwave digestion (MW) Hydride Generation Atomic Absorption Spectrometry (HG-AAS) is described. Vesicular mobile phases of the cationic surfactant didodecyldimethylammonium bromide (DDAB) have been evaluated for the liquid chromatographic separation of inorganic selenium (selenite and selenate) and different selenoaminoacids (selenocystine, selenomethionine and selenoethionine) on a C(18) reversed-phase column modified by DDAB molecules. The effects of different parameters (pH, buffer and vesicle concentrations) of the mobile phase on the retention times have been determined. The detection limit for selenium with the proposed off-line HPLC-ETAAS method has been found to be 5 microg/L of Se. The detection limit using HPLC-"on line" focused microwave digestion-HG-AAS has been found to be 1 microg/L of Se, with a precision (repeatability) better than +/- 5%. The latter proved to be an exceptional on-line real-time chromatographic detector for selenium speciation purposes.     

Surface plasmon resonance biosensor for genetically modified organisms detection

The development of a surface plasmon resonance (SPR) affinity biosensor based on DNA hybridisation is described. This biosensor has been applied to genetically modified organisms (GMOs) detection. Single stranded DNA (ssDNA) probes were immobilised on the sensor chip of an SPR device and the hybridisation between the immobilised probe and the complementary sequence (target) was monitored. The probe sequences were internal to the sequence of 35S promoter and NOS terminator which are inserted sequences in the genome of GMO regulating the transgene expression. The system has been optimised using synthetic oligonucleotides, then applied to real samples analysis. Samples, containing the transgenic target sequences, were amplified by polymerase chain reaction (PCR) and then detected with the SPR biosensor.