Photografting as a versatile,localizable, and single‐step surface functionalization of silica‐based monoliths dedicated to microscale separation techniques

In this work, we developed a surface functionalization way of silica monoliths with a rapid, simple, versatile, and localizable photografting step. The elaboration of a photoreactive layer at the surface of monoliths was first optimized. The functionalization with [γ‐(methacryloyloxy)propyl]trimethoxysilane at 80°C in a hydro‐organic solution containing triethylamine as catalyst allows reachng the highest density of methacrylate photoactive moieties on silica surfaces. These methacrylate reactive surfaces were subsequently photografted within few minutes with acrylate monomers bearing alkyl chains (C₁₂ and C₁₈). The photografting efficiency was determined by monitoring the retentive properties of monoliths in the RP mode. The retention factors are of the same order of magnitude as highly retentive columns obtained by modification of silica surface with long‐alkyl chain silanes or by thermal polymerization of long‐alkyl chain monomers. It was also verified that such grafting neither impaired the efficiency of the monolithic stationary phase (H_min = 6–8 μm in nano‐LC) nor its permeability (about 6 × 10^?14 m²). Further, it was also demonstrated that photografting is localizable in nonmasked defined areas. Results obtained in anion‐exchange chromatography after photopolymerization of [2‐(methacryloyloxy)ethyl]trimethylammonium chloride are presented as well to demonstrate the versatility of the developed approach.     

A TLC Study of the lipophilicity of thirty-two acetylcholinesterase inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives

The lipophilicity of thirty-two novel acetylcholinesterase (AChE) inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives was studied by thin layer chromatography. The analyzed compounds were chromatographed on RP-18, RP-8, RP-2, CN and NH₂ stationary phases with dioxane — citric buffer pH 3.0 binary mobile phases containing different proportions of dioxane. R_M values for pure water were extrapolated from the linear Soczewiński-Wachtmeister equation and six compounds with known literature log P values were used as reference calibration data set for computation of experimental log P values. The obtained results were compared with computationally calculated partition coefficients values (AlogPs, AClogP, AlogP, MlogP, KOWWIN, XlogP2, XlogP3) by PCA and significant differences between them were observed.     

Evaluation of a platinum electrode modified with hydroxyapatite in the lead(II) determination in a square wave voltammetric procedure

The behavior of a modified carbon platinum electrode (Pt) for lead(II) determination by square wave voltammetry (SWV) was studied. The modified electrode is obtained by electrodeposition of hydroxyapatite (HAP) on the surface of a bare platinum electrode. The new electrode (HAP/Pt) revealed interesting electroanalytical detection of lead(II) based on the adsorption of this metal onto hydroxyapatite under open circuit conditions. After optimization of the experimental and voltammetric conditions, the best voltammetric responses-current intensity and voltammetric profile were obtained in 0.2 mol L^?1 KNO₃ with: 30 min accumulation time, 5 mV pulse amplitude and 1 mV s^?1 scan rate. The observed detection (DL, 3σ) and quantification (DL, 10σ) limits in pure water were 2.01 × 10^?8 and 6.7 × 10^?7 mol L^?1, respectively. The reproducibility of the proposed method was determined from five different measurements in a solution containing 2.2 × 10^?6 mol L^?1 lead(II) with a coefficients of variation of 2.08%.The electrochemical of hydroxyapatite at platinum surfaces was characterized, after calcinations 900 °C, by X-ray diffraction, infrared spectroscopy, chemical and electrochemical analysis.     

Evaluation of Antimicrobial Activity of Some Newly Synthesized 4‐Thiazolidinones

The antimicrobial activity of thirteen newly synthesized 4‐thiazolidinones (TZONs) and four dithiolane derivatives was assessed against susceptible and resistant bacteria, including MRSA, as well as Candida albicans. The structure‐activity relationships revealed that 4‐Thiazolidinone derivatives harboring p‐chlorophenyl and dicarboxyethyl at the 2‐ethenyl and 5‐arylidine positions of the thiazolidinone ring display considerable antibacterial properties. No antifungal activity was recorded by all tested compounds against Candida albicans. The possible potentiative (synergistic) effect of the most active compounds to a few commercial antibiotics was also investigated.     

Evaluation of Antifungal and Antioxidant Activity of Newly Synthesized 4‐Thiazolidinones

The antifungal and antioxidant activities of thirty newly synthesized 4‐thiazolidinone (TZON) derivatives were assessed against some fungal species including Candida albicans and Aspergillus niger. The introduction of different arylidene moieties at 5‐positions of the thiazolidinone ring successfully enhanced its biological activity. The structure–activity relationships revealed that 4‐thiazolidinone derivatives harboring dicarboxyethyl (at the 2‐ethenyl) and p‐nitrophenylhydrazyl arm (at the 5‐arylidine positions of the thiazolidinone ring) display considerable antifungal and antioxidant properties.     

Micro-TLC Approach for Fast Screening of Environmental Samples Derived from Surface and Sewage Waters

In this work we demonstrated analytical capability of micro-planar (micro-TLC) technique comprising one and two-dimensional (2D) separation modes to generate fingerprints of environmental samples originated from sewage and ecosystems waters. We showed that elaborated separation and detection protocols are complementary to previously invented HPLC method based on temperature-dependent inclusion chromatography and UV-DAD detection. Presented 1D and 2D micro-TLC chromatograms of SPE (solid-phase extraction) extracts were optimized for fast and low-cost screening of water samples collected from lakes and rivers located in the area of Middle Pomerania in northern part of Poland. Moreover, we studied highly organic compounds loaded in the treated and untreated sewage waters obtained from municipal wastewater treatment plant “Jamno” near Koszalin City (Poland). Analyzed environmental samples contained number of substances characterized by polarity range from estetrol to progesterone as well as chlorophyll-related dyes previously isolated and pre-purified by simple SPE protocol involving C18 cartridges. Optimization of micro-TLC separation and quantification protocols of such samples were discussed from the practical point of view using simple separation efficiency criteria including total peaks number, log(product ΔhR _F), signal intensity and peak asymmetry. Outcomes of the presented analytical approach, especially using detection involving direct fluorescence (UV366/Vis) and phosphomolybdic acid (PMA) visualization are compared with UV-DAD HPLC-generated data reported previously. Chemometric investigation based on principal components analysis revealed that SPE extracts separated by micro-TLC and detected under fluorescence and PMA visualization modes can be used for robust sample fingerprinting even after long-term storage of the extracts (up to 4 years) at subambient temperature (?20 °C). Such approach allows characterization of wide range of sample components that are present in given extract in high and middle concentration range. Due to protocol simplicity and low cost of analysis this method can be useful for preliminary sample screening.     

Studies on Pyrrolidinones. An Improved One Pot Synthesis of 1,2,3,5,10,10a-Hexahydrobenz[f]indolizine-3,10-dione

Starting from the readily available N,O-bis trimethylsilyl pyroglutamate, an easy high yield one pot synthesis of ketone 1 was described.     

Facile Synthesis of New Spirothiadiazolopyridazines by 1,3‐Dipolar Cycloaddition

New derivatives of the spiro type of pyridazines have been synthesized by 1,3‐dipolar cycloaddition of N‐aryl‐C‐ethoxycarbonylnitrile imines with pyridazin‐3(2H)‐thiones. When the nitrile oxide was used, the corresponding pyridazin‐3(2H)‐one was obtained from the intermediate spirooxathiazole by elimination of isothiocyanate group. The peri‐ and regioselectivity of the reaction were ascertained by X‐ray analysis and ¹³C NMR spectroscopy of the cycloadducts 3–9.     

Synthesis and Reaction of Some Indenopyridine and Thieno[2,3-b]Indeno[2,1-e]Pyridine Derivatives

Synthesis of indenopyridine-2-thione derivatives 6a-e via reaction of compound 1 with thioamides 2a-e in good yields. Several thieno[2,3-b]indeno[2,1-e]pyridine 9a-e have been synthesized. Some of them was used as a key intermediate in synthesis of 10-12. On the other hand, compound 1 reacted with various reagents to yield 16, 19, 21-24.     

Stereoselective Synthesis of Some Dialkyl (E)-2-Bromomethylene Glutarates

Reaction of 2-bromo-2-bromomethyl glutaric acid esters with tetraalkylammonium fluoride in HMPA, conveniently provides the corresponding dialkyl (E)-2-bromomethylene derivatives in good yields.