Resistance of zinc thermal sprayed coatings on different corrosive environments

Zinc coatings on ferrous substrates are possible to be applied with thermal spraying. In the present work the corrosion behavior of zinc thermal sprayed coatings deposited on low carbon steel St-37 was examined in a simulated marine atmosphere (salt spray chamber-SSC) and in a dry atmosphere at elevated temperature (400°C). The corrosion progress was examined by means of optical microscopy, scanning electron microscopy, X-ray diffraction and thermogravimetric analysis. From this investigation it was deduced that in the SSC the coating is uniformly corroded, while the main corrosion products are hydrated zinc oxides and chlorides. By contrast at 400°C only a thin, compact and continuous film of ZnO is formed on top of the coating, which remains adherent to the ferrous substrate.     

Efficient desulfurization of 2-thiopyrimidine nucleosides to the corresponding 4-pyrimidinone analogues using trans-2-(phenylsulfonyl)-3-phenyloxaziridine

A brief treatment of 2-thiopyrimidine nucleosides (s²U^∗) with trans-2-phenylsulfonyl-3-phenyloxaziridine (PSO) results in efficient substrate desulfurization leading to the corresponding 4-pyrimidinone analogues (H²U^∗). The key transformation proceeds through oxidation of the 2-thiocarbonyl group to a sulfur oxyacid derivative and subsequent elimination of sulfur dioxide. 4-Pyrimidinone 1-β-d-riboside (H²U) has been transformed into the respective phosphoramidite, a ready-to-use monomer for the introduction of a modified nucleoside into an oligonucleotide chain. Moreover, the effective desulfurization of the 2-thiouridine nucleotide could be achieved directly at the oligonucleotide level, by treatment of the TdA(s²U)dGdC oligonucleotide with PSO, as verified by MALDI-TOF mass spectrometry.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

On distributions of antibaryons in\bar p-Nucleus inelastic collisions

In the framework of the dual parton model we calculate the spectra of secondary antibaryons in \(\bar p\) -nucleus non-annihilation inelastic interactions. We find that the number of antibaryons in the backward hemisphere in the \(\bar p\) -nucleon centre-of-mass frame can grow with the atomic number of the nucleus.     

Lithium diorganocuprate reactions with l-serine derivatives

The lithium diorganocuprate reactions with L-serine derivatives are studied. Retention of configuration, or at least a high enantiomeric excess (>80%) of the formed α-amino esters is observed in all cases. Attempts are made to restrict side-reactions.     

Comparison of 14 MeV-NAA, k0-NAA and ED-XRF for air pollution bio-monitoring

In this paper the performances and the limitations of three multi-elementary analysis techniques are compared applied to a study of air pollution biomonitoring in Morocco. These techniques are: (1) 14 MeV neutron activation analysis (14 MeV-NAA), (2) thermal neutron activation analysis using the k ₀ quasi-absolute method (k ₀-NAA) and (3) energy dispersive X-ray fluorescence analysis (ED-XRF). The experimental procedures and the control of the analytical results using certified reference materials are described and discussed. The three methods were confronted for the analysis of lichens, mosses and tree-barks. The complementarity of these methods enabled us to determine 43 elements in different samples. The most suitable method for each element was selected according to the sensitivity and selectivity necessitating the minimum corrections of the matrix effects and/or the interfering reactions.     

13C NMR of indazoles

The carbon-13 chemical shifts and some selected coupling constants of 183 indazoles are reported. The main conclusions of the original references are briefly summarized.Published in Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1159–1179, September, 1995.     

Electron scattering on C6F6 and SF6 molecules

Total absolute cross sections for electron scattering on hexafluorobenzene, C₆F₆, and sulfur hexafluoride, SF₆, molecules, have been measured as a function of impact energy from 0.6 to 250 eV. The total cross section for C₆F₆ exhibits a very broad peak stretching from 10 to 100 eV with some weak features near 9.5 and 15 eV superimposed on the peak. Apart from the well-known low-energy resonant structures in the SF6 total cross section function, a new weak resonant feature close to 25 eV has been noticed in the present experiment, in accordance with earlier theoretical calculations.