Determination of traces of molybdenum in sea water by combined anion-exchange — graphite furnace atomic absorption spectrometry

Summary Traces of molybdenum in sea water have been preconcentrated by anion-exchange from acidified samples in the presence of sodium azide. Molybdenum adsorbs strongly on a column of Bio-Rad AG 1 (Cl^–) and can be stripped easily by elution with 2 mol/l NH₄Cl — 2 mol/l NH₄OH solution. Molybdenum in the effluent is determined by graphite furnace atomic absorption spectrometry. The combined method allows to determine traces of molybdenum in sea water as well as non-saline water on a 100 ml sample basis. The method gives a relative standard deviation of better than 8% at a molybdenum level of 10 g 1^–1 of sea water.

---

Bestimmung von Molybdänspuren in Meereswasser mit Hilfe einer Kombination von Anionenaustausch und elektrothermischer Atomabsorptionsspektrometrie

     

Studies of the polymerization of diallyl compounds. XXVII. Copolymerization of diallyl tartrate with several vinyl monomers

The radical copolymerization of diallyl tartrate (DATa) (M₁) with diallyl succinate (DASu), diallyl phthalate (DAP), allyl benzoate (ABz), vinyl acetate (VAc), or styrene (St) was investigated in order to disclose in more detail the characteristic hydroxyl group's effect observed in the homopolymerization of DATa. In the copolymerization with DASu or DAP as a typical diallyldicarboxylate, the dependence of the rate of copolymerization on monomer composition was different for different copolymerization systems and unusual values larger than unity for the product of monomer reactivity ratios, r₁r₂, were obtained. In the copolymerization with ABz or VAc (M₂), the r₁ and r₂ values were estimated to be 1.50 and 0.64 for the DATa/ABz system and 0.76 and 2.34 for the DATa/VAc system, respectively; the product r₁r₂ for the latter copolymerization system was found again to be larger than unity. In the copolymerization with St, the largest effect due to DATa monomer of high polarity was observed. Solvent effects were tentatively examined to improve the copolymerizability of DATa. These results are discussed in terms of hydrogen-bonding ability of DATa.     

Third-order nonlinear optical properties of azo dye attached polymers

Third-order nonlinear optical properties of a disazo dye attached polymer (3R) were evaluated and compared with that of a monoazo (Disperse Red 1) dye attached polymer (2R). The third-order nonlinear optical coefficient (ξ⁽³⁾) of the 3R is more than three times higher than that of the 2R over the fundamental wavelengths between 1.5 and 2.0 μm. This is explained by π-conjugation elongation. For both polymers, the ξ⁽³⁾ dependence on the fundamental wavelength corresponds to their absorption spectra. This is attributable to a three-photon resonance effect. At the 1.50 μm resonant wavelength, the maximum ξ⁽³⁾ of 4.8 × 10^-11 esu is obtained for 3R at a dye content of 17 mol%.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Application of non-thermal atmospheric pressure ac plasmas to the carbon dioxide reforming of methane

Methane conversions of 11.9%, yields of hydrogen as high as 23.3% and energy yields of 1.0 mol H₂/kWh have been achieved from CO₂ reforming of CH₄ in non-thermal, atmospheric pressure plasma reactors with Pt coated electrodes. Two reactors have been studied. A novel fan type reactor consisting of a movable rotor and immobile stator produced the highest yields in contrast to a tube type (silent discharge) reactor with a glass dielectric barrier. Conversions, yields of hydrogen and energy yields (expressed as mol H₂/kWh) were studied for CO₂/CH₄ concentrations of 1.1% and 5.0% in He as a function of flow rate and input voltage. Hydrogen yields are observed to increase as the input voltage is increased from 411 V to 911 V and the flow rate is decreased from 100 cc/min to 30 cc/min. Energy yields vary only slightly with input voltage and flow rate. Hydrogen yields show little dependence on CO₂/CH₄ concentrations, but energy yields are approximately five times greater for the 5.0% mixture than the 1.1% mixture. Selectivities to H₂, CO, coke, and low molecular weight hydrocarbons were also evaluated and compared to data obtained without CO₂ in the feed. Hydrogen selectivities of nearly 100% were obtained, with small amounts of ethane and propane as the only observed side products and the selectivites were approximately the same whether CO₂ was present or absent in the mixture. However, the reaction proceeds much more cleanly when CO₂ is present, producing CO. The syngas product has an H₂ : CO ratio of 1.5 with the fan type reactor and 0.67 with the tubular reactor. In the absence of CO₂, coke is the main carbonaceous product. Under all conditions studied the fan type reactor demonstrated higher methane conversions (up to 11.9%) and selectivities to hydrogen.     

Negative ion mass spectra of chlorine-containing molecules

The negative ion mass spectra of chlorine-containing molecules have been measured using a double focusing mass spectrometer with a photographic plate detector. The formulae of the negative ions not previously assigned using an electron multiplier detector have now been assigned.     

Determination of sodium azide in beverages by ion chromatography

A convenient method for determination of sodium azide in beverages using ion chromatography is described. This method combines the specificity for azide with a simple sample preparation using a bubble and trap apparatus that removes any interferences. Sodium azide in a sample was acidified, and the azide was converted to the volatile hydrazoic acid, which was trapped in 2.5 mM sodium hydroxide solution. Determination was performed by isocratic ion chromatography using suppressed conductivity detection. Calibration curves were linear for 0.5 to 20 microg/mL sodium azide and the detection limit was 0.05 microg/mL. Recoveries of sodium azide from spiked samples (10.0 microg/g) were more than 82.6%. The method was then used to analyze various beverages.     

Tandem base-promoted ring-opening/Brook rearrangement/allylic alkylation of O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehyde: scope and mechanism

Metalated O-silyl cyanohydrins of beta-silyl-alpha,beta-epoxyaldehyde have been found to serve as functionalized homoenolate equivalents by a tandem sequence involving base-promoted ring opening of the epoxide, Brook rearrangement, and alkylation of the resulting allylic anion. On the basis of mechanistic studies involving competitive experiments using the diastereomeric cyanohydrins, we propose a reaction pathway involving a silicate intermediate 36 formed by a concerted process via an anti-opening of the epoxide followed by the formation of an O-Si bond.     

Studies of the polymerization of diallyl compounds. XXVI. Enhanced polymerizability by the hydroxyl group in the polymerization of diallyl hydroxydicarboxylates

In order to elucidate the effect of the hydroxyl group on the polymerization of diallyl hydroxydicarboxylates, we investigated in detail the radical polymerizations of diallyl succinate (DASu), diallyl malate (DAMa), and diallyl tartrate (DATa), each of which have similar structure differing only in the number of hydroxyl groups present. The rate of polymerization (R_p) was quite enhanced in the order DASu < DAMa < DATa, in accord with the increase in the number of hydroxyl groups within a monomer unit. The enhanced ability of the allylic monomer radical to reinitiate chain growth was also in the same order, as was clear from the dependence of R_p on the initiator concentration. The dependence of the residual unsaturation of the polymer on the monomer concentration in the polymerizations of DAMa and DATa was abnormal in terms of cyclopolymerization. These results are discussed in connection with the formation of the intermolecular hydrogen bond through the hydroxyl groups.     

Novel long-chain anteiso-alkanes and anteiso-alkanoic acids in Antarctic rocks colonized by living and fossil cryptoendolithic microorganisms

Saponified extracts of rock samples colonized by cryptoendolithic microbial communities from the McMurdo Dry Valleys of Southern Victoria Land, Antarctica, were separated into hydrocarbon and fatty acid fractions by silica gel column chromatography. Hydrocarbons and methyl esters of fatty acids were analyzed by capillary gas chromatography-mass spectrometry. Unusually, a suite of long-chain anteiso-alkanes (a-C20 to a-C30) and anteiso-alkanoic acids (a-C20 to a-C30) were detected in many samples, together with straight-chain, branched and/or cyclic and acyclic isoprenoid compounds. These novel compounds are probably derived from unidentified heterotrophic bacteria or symbiotic processes in a unique microbial community in the Antarctic cold desert and suggest the occurrence of a special biosynthetic pathway. Long-chain anteiso-alkanes are probably formed through microbial decarboxylation of corresponding anteiso-alkanoic acids. They may serve as new biomarkers in environmental and geochemical studies.