Theoretical modeling of water vapor transport in cellulose-based materials

The theory of mass transport in porous media is of fundamental importance for different applications such as food, paper packaging, textiles, and wood for building materials. In this study, a theoretical water vapor transport model has been developed for cellulose-based materials, such as paper and regenerated cellulose film. Pore diffusivities were determined from the dynamic moisture breakthrough experiments comprising a stack of paper sheets and regenerated cellulose films in a configuration similar to a packed adsorption column. Other mass transfer parameters were determined from transient moisture uptake rate measurements. The model incorporates pore and surface diffusion as a lump parameter into a variable effective diffusion coefficient. The mass transport, involving both pore and surface diffusions, is evaluated independently. The theoretical water vapor transmission rates (WVTRs) obtained from the model were compared with experimentally determined WVTRs measured under steady-state conditions. The theoretical model, based on intrinsic diffusion, stipulates higher WVTR values compared to the experimental results. However, the theoretical water vapor transfer rates agree well with the experimental results when external mass transfer resistance is incorporated in the model.     

Studies on the constituents of Broussonetia species VIII. Four new pyrrolidine alkaloids, broussonetines R, S, T, and V and a new pyrroline alkaloid, broussonetine U, from Broussonetia kazinoki Sieb

Four new pyrrolidine alkaloids, broussonetines R, S, T, and V and a new pyrroline alkaloid, broussonetine U were isolated from the branches of Broussonetia kazinoki SIEB. (Moraceae) in low yield. Broussonetines R, S and T were formulated as (2R,3R,4R,5R)-2-hydroxymethyl-3,4-dihydroxy-5-[(1R)-1-hydroxy-3-[6-(4-hydroxybutyl)-cyclohexy-2-on-1(6)-enyllpropyl] pyrrolidine (1), (2R,3R,4R,5R)-2-hydroxymethyl-3,4-dihydroxy-5-[(1R,10S)-1,10,13-trihydroxytridecyl] pyrrolidine (2), (2R,3R,4R,5R)-2-hydroxymethyl-3,4-dihydroxy-5-[(1R,5S)-1,5, 13-trihydroxy-10-oxo-tridecyl] pyrrolidine (3). And broussonetines U and V were proposed to be (2S,3S,4S)-2-hydroxymethyl-3, 4-dihydroxy-5-(9-oxo-13-hydroxytridecyl)-5-pyrroline (4), (2R,3S,4R,5R)-2-hydroxymethyl-3,4-dihydroxy-5-[(E)-9-oxo-13-hydroxy-3-tridecenyl] pyrrolidine (5), respectively, by spectroscopic and chemical methods.     

Electronic structure and reactivity of Mg+(H2O)n cluster ions

Electronically excited states of magnesium-water cluster ions, Mg⁺(H₂O) _n ,n=1–5, are studied by photodissociation after mass selection. The observed photodissociation spectra are assigned to the²P–²S type transitions localized on the Mg⁺ ion with the aid of ab initio CI calculations. In addition to evaporation of water molecules, photoinduced intracluster reaction to produce MgOH⁺(H₂O) _n is found to occur efficiently, with pronounced size dependence. The intriguing features observed in the mass spectrum of nascent cluster ions are discussed in relation to the stepwise solvation of this reaction.     

Adsorption of C7 hydrocarbons on biporous SBA-15 mesoporous silica

In our recent studies (Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Langmuir 2005, 21, 2051-2057; Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Stud. Surf. Sci. Catal. 2005, in press), a series of synthesized SBA-15 materials were characterized using nitrogen adsorption/desorption isotherms at 77 K and SEM images. In the present paper, four of them (MMS-1-RT, MMS-1-60, MMS-1-80, and MMS-5-80) were further investigated with regard to their equilibrium characteristics using n-heptane and toluene as sorbates by the standard gravimetric technique. SBA-15 materials proved to have a broad pore size distribution within the micropore/small-mesopore range in the walls of their main mesoporous channels. The adsorption capacities for toluene were found to be higher than for n-heptane. The isosteric heats of adsorption, estimated by the Clausius-Clapeyron equation, are also higher for toluene compared to n-heptane. They were found to depend on framework microporosity of the relevant SBA-15 samples. The isosteric heats of adsorption for all sorbates decrease with increased loading and approach the heats of evaporation of the respective sorbate. The adsorption capacities of SBA-15 samples are significantly higher than those of silicalite, i.e., the MFI zeolite silica analogue. In contrast to that, the isosteric heats of adsorption in the mesopore channels of SBA-15 were found to be much smaller. This result also suggests that SBA-15 can potentially be a good candidate for separation of C(7) hydrocarbons.     

Carboxylic acids as promoters for internucleotide-bond formation via condensation of a nucleoside phosphoramidite and a nucleoside: relationship between the acidity and the activity of the promoter

The relationship between the activity and the acidity of a carboxylic acid as a promoter for condensation of a nucleoside phosphoramidite and a nucleoside was investigated. The investigation revealed that the acid, the pKa value of which in acetonitrile is less than 18, is capable of promoting the condensation reaction, and acid with a pKa value outside of this range does not serve as a promoter. In carboxylic acids serving as promoters, the ones with higher acidity generally show greater activity. In particular, acids with a pKa value less than ca. 16 (measured by a potentiometric method), such as trichloroacetic acid (pKa=10.6), trifluoroacetic acid (pKa=12.7), dichloroacetic acid (pKa=13.2 or 15.8), and 2,4-dinitrobenzoic acid (pKa=16.1), show high levels of activity higher than that of conventionally used 1H-tetrazole. These carboxylic acids generally serve as excellent promoters for both the liquid-phase and the solid-phase synthesis of oligonucleotides via phosphoramidite method.     

Synthesis and platelet aggregation inhibitory activity of diphenylazole derivatives. I. Thiazole and imidazole derivatives

Diphenylimidazole and diphenylthiazole derivatives were synthesized and tested as inhibitors of platelet aggregation in in vitro experiments with the rabbit. Diphenylthiazole derivatives (10) were more potent than diphenylimidazole derivatives (4) in inhibiting arachidonic acid-induced platelet aggregation of rabbit platelet-rich plasma. Two diphenylimidazole and eight diphenylthiazole derivatives were evaluated for ex vivo arachidonic acid and collagen-induced platelet aggregation inhibitory activity using guinea pigs. In these compounds, 4,5-bis(4-methoxyphenyl)-2-(1,5-dimethyl-2-pyrrolyl)thiazole (10n) showed strong activity in vitro and ex vivo. The ex vivo activity of 10n was 200 times stronger than that of aspirin. The mechanism of the activity of 10n was the inhibition of cyclo-oxygenase.     

The effects of adsorbed water on tensile strength and Young's modulus of moldings determined by means of a three-point bending method

Young's moduli (E) of three representative tableting excipients and their mix powders were measured for compressed rectangular beam specimens over a range of porosities using a three-point bending technique. We also examined the effects of the amount of water adsorbed on the tensile strength of these specimens. The maximal tensile strength (sigma(max)) decreased with increasing water vapor adsorption for microcrystalline cellulose (MCC) and mixed powders of lactose and MCC. Sigma(max) increased with increasing compression stress and specimen weight for all samples. Sigma(max) of an alpha-lactose and cornstarch mixture with a ratio of 7:3 showed a large value. Young's modulus (E) and the crushing energy (CE) of MCC were larger than those of the other samples. Young's modulus of specimens decreased as the proportion of alpha-lactose increased. Disintegration time (DT) of tablets comprised of lactose and MCC mixture was much faster than those of tablets comprised of individual powders. This appeared to demonstrate the effect of MCC swelling on the disintegration time of the tablet. The disintegration time of the lactose/cornstarch series increased only when Young's modulus increased sharply.