Phytochemical analysis and antimicrobial activities of methanolic extracts of leaf, stem and root from different varieties of Labisa pumila Benth

A local herb, Kacip Fatimah, is famous amongst Malay women for its uses in parturition; however, its phytochemical contents have not been fully documented. Therefore, a study was performed to evaluate the phenolics, flavonoids, and total saponin contents, and antibacterial and antifungal properties of the leaf, stem and root of three varieties of Labisia pumila Benth. Total saponins were found to be higher in the leaves of all three varieties, compared to the roots and stems. Leaves of var. pumila exhibited significantly higher total saponin content than var. alata and lanceolata, with values of 56.4, 43.6 and 42.3 mg diosgenin equivalent/g dry weight, respectively. HPLC analyses of phenolics and flavonoids in all three varieties revealed the presence of gallic acid, caffeic acid, rutin, and myricetin in all plant parts. Higher levels of flavonoids (rutin, quercitin, kaempferol) were observed in var. pumila compared with alata and lanceolata, whereas higher accumulation of phenolics (gallic acid, pyrogallol) was recorded in var. alata, followed by pumila and lanceolata. Antibacterial activities of leaf, stem and root extracts of all varieties determined against both Gram positive (Micrococcus luteus, Bacillus subtilis B145, Bacillus cereus B43, Staphylococcus aureus S1431) and Gram negative (Enterobacter aerogenes, Klebsiella pneumonia K36, Escherichia coli E256, Pseudomonas aeruginosa PI96) pathogens showed that crude methanolic extracts are active against these bacteria at low concentrations, albeit with lower antibacterial activity compared to kanamycin used as the control. Antifungal activity of methanolic extracts of all plant parts against Fusarium sp., Candida sp. and Mucor using the agar diffusion disc exhibited moderate to appreciable antifungal activities compared to streptomycin used as positive control.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil

Thermal conductivity of α-Al₂O₃ was measured using hot wire method. α-Al₂O₃ (20 nm in size) was synthesized by microwave method for which, the results were compared with commercially available γ-Al₂O₃. Thermal conductivity of nanofluids was investigated considering, it is dependency on Al₂O₃ phase. It was observed that by adding 3 wt% of nano γ-Al₂O₃ and α-Al₂O₃ to the engine oil, thermal conductivity increases by 37 and 31%, respectively. The corresponding viscosity increase for the same amount of nano γ-Al₂O₃ and α-Al₂O₃ were 36 and 38%, respectively. It was concluded that the differences in thermal conductivity originate from higher specific surface area of γ-Al₂O₃ compared to the α-Al₂O₃ which is the result of porosity difference, obtained during the synthesis process.     

A novel numerical scheme for the investigation of surface tension effects on growth and collapse stages of cavitation bubbles

In the present study the effects of surface tension on the growth and collapse stages of cavitation bubbles are studied individually for both spherical and nonspherical bubbles. The Gilmore equation is used to simulate the spherical bubble dynamics by considering mass diffusion and heat transfer. For the collapse stage near a rigid boundary, the Navier–Stokes and energy equations are used to simulate the flow domain, and the VOF method is adopted to track the interface between the gas and the liquid phases. Simulations are divided into two cases. In the first case, the collapse stage alone is considered in both spherical and nonspherical situations with different conditions of bubble radius and surface tension. According to the results, surface tension has no significant effects on the flow pattern and collapse rate. In the second case, both the growth and collapse stages of bubbles with different initial radii and surface tensions are considered. In this case surface tension affects the growth stage considerably and, as a result, the jet velocity and collapse time decrease with increasing surface tension coefficient. This effect is more significant for bubbles with smaller radii.     

Rock Porous Structure Characterization: A Critical Assessment of Various State-of-the-Art Techniques

Transport in Porous Media - The porous structure of geomaterials is of utmost importance for various industrial and natural processes. In this study, various conventional porous structure...     

A Capillary Water-Retention Framework for the Effective Stress Parameter Considering Hydraulic Hysteresis

Transport in Porous Media - The establishment of the representative elementary volume (REV) in studies of porous media is crucial for linking microscopic structure and pore-scale fluid...     

Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Low-Field NMR Relaxation Analysis of High-Pressure Ethane Adsorption in Mesoporous Silicas

Understanding the behaviour of short-chain hydrocarbons confined to porous solids informs the targeted extraction of natural resources from geological features, and underpins rational developments in separation, storage and catalytic conversion processes. Herein, we report the application of low-field (12.7 MHz) ¹H nuclear magnetic resonance (NMR) relaxation measurements to characterise ethane dynamics within mesoporous silica materials exhibiting mean pore diameters between 6 and 50 nm. Our measurements provide NMR-based adsorption isotherms within the range 25–50 bar and at ambient temperature, incorporating the ethane condensation point (40.7 bar at our experimental temperature of 23.6 °C). The quantitative nature of the acquired data is validated via a direct comparison of NMR-derived excess adsorption capacities with ex situ gravimetric ethane adsorption measurements, which are demonstrated to agree to within 0.2 mmol g⁻¹ of the observed ethane capacity. NMR relaxation time distributions are further demonstrated as a means to decouple interparticle and mesopore dominated adsorption phenomena, with unexpectedly rapid relaxation rates associated with interparticle ethane gas confirmed via a direct comparison with NMR self-diffusion analysis.     

Excitation of plant growth in dormant temperature by steady magnetic field

Experimental results of applying a steady magnetic field (20 and 30 mT) on agricultural plants reveal that their growth is more than that of control plants. Considering that these plants have ferritin cells, and each ferritin cell has 4500 Fe atoms, it is obvious that they have an outstanding role in the plants’ growth. As the last spin magnetic moment (SMM) of the Fe atom posed to an external magnetic field (EMF), the composition of SMM and EMF create an oscillator in the system. Then we have a moment of force on ferritin cells. This oscillator exerts its energy, then damps and finally locates in the field direction. The relaxed energy increased the internal temperature (i.e., the effective temperature of the magnetic spin system of plant) so that it is situated in a proper temperature for growing. This phenomenon (temperature increasing) occurs in the initial minutes of applying the magnetic field. So it depends on the number of times of locating the plant in magnetic field in a day (n). If this number (n) passes the critical value, the plant reaches a burning temperature and growth is perturbed. In this paper, the plant growth rate and critical temperature in a steady magnetic field were investigated and formulated theoretically. An innovative result in this research is as follows: if a plant's environment was in the dormant temperature, we could increase the internal temperature of the plant by applying a magnetic field n times in a day (for growth).     

DFT Calculations of the Elimination Kinetics of Silacyclobutanes and its Methyl Derivatives in the Gas-Phase

Abstract

The gas-phase thermal decomposition kinetics of silacyclobutane (1), 1-methyl- silacyclobutane (2), and 1,1-dimethyl-1-silacyclobutane (3) has been theoretically studied at the B3LYP/6-311G**, B3PW91/6-311G**, and MPW1PW91/6-311G** levels. The B3LYP/6-311G** method was found to give a reasonable good agreement with the experimental kinetics and thermodynamic parameters. The decomposition reaction of compounds 1–3 yields ethylene and the corresponding silene. Based on the optimized ground state geometries using B3LYP/6-311G** method, the natural bond orbital (NBO) analysis of donor-acceptor (bonding–antibonding) interactions revealed that the perturbation energies (E₂) associated with the electronic delocalization from σ_Si1–C2 to σ*_C4–Si1 orbitals increase from compounds 1 to 3. The σ_Si1–C2→σ*_C4–Si1 resonance energies for compounds 1–3 are 1.17, 1.26, and 1.43 kcal/mol, respectively. Also, the decomposition process in these compounds is controlled by σ→σ* resonance energies. Moreover, the obtained order of energy barriers could be explained by the number of electron-releasing methyl groups substituted to the Si_sp2 atom. NBO analysis shows that the occupancies of σ_Si1–C2 bonds decrease for compounds 1–3 as 3 < 2 < 1, and the occupancies of σ*_Si1–C2 bonds increase in the opposite order (3 > 2 > 1). Moreover, these results can fairly explain the decrease of the energy barriers (ΔE_o) of the decomposition reaction of compounds 1 to 3. The calculated data demonstrate that in the decomposition process of the studied compounds, the polarization of the C₃–C₄ bond is the rate determining factor. Analysis of bond orders, NBO charges, bond indexes, synchronicity parameters, and IRC calculations indicate that these reactions are occurring through a concerted and asynchronous four-membered cyclic transition state type of mechanism.