Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

The development and assessment of high‐throughput mass spectrometry‐based methods for the quantification of a nanoparticle drug delivery agent in cellular lysate

The safe use of lipid‐based drug delivery agents requires fast and sensitive qualitative and quantitative assessment of their cellular interactions. Many mass spectrometry (MS) based analytical platforms can achieve such task with varying capabilities. Therefore, four novel high‐throughput MS‐based quantitative methods were evaluated for the analysis of a small organic gene delivery agent: N,N‐bis(dimethylhexadecyl)‐1,3‐propane‐diammonium dibromide (G16‐3). Analysis utilized MS instruments that detect analytes using low‐resolution tandem MS (MS/MS) analysis (i.e. QTRAP or linear ion trap in this work) or high‐resolution MS analysis (i.e. time of flight (ToF) or Orbitrap). Our results indicate that the validated fast chromatography (FC)‐QTRAP‐MS/MS, FC‐ LTQ‐Orbitrap‐MS, desorption electrospray ionization‐collision‐induced dissociation (CID)‐MS/MS and matrix assisted laser desorption ionization‐ToF/ToF‐MS MS methods were superior in the area of method development and sample analysis time to a previously developed liquid chromatography (LC)‐CID‐MS/MS. To our knowledge, this is the first evaluation of the abilities of five MS‐based quantitative methods that target a single pharmaceutical analyte. Our findings indicate that, in comparison to conventional LC‐CID‐MS/MS, the new MS‐based methods resulted in a (1) substantial reduction in the analysis time, (2) reduction in the time required for method development and (3) production of either superior or comparable quantitative data. The four new high‐throughput MS methods, therefore, were faster, more efficient and less expensive than a conventional LC‐CID‐MS/MS for the quantification of the G16‐3 analyte within tissue culture. When applied to cellular lysate, no significant change in the concentration of G16‐3 gemini surfactant within PAM212 cells was observed between 5 and 53 h, suggesting the absence of any metabolism/excretion from PAM212 cells. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetics of thermal decomposition of a synthetic K–H3O jarosite analog

The thermal decomposition kinetics of a synthetic K–H₃O jarosite analog was determined from thermogravimetric analysis at various heating rates in air. A thermal decomposition mechanism was proposed based on X-ray analysis of partially decomposed material and distinct features observed during thermal decomposition analysis. The decomposition path is complex. The material was treated as a composite of K-jarosite, H₃O-jarosite, and a “vacancy component”. The evolution of (OH)^? and SO₃ from these individual components was modeled. The decomposition is broken into subreactions according to distinct features in the thermoanalytical measurements. The subreactions are arranged sequentially and in parallel according to the evolution of the participating phases. A set of associated apparent activation energies was determined using isoconversion analysis. Kinetic triplets were assigned to each subreaction. A reasonable match with the observed decomposition was achieved by varying pre-exponential factors.     

Evaluation of K–H3O jarosite as thermal witness material

The scope of this work was the assessment of thermo-oxidative deterioration, hydrothermal stability, and crystalline zone deterioration of some bookbinding leathers from some religious books published in XVIII century stored in Romanian libraries. In this purpose, the following thermal analysis methods were employed: thermogravimetry/derivative thermogravimetry (TG/DTG), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The thermo-oxidative damage of investigated leathers was characterized by the rate of the first thermo-oxidation process put in evidence in TG/DTG curves recorded in static air atmosphere. The hydrothermal stability was characterized by shrinkage temperature determined by DSC analysis of leathers in water excess. The damage of the crystalline zone of leathers was determined by DSC in nitrogen flow and DMA analyses. The qualitative damage for each leather and each kind of degradation was evaluated using the criteria resulted by thermal analysis of a large number of collagen-based materials (pure collagens, new and old parchments and leathers). The obtained results could be used for finding the best possible methods for preservation and/or restoration of the investigated bookbinding leathers.     

Thermal degradation of trimethylolpropane/adipic acid hyperbranched poly(ester)s

Hyperbranched poly(ester)s offer attractive features for applications in a number of areas, particularly as platforms for the support of controlled release actives in the agricultural and biomedical fields. Such materials have been generated from trimethylolpropane and adipic acid, and fully characterized using chromatographic, spectroscopic, and thermal methods. The thermal stability of these polymers has been assessed using thermogravimetry and infrared spectroscopy. The degradation characteristics of these materials have been compared to those of two linear adipic acid polymers. The prominent feature of the thermal degradation of the hyperbranched poly(ester)s is ether formation while that for the comparable linear poly(ester)s is ester pyrolysis resulting in chain scission.     

Copper‐Catalyzed Cross‐Coupling of Boronic Esters with Aryl Iodides and Application to the Carboboration of Alkynes and Allenes

Copper‐catalyzed Suzuki–Miyaura‐type cross‐coupling and carboboration processes are reported. The cross‐couplings function well with a variety of substituted aryl iodides and aryl boronic esters and allows for orthogonal reactivity compared to palladium‐catalyzed processes. The carboboration method includes both alkynes and allenes and provides access to highly substituted and stereodefined vinyl boronic esters. The alkyne carboboration method is highlighted in the simple one‐pot synthesis of Tamoxifen.