Conjugate addition of (trimethylstannyl)copper reagents to α,β-acetylenic N,N-dimethylamides. Trapping of the intermediates with electrophiles

A study of the reaction of Me₃SnCu·.Me₂S (1) and [Me₃SnCuSPh]Li (2) with α,β - acetylenic N,N-dimethylamides 3 shows (a) that the overall process can be controlled experimentally so as to produce either N,N-dimethyl ($\text{E}$)-(4) or ($\text{Z}$)-3-trimethylstannyl-2-alkenamides (5), (b) that the initially formed intermediate derived from interaction of 2 and 3 is significantly more stable than that obtained by reaction of 2 and α,β-acetylenic esters, and (c) that the intermediate produced by treating 3 with 1 can be trapped with electrophiles other than proton.     

The mass spectra of some silver salts

Fifteen of twenty-four silver(I) carboxylates examined give useful electron impact mass spectra. The compounds vaporize at moderate temperatures, apparently mainly as dimer with traces of higher oligomer in only a few cases. The molecular ion for the dimer is generally weak or absent, with the most abundant silver containing ion being [Ag₂(O₂CR)]⁺ in most cases. Metastable defocusing and deuterium labeling experiments on silver acetate have established some of the fragmentation pathways. The reported loss of carbon dioxide from perfluorocarboxylates to give intense peaks for organosilver ions was not observed in this study. Attempts to obtain spectra on the silver salts of organic materials other than carboxylic acids were successful in several cases. Silver trifluoromethanesulfonate, although much less volatile, gives a spectrum and fragmentation very much like the carboxylates, whereas silver trifluoromethanethiolate gives a complex spectrum which suggests tetramer as a major gas phase species. Of three compounds examined which have silver to nitrogen bonding only silver(II) phthalocyanine is sufficiently volatile to give a spectrum without decomposition. The field desorption spectra of the four compounds examined all show the ions Ag_nX_{n ? 1} for X=acetate (n=1 ? 6), X=p-chlorobenzoate (n=1 ? 4), X=methanesulfonate (n=1 ? 7) and X=p-toluenesulfonate (n=1 ? 5).     

Yield of 16OS18O from the 18OH initiated oxidation of CS2 in 16O2

The yield of ¹⁶OS¹⁸O from the ¹⁸OH initiated oxidation of CS₂ in ¹⁶O₂ was measured by using a discharge flow reactor coupled to a chemical ionization mass spectrometer. ¹⁶OS¹⁸O is the dominant SO₂ isotopomer produced with a yield of 0.90 ± 0.20 relative to ¹⁸OH loss. The errors are estimates for the uncertainty at the 95% confidence level. The implications of these results to the understanding of the CS₂ oxidation mechanism are discussed. © 1994 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

     

Elution order in gas chromatography

The retention behavior of a heterogeneous group of solutes has been examined on seven different stationary phases under isothermal and temperature-programmed conditions. Both ΔH_v (enthalpy of solute vaporization from the stationary phase) and ΔS_v (entropy of solute vaporization from the stationary phase) values were determined for each solute – stationary phase combination under isothermal conditions. Both program rate and carrier gas velocity were shown to affect solute elution order. Unless these and other experimental factors discussed are controlled, column equivalency studies based on solute elution order have dubious value.     

Barrierless electron transfer bond fragmentation reactions

The ultrafast N-O bond fragmentation in a series of N-methoxypyridyl radicals, formed by one-electron reduction of the corresponding N-methoxypyridiniums, has been investigated as potentially barrierless electron-transfer-initiated chemical reactions. A model for the reaction involving the electronic and geometric factors that control the shape of the potential energy surface for the reaction is described. On the basis of this model, molecular structural features appropriate for ultrafast reactivity are proposed. Femtosecond kinetic measurements on these reactions are consistent with a kinetic definition of an essentially barrierless reaction, i.e., that the lifetime of the radical is a few vibrational periods of the fragmenting bond, for the p-methoxy-N-methoxypyridyl radical.     

Application of the energy gap law to the decay of charge transfer excited states,solvent effects

Values of non-radiative decay rate constants (k_nr) and emission energies (E_cm) have been obtained for Os(Phen₃)²⁺ in a series of solvents and the results are consistent with the energy gap law. For hydroxylic solvents like water or methanol related studies suggest the existence of strong, specific contributions to the vibrational trapping energy of the solvent.     

Photophysics of aromatic molecules with low-lying pi sigma* states: excitation-energy dependence of fluorescence in jet-cooled aromatic nitriles

Excitation-energy dependence of fluorescence intensity and fluorescence lifetime has been measured for 4-dimethylaminobenzonitrile (DMABN), 4-aminobenzonitrile (ABN), 4-diisopropylaminobenzonitrile (DIABN), and 1-naphthonitrile (NN) in a supersonic free jet. In all cases, the fluorescence yield decreases rather dramatically, whereas the fluorescence lifetime decreases only moderately for S1 (pi pi*, L(b)) excess vibrational energy exceeding about 1000 cm(-1). This is confirmed by comparison of the normalized fluorescence excitation spectrum with the absorption spectrum of the compound in the vapor phase. The result indicates that the strong decrease in the relative fluorescence yield at higher energies is due mostly to a decrease in the radiative decay rate of the emitting state. Comparison of the experimental results with the TDDFT potential energy curves for excited states strongly suggests that the decrease in the radiative decay rate of the aminobenzonitriles at higher energies is due to the crossing of the pi pi* singlet state by the lower-lying pi sigma*(C[triple bond]N) singlet state of very small radiative decay rate. The threshold energy for the fluorescence "break-off" is in good agreement with the computed energy barrier for the pi pi*/pi sigma* crossing. For NN, on the other hand, the observed decrease is in fluorescence yield at higher excitation energies can best be attributed to the crossing of the pi pi* singlet state by the pi sigma* triplet state.     

Hydroxamic acid polymers

A polymer bearing hydroxamic acid groups and having a high affinity for iron(III) was prepared through the following procedure. Acryloylalanine (III), prepared by the reaction of acryloyl chloride with alanine, was treated with N-hydroxysuccinimide in the presence of dicyclohexylcarbodiimide to give the N-hydroxysuccinimide ester (IV). The ester IV was polymerized by using AIBN in dioxane to give polymer V. Treatment of polymer V with methylhydroxylamine in DMF gave the hydroxamic acid polymer II. The water-soluble polymer II was purified by dialysis or by gel-permeation chromatography (GPC) on Sephadex G-25. Analytical GPC on Sephadex G-200 and Sepharose 4B indicate that the average molecular weight of the polymer is in the range of 5 × 10⁵ to 1 × 10⁶. The presence of hydroxamic acid groups is confirmed by the intense red-brown color produced by the addition of iron(III) to a 50% aqueous DMF solution of the polymer under acidic conditions. In pure water the polymer-iron complex precipitates as a tan solid. Iron-binding studies of the polymer reveal that the iron(III) trihydroxamic acid complex FeA₃ forms at low concentrations of iron. At higher iron levels a lower order of stability is apparent, which can be accounted for by the conversion of FeA₃ to FeA₂⁺. In contrast, the FeA₃ complex of the trihydroxamic acid deferoxamine-B is stable at all iron levels. These results are consistent with the polymer structure, which for steric reasons would favor a stable complex, FeA₂⁺, between iron and two adjacent hydroxamic acid groups. An FeA₃ complex would be expected to have a lower stability as a result of either bond angle strain and atomic compression, or a lower probability in bringing a third hydroxamic acid into position to form the octahedral complex.     

Luminescent properties of PP and LDPE films and rods doped with the Eu(III)‐La(III) complex

The work is devoted to luminescent properties of trivalent lanthanide complexes dispersed in thermoplastic host matrices. Polyethylene films and polypropylene‐rods, both doped with these complexes, were manufactured using an extrusion technique. Two kinds of dopants were used: Eu(III)‐thenoyltrifluoroacetone‐1,10‐phenanthroline complex (1) and Eu(III)‐La(III)‐1,10‐phenanthroline complex (2). Absorption, excitation, emission spectra and lifetime of luminescence were studied. The impact of the polymer matrix on the emission spectra was investigated. Emission spectra of the films were studied at room and helium temperatures. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) surface mapping showed that in the Eu(III)‐La(III) complex europium forms islands (clusters) with a dimension of 1 µm, whereas lanthanum was dispersed more uniformly in the polymer matrix. Dependence of emission intensity on the excitation was determined. Copyright © 2006 John Wiley & Sons, Ltd.     

Triiron and Triruthenium Carbonyl Clusters Bearing Bridging Long Chain Diphosphine and Capping Chalcogenido Ligands

Treatment of Ru₃(CO)₁₂ with dpphSe₂ (dpph = 1,6-bis(diphenylphosphino)hexane) in refluxing toluene in the presence of Me₃NO afforded two new compounds, Ru₃(CO)₇(-CO)(₃-Se)(-dpph) (1) and Ru₃(CO)₇(₃-Se)₂(-dpph) (2). A similar reaction of Ru₃(CO)₁₂ with dpppeSe₂ (dpppe = 1,5-bis(diphenylphosphino)pentane) gave exclusively Ru₃(CO)₇(₃-Se)₂(-dpppe) (3). Treatment of Ru₃(CO)₁₂ with dpphS₂ and dpppeS₂ at 110°C in the presence of Me₃NO afforded Ru₃(CO)₇(₃-S)₂(-dpph) (4) and Ru₃(CO)₇(₃-S)₂(-dpppe) (5), respectively. Reactions of Fe₃(CO)₁₂ with dpphSe₂ and dpppeSe₂, under identical conditions, afforded Fe₃(CO)₇(₃-Se)₂(-dpph) (6) and Fe₃(CO)₇(₃-Se)₂(-dpppe) (7), respectively. Compounds 1–7 were characterized spectroscopically and the molecular structures of compounds 1–4 were determined by single crystal X-ray crystallography. The core of 1 contains an equilateral triangle of ruthenium atoms with one capping selenium, one bridging dpph, one doubly bridging carbonyl and seven terminal carbonyl ligands. Complexes 2–4 have a square-pyramidal structure with two metal and two chalcogenide atoms alternating in the basal plane and the third metal atom at the apex of the pyramid, and belong to the family of well-known nido clusters with seven skeletal electron pairs.