Transformation optics and infrared metamaterials for optical devices

The coordinate transformation approach is applied for the design of an optical mode adaptor between two different width waveguides in the near IR telecom optical domain. The control of the mode profile in the adaptor is achieved by considering a composite waveguide consisting of a thin metamaterial (MM) layer intercalated between 2???m thick SU8 photoresist slab and a glass substrate. We demonstrate that intercalated metafilm enables the realization of a space coordinate transformation and allows a precise control of the light propagation in the composite waveguide. Numerical simulations and experimental realizations of the metamaterial layer are performed in order to validate the device concept and realization feasibility.     

Fibrous Networks with Incorporated Macrocycles: A Chiral Stimuli‐Responsive Supramolecular Supergelator and Its Application to Biocatalysis in Organic Media

A new and versatile, crown ether appended, chiral supergelator has been designed and synthesized based on the bis‐urea motif. The introduction of a stereogenic center improved its gelation ability significantly relative to its achiral analogue. This low‐molecular‐weight gelator forms supramolecular gels in a variety of organic solvents. It is sensitive to multiple chemical stimuli and the sol–gel phase transitions can be reversibly triggered by host–guest interactions. The gel can be used to trap enzymes and release them on demand by chemical stimuli. It stabilizes the microparticles in Pickering emulsions so that enzyme‐catalyzed organic reactions can take place in the polar phase inside the microparticles, the organic reactants diffusing through the biphasic interface from the surrounding organic phase. Because of the higher interface area between the organic and polar phases, enzyme activity is enhanced in comparison with simple biphasic systems.     

An In-Situ X-Ray Microtomography Study of Split Cylinder Fracture in Cement-Based Materials

In an effort to quantify microstructure-property relationships, three dimensional imaging experiments were conducted on small cylinder specimens subjected to split cylinder fracture. 3-D images were made using synchrotron-based x-ray microtomography, and the experiments were conducted with an in-situ frame such that a specimen could be examined while under load at varying degrees of damage. The specimens were made of fine-grained portland cement mortar and 0.5 mm glass beads, which served as aggregates. The diameter of the specimens was 5 mm. 3-D image analysis routines were developed or adapted to characterize microstructure and internal damage, which could then be related to bulk splitting strength and fracture energy. For fracture energy calculation, crack surface area could be measured in a way that accounted for roughness, branching, and fragmentation. Results showed that, for the specimens tested, aggregate surface roughness had little effect on strength but significant effect on fracture energy. Split cylinder strength showed correlation with specimen porosity, although there was considerable scatter. Strength did not correlate with maximum flaw size, although flaw location was not evaluated.     

A novel non-invasive electrochemical biosensing device for in situ determination of the alcohol content in blood by monitoring ethanol in sweat

A non-invasive, passive and simple to use skin surface based sensing device for determining the blood's ethanol content (BAC) by monitoring transdermal alcohol concentration (TAC) is designed and developed. The proposed prototype is based on bienzyme amperometric composite biosensors that are sensitive to the variation of ethanol concentration. The prototype correlates, through previous calibration set-up, the amperometric signal generated from ethanol in sweat with its content in blood in a short period of time. The characteristics of this sensor device permit determination of the ethanol concentration in isolated and in continuous form, giving information of the BAC of a subject either in a given moment or its evolution during long periods of time (8 h). Moreover, as the measurements are performed in a biological fluid, the evaluated individual is not able to alter the result of the analysis. The maximum limit of ethanol in blood allowed by legislation is included within the linear range of the device (0.0005–0.6 g L⁻¹). Moreover, the device shows higher sensitivity than the breathalyzers marketed at the moment, allowing the monitoring of the ethanol content in blood to be obtained just 5 min after ingestion of the alcoholic drink. The comparison of the obtained results using the proposed device in the analysis of 40 volunteers with those provided by the gas chromatographic reference method for determination of BAC pointed out that there were no significant differences between both methods.     

Turbulence in microfluidics: Cleanroom-free,fast, solventless,and bondless fabrication and application in high throughput liquid-liquid extraction

This paper addresses an important breakthrough in the deployment of ultra-high adhesion strength microfluidic technologies to provide turbulence at harsh flow rate conditions. This paper is only, to our knowledge, the second reporting on the generation of high flow rate-assisted turbulence in microchannels. This flow solves a crucial bottleneck in microfluidics: the generation of high throughput homogeneous mixings. We focused on the fabrication of bulky polydimethylsiloxane (PDMS) microchips (without any interfaces) rather than the laborious surface modifications that were employed in the first reporting about turbulence-assisted microfluidics. The fabrication is cleanroom-free, simple, low-cost, fast, solventless, and bondless requiring only a laboratory oven. More specifically, our method relies on the shaping of a nylon scaffold, cure of PDMS with embedded nylon, and removal of this scaffold. The scaffold was obtained by manually wrapping nylon threads. The withdrawing out of the scaffold was completed in few seconds using only a plier. Such microchannels endured flow rates of up to 60.0 mL min⁻¹ with a strikingly low elastic deformation. The importance in producing turbulence into microscale channels was successfully shown in liquid-liquid extractions. The great energy dissipation rate relative to the turbulence created high throughput and efficient extractions in microfluidics for the first time. The residence time was only 0.01 s at 25.0 mL min⁻¹ (total flow rate of the immiscible phases). In addition, the partition coefficient determined in a single run was similar to that obtained by the conventional batch shake-flask method that was realized in triplicate.     

Testing the reliability of non-LTE spectroscopic models for complex ions

Collisional-radiative atomic models are widely used to help diagnose experimental plasma conditions through fitting and interpreting measured spectra. Here we present the results of a code comparison in which a variety of models determined plasma temperatures and densities by finding the best fit to an experimental L-shell Kr spectrum from a well characterized, but not benchmarked, laser plasma. While variations in diagnostic strategies and qualities of fit were significant, the results generally confirmed the typically quoted uncertainties for such diagnostics of ±20% in electron temperature and factors of about two in density. The comparison also highlighted some model features important for spectroscopic diagnostics: fine structure was required to match line positions and relative intensities within each charge state and for density diagnostics based on emission from metastable states; an extensive configuration set was required to fit the wings of satellite features and to reliably diagnose the temperature through the inferred charge state distribution; and the inclusion of self-consistent opacity effects was an important factor in the quality of the fit.