Synthesis of homochiral dihydroxy-4-nitroisoxazolines via one-pot asymmetric dihydroxylation-reduction

Herein we report a one-pot procedure to prepare a family of homochiral dihydroxy-4-nitroisoxazolines 3. This new methodology affords the title compounds in good yields, excellent enantiopurity, and without the use of chromatography.     

Separation and quantitation of several angiotensin II receptor antagonist drugs in human urine by a SPE-HPLC-DAD method

In this work, an SPE-HPLC method coupled to photodiode array detection was validated in human urine matrix, in order to monitor four antihypertensive angiotensin II receptor antagonist drugs in patients under cardiovascular treatment. For that purpose, experimental design was used. Quantitation was accomplished by the internal standard method. The obtained LOQs were 95, 113, 125, and 85 ng/mL for eprosartan, telmisartan, irbesartan, and valsartan, respectively. The intraday and interday precision and accuracy at four concentration levels in the working range (LOQ-15 microg/mL) were always lower than 11% RSD and 8% relative error. The urine samples proved to be stable during 4 h at room temperature, after three thaw-freeze cycles, and for 2 months at -20 degrees C. No interferences from other endogenous compounds or co-administered drugs were found. The method has been successfully applied to monitor the renal elimination of eprosartan and valsartan during 24 h.     

A Comparison of Modeling Approaches for Dispersion Homopolymerization of MMA and Styrene in Supercritical CO2

A comparison of kinetic models for dispersion polymerization of MMA and styrene in supercritical CO₂ is presented. The limiting case of solution polymerization, as a simplified case, was also addressed. Calculation of the partition of components between the continuous and dispersed phases was emphasized. Experimental data for the solution and dispersion polymerizations of styrene and MMA, using different types of stabilizers, were used to guide the study. Although all the models analyzed can be considered as “adequate” in representing the behavior of the system, some of their strengths and drawbacks have been highlighted.

     

Microwave-enhanced sulphated zirconia and SZ/MCM-41 catalyzed regioselective synthesis of beta-amino alcohols under solvent-free conditions

A solvent-free approach for the regioselective synthesis of beta-amino alcohols in shorter reaction times and higher yields, compared to conventional heating is described. It involves microwave (MW) exposure of undiluted reactants in the presence of sulphated zirconia (SZ) or sulphated zirconia over MCM-41 (SZM) as catalyst. Both acid materials can be easily recovered and reused.     

Synthesis and solid state characterization of hexacoordinated 1:1 ionic gallium(III) complexes

The coordination of the N,N ligands 2,2-bipyridine (bipy) and 1,10-phenanthroline (phen) to Ga(III) has been investigated via the formation of new ionic hexacoordinated complexes of general formula [Q'(2)Ga(N,N)][X], where HQ' stands for 2-methyl-8-hydroxyquinoline and the counter anion X(-) is nitrate (NO(3)(-)) or hexafluorophosphate (PF(6)(-)). All synthesized complexes were characterized by single-crystal X-ray diffraction analysis. The geometry of the Ga(III) cations is octahedral and a single geometric isomer (all N, N trans conformation) has been obtained in all cases. The role of both the N,N ligand and the counter anion has been investigated in the formation of the crystal supramolecular motifs occurring in the 3D-crystal networks of these new class of ionic Ga(III) derivatives. A full investigation of the photophysical properties of the new synthesized ionic species is reported and discussed in relation to their crystalline packing and the degree of crystallinity of thin solid films as well as the nature of the N,N ligand and the counter anion.     

An inexpensive, portable and microcontrolled near infrared LED-photometer for screening analysis of gasoline

A microcontrolled, portable and inexpensive photometer is proposed. It uses a near infrared light emitting diode (NIR LED) as radiation source, a PbSe photoresistor as infrared detector and a programmable interrupt controller (PIC) microcontroller as control unit. The detector system presents a thermoresistor and a thermoelectric cooling to control the detector temperature and keep the noise at low levels. The microcontroller incorporated total autonomy on the proposed photometer. As its components are inexpensive and of easy acquisition, the proposed NIR LED-photometer is an economical alternative for chemical analyses in small routine, research and/or teaching laboratories. By being portable and microcontrolled, it also allows carrying out field chemical analyses. The instrument was successfully applied on the screening analysis to verify adulteration in gasoline samples.     

Optimization and validation of a capillary electrophoresis methodology for inorganic anions in atmospheric aerosol samples

Optimization and validation of a method for the determination of inorganic anions, such as chloride, nitrate, sulphate, fluoride and phosphate, in atmospheric particulate matter is described. Ultrasonic extraction followed by CE, using CTAB as EOF modifier, has been established for this separation using chromate as visualization reagent for the indirect UV/vis detection. Optimization of the experimental chemical conditions (pH, surfactant concentration, chromate concentration and acetonitrile concentration) and instrumental parameters (temperature, applied voltage and injection time) is described. Linear calibrations plots are obtained for the five ions, with detection limits in the high ng/mL range. A standard reference material, SRM 1648 Urban Particulate Matter, has been used to validate the proposed method. Satisfactory reproducibility and acceptable agreement to the matter atmospheric samples has been found (recoveries ranging from 86 to 96%). Application to real particulate matter atmospheric samples, collected on high volume samplers from the air quality surveillance network of Extremadura, southwest Spain, is shown.     

Preparation and characterization of new solid-phase microextraction fibers obtained by sol-gel technology and zirconium oxide electrodeposited on NiTi alloy

This study describes the use of zirconium oxide electrolytically deposited onto a NiTi alloy as a new substrate for sol-gel reactions. Polydimethylsiloxane (PDMS) was used to coat the fiber after activation of the NiTi-ZrO(2) surface with sodium hydroxide solution followed by hydrochloric acid solution. Micrographs obtained by scanning electron microscopy (SEM) showed good uniformity of the PDMS coating on the proposed substrate and also permitted the evaluation of coating thickness, being approximately 25 microm. Thermal stability of the coating on the NiTi-ZrO(2) surface was evaluated, showing excellent stability up to 320 degrees C. The applicability of the proposed NiTi-ZrO(2)-PDMS fiber was evaluated through extraction of benzene, toluene, ethylbenzene and o-xylene (BTEX) from the headspace of aqueous samples. Some parameters affecting the extraction efficiency such as the salting-out effect, extraction temperature and extraction time were optimized by two consecutive two-level full-factorial experimental designs. This optimization allowed the experimental domain of maximum response to be attained and also the robustness range for the variables. Excellent detection limits in the range of 0.6-1.6 microg L(-1) were obtained as well as correlation coefficients higher than 0.99994. Precision for one fiber (n=7) was in the range of 1.4-4.0% and fiber-to-fiber reproducibility (n=5) was in the range of 3.9-6.7%. Comparison of the extraction profile of the proposed fiber with those of commercially available 100, 30 and 7 microm PDMS fibers showed that NiTi-ZrO(2)-PDMS had a better response compared to that of the 7 and 30 microm fibers. Such characteristics of the NiTi-ZrO(2)-PDMS fiber suggest that this fiber represents an excellent alternative for gas chromatography sample preparation.     

Single-injection calibration approach for high-performance liquid chromatography

A new calibration method for high-performance liquid chromatography was validated. The method was called single-injection calibration approach (SICA) because it allowed to obtain a complete calibration curve by means of a single injection of a standard solution containing several non-volatile and semi-volatile organic compounds at different concentration levels. The compounds studied included carboxylic acids, polyalcohols, carbohydrates and water-soluble vitamins. This method allowed a 1-7-fold reduction in the analysis time with regard to conventional calibration methods. The method was applied to three different chromatographic detection methods: refractive index (RI) detection, diode array detection (DAD) and inductively coupled plasma atomic emission detection (ICP-AED). Good linearity was achieved (r(2)>0.999) for the three detection methods but signal correction was required for RI detection and DAD. This fact demonstrated that ICP-AES was the most universal because the signal obtained for non-volatile and semi-volatile organic compounds was not a function of the chemical nature of the compound and only depended on the mass content of carbon. The method was validated by analyzing a reference non-fat milk powder sample as well as several real food samples (three fruit juices, four wines, three candies and a multivitamin complex).