Structural and magnetic phase transitions in Pr2NiO4

Neutron powder diffraction and magnetization measurements have been performed in stoichiometric Pr₂NiO₄₊(0), which at room temperature (RT) is orthorhombic (Bmab). Ni²⁺ becomes three dimensionally (3D) antiferromagnetically ordered atT _N 325K, with a propagation vectork=[100], and spins oriented along thea axis (parallel to the propagation vector). The magnetic structure belongs to the _7g (––+)-representation (g _x mode, Shubnikov groupB _pmab') ofBmab, and a magnetic moment of 1.5 _B is measured at 155K. This compound undergoes two different structural phase transitions. First, going down in temperature, Pr₂NiO₄ transforms by a first order phase transition from orthorhombic (Bmab) to tetragonal (P4₂/ncm) atT _c1115K. At high temperature, we can predict a transformation from orthorhombic (Bmab) to tetragonal (I4/mmm) in a continuous way. The extrapolated temperature for this second structural transition isT _c21500±100K. The low temperature structural transformation allows a change in the magnetic structure which forT<T _c1 is better described in the orthorhombic symmetry. Just belowT _c1 the magnetic structure is described by the: _3g (–+)-representation ofPccn(g_xc_yf_z mode, Shubnikov groupPccn), this magnetic phase begins to disappear going down in temperature and at the same time a new magnetic phase grows. This new magnetic structure is described by the _1g ofPccn (c _xg_ya_z mode, Shubnikov groupPccn). Both magnetic structures coexist in a certain temperature range. At 1.5 K thec _xg_ya_z mode represents the total of the magnetic ordering. To reproduce the observed magnetic intensities we are forced to consider that Pr³⁺ is polarized below 40 K, with a magnetic structure which is coupled to the Ni sublattices (i.e. _1g and _3g ). The magnetic moment at low temperature for Pr is about 1.28 _B .     

Development of a nanostructured filter for pyrolysis wax purification:Effects of particulate filter aids

Wax obtained from the pyrolysis of polyethylene waste can contain inorganic contaminants and must be purified before application.We evaluated different filter aids(perlite,sand,and rice husk ash)for the filtration of a crude wax and a pyrolysis wax through a filter medium that was coated with nylon 6 nanofibers to improve filtration efficiency.We first examined the performance of the filter aids in improving crude wax filtration,with the filtration time,temperature,and pressure held constant at 1 h,170℃,and 2.5 bar,respectively.Oily wax was then produced by pyrolysis of high-density polyethylene(HDPE)waste in the temperature range 425-475℃.The best filter aid was perlite,which had a filtrate production rate of 5.47×10^-5m³/h.The highest oily wax yield(87.8%)was achieved at a pyrolysis temperature of 425℃.The assembly comprising the filter medium coated with nylon 6 nanofibers plus perlite as a filter aid was most suitable for removing impurities from the oily wax generated by the HDPE pyrolysis as it achieved a purification efficiency of 99.9%.     

Enantioselective 1,3-Dipolar Cycloaddition Using (Z)-α-Amidonitroalkenes as a Key Step to the Access to Chiral cis-3,4-Diaminopyrrolidines

The enantioselective 1,3-dipolar cycloaddition between imino esters and (Z)-nitroalkenes bearing a masked amino group in the β-position was studied using several chiral ligands and silver salts. The optimized reaction conditions were directly applied to the study of the scope of the reaction. The determination of the absolute configuration was evaluated using NMR experiments and electronic circular dichroism (ECD). The reduction and hydrolysis of both groups was performed to generate in an excellent enantiomeric ratio the corresponding cis-2,3-diaminoprolinate.     

Anticonvulsant Effect of Turmeric and Resveratrol in Lithium/Pilocarpine-Induced Status Epilepticus in Wistar Rats

Epilepsy is a chronic neurological disorder that lacks a cure. The use of plant-derived antioxidant molecules such as those contained in turmeric powder and resveratrol may produce short-term anticonvulsant effects. A total of 42 three-month-old male Wistar rats were divided into six groups (n = 7 in each group): Vehicle (purified water), turmeric (150 and 300 mg/kg, respectively), and resveratrol (30 and 60 mg/kg, respectively), administered per os (p.o.) every 24 h for 35 days. Carbamazepine (300 mg/kg/5 days) was used as a pharmacological control for anticonvulsant activity. At the end of the treatment, status epilepticus was induced using the lithium–pilocarpine model [3 mEq/kg, intraperitoneally (i.p.) and 30 mg/kg subcutaneously (s.c.), respectively]. Seizures were evaluated using the Racine scale. The 300 mg/kg of turmeric and 60 mg/kg of resveratrol groups had an increased latency to the first generalized seizure. The groups treated with 150 and 300 mg/kg of turmeric and 60 mg/kg of resveratrol also had an increased latency to status epilepticus and a decreased number of generalized seizures compared to the vehicle group. The chronic administration of turmeric and resveratrol exerts anticonvulsant effects without producing kidney or liver damage. This suggests that both of these natural products of plant origin could work as adjuvants in the treatment of epilepsy.     

Drug release system of ibuprofen in PCL-microspheres

Today, the technology of microencapsulation of active principles is on top of biomedical advances, because through it we can solve many of the problems caused by current methods of taking medication. Active principle microencapsulation not only solves the problems of drug intake but also controls its dosage. In this study was carried out the development of a protocol for the microencapsulation of ibuprofen by solvent evaporation method. A subsequent application of those microencapsulates to biofunctional textile substrates (cotton, polyamide, acrylic, and polyester) using a finishing process, and finally a study of the release of active principle in two different media (deionized water and physiological serum) has been carried out using samples of the treated fabrics that were submerged into a thermostatized vessel at semi-infinite bath conditions. The determination of active principles released to the bath was determined by a UV spectrophotometer. These experimental results have been analyzed and evaluated, and have therefore allowed to define a controlled drug release system by Fickian diffusion in different media.     

Experimental NMR and MS study of benzoylguanidines. Investigation of E/Z isomerism

Molecules containing the guanidinic nuclei possess several pharmacological applications, and knowing the preferred isomers of a potential drug is important to understand the way it operates pharmacologically. Benzoylguanidines were synthesized in satisfactory to good yields and characterized by NMR, Electrospray Ionization Mass Spectrometry (ESI‐MS) and Fourrier Transform InfraRed Spectroscopy techniques (FTIR). E/Z isomerism of the guanidines was studied and confirmed by NMR analysis in solution (¹H‐¹³C Heteronuclear Single Quantum Coherence (HSQC) and Heteronuclear Multiple‐Bond Correlation (HMBC), ¹H‐¹⁵N HMBC, ¹H‐¹H Correlation Spectroscopy (COSY) and Nuclear Overhauser Effect Spectroscopy (NOESY) experiments) at low temperatures. Compounds with p‐Cl and p‐Br aniline moiety exist mainly as Z isomer with a small proportion of E isomer, whereas compounds with p‐NO2 moiety showed a decrease in proportion of isomer Z. The results are important for the application of these molecules as enzymatic inhibitors. Copyright © 2013 John Wiley & Sons, Ltd.     

Biodegradable aromatic copolyesters made from bicyclic acetalized galactaric acid

Random poly(hexamethylene terephthalate‐co‐galactarate)s and poly(dodecamethylene terephthalate‐co‐galactarate)s copolyesters covering the whole range of compositions were obtained with weight‐average molecular weights of ～30,000–50,000 g mol^?1 by melt polycondensation. They were thermally stable above 300 °C, and displayed T_g in the +20 to ?20 °C range with values steadily decreasing with the content in galactarate units. All the copolyesters were semicrystalline with T_m between 50 and 150 °C and those made from dodecanediol were able to crystallize from the melt at a crystallization rate depending on composition. Copolyesters containing up to 50% of galactaric units retained the crystal structure of their respective polyterephthalate homopolyesters, whereas they adopted the structure of the respective polygalactarates when the content in Galx units reached 70%. Stress‐strain essays revealed decay in the mechanical parameters as the aromatic units were replaced by Galx. Incubation in aqueous buffer revealed that hydrolysis of the polyesters were largely enhanced by copolymerization and evidenced the capacity of the Galx unit for making aromatic polyesters susceptible to biodegradation. A detailed NMR analysis complemented by SEM observations indicated that hydrolysis took place by preferred splitting of galactarate ester bonds with releasing of alkanediol and Galx‐diacid. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

An improved generalized predictive control algorithm based on the difference equation CARIMA model for the SISO system with known strong interference

ABSTRACT

The single input single output (SISO) system with known strong interference is widely used in various occasions. Due to its strong interference, the control accuracy is hard to guarantee. To solve this problem, an improved generalized predictive control (IGPC) algorithm is developed. The IGPC firstly builds the difference equation CARIMA (Controlled Auto-Regressive Integrated Moving-Average) model of the SISO system and then treats the system as a two input single output (TISO) system and calculates its predictive vector, then transforms it into a SISO system and uses the TISO system predictive vector to calculate the SISO system control increment. A new parameter called phase coefficient is added to inhibit the control lag. Simulations are performed to make the comparison among the traditional GPC, PID control, velocity synchronization control (VSC), fuzzy adaptive PID control (FAPID), model-based robust PID control (BPID) and the IGPC. Results show that IGPC has best performance compared to the others. Finally, experiments are developed which proved that the IGPC algorithm has a higher accuracy in the SISO system with known strong interference than that of VSC.     

Onset of Chiral Adenine Surface Growth

The structure and stability of adenine crystals and thin layers has been studied by using scanning tunneling microscopy, X‐ray diffraction, and density functional theory calculations. We have found that adenine crystals can be grown in two phases that are energetically quasi‐degenerate, the structure of which can be described as a pile‐up of 2D adenine planes. In each plane, the structure can be described as an aggregation of adenine dimers. Under certain conditions, kinetic effects can favor the growth of the less stable phase. These results have been used to understand the growth of adenine thin films on gold under ultra‐high vacuum conditions. We have found that the grown phase corresponds to the α‐phase, which is composed of stacked prochiral planes. In this way, the adenine nanocrystals exhibit a surface that is enantiopure. These results could open new insight into the applications of adenine in biological, medical, and enantioselective or pharmaceutical fields.