Thermal characterization and compatibility studies of perovskite-type Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF) oxide with Cr2O3 at high temperature

The chemical compatibility of perovskite-type Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ (BSCF) oxides with Cr₂O₃ has been examined between room temperature and 1,100 °C. Differential thermal analysis and thermogravimetric analysis were used to analyze the thermal behavior of BSCF–Cr₂O₃ binary mixtures in all composition ranges (0–100 mass% BSCF). The reaction products were identified by X-ray analysis after heating at 700–1,100 °C. As we expected, it was found that perovskite-type BSCF oxide had a poor chemical compatibility with the Cr₂O₃ oxide. In particular, the decomposition process of the BSCF–Cr₂O₃ binary mixture is quite complex and it starts at about 700–750 °C. The mixtures of BSCF and Cr₂O₃ oxides reacted forming mixed complex oxides based on (Ba/Sr)FeO₃, (Co/Fe)CrO₄, and (Ba/Sr)CrO₄ mixtures.     

Synthesis and Ruthenium-Catalyzed Enantioselective Hydrogenation of 3-O-Substituted 1,3-Dihydroxypropan-2-ones. Part 2

A number of 3-O-substituted 1,3-dihydroxypropan-2-ones have been synthesized in view of their potential use as prochiral precursors of optically active glycerols. Indeed, the oxo-ethers have been reduced to the corresponding 3-O-substituted glycerols via chiral Ru complexes derived from (S)-binap, ( =(?)-(S)-2,2′-bis(diphenylphosphino)-1,1′-binaphthalene) with enantiomeric excesses up to 93%. The steric course of the catalytic reduction appears to be essentially dependent on the steric encumbrance of the substituents; indeed, a dramatic increase of the enantiomeric excess is observed when the bulky trityl group is substituted by the less encumbering benzyl or octadecyl groups.     

Thermoanalytical investigations on the solid-state synthesis of Sr-doped praseodymium alkaline-earth cobalt oxides

In this study, the formation and characteristics of Sr-doped praseodymium alkaline-earth cobalt oxide were studied as a function of the strontium content (x). PrBa_1?x Sr _x Co₂O_5+d ceramics with x?=?0.0, 1/16, 1/8, 1/4, and 1/2.5 were prepared by solid-state reaction method from Pr₆O₁₁, BaCO₃, SrCO₃, and Co₃O₄. The solid-state reaction mechanisms were analyzed by differential thermal analysis (DTA) and thermogravimetry (TG) techniques to characterize properly the distinct thermal events occurring during synthesis of layered perovskite-type PrBa_1?x Sr _x Co₂O_5+d oxides. The X-ray diffraction (XRD) results were used to assist the interpretation of DTA?CTG analyses. The TG, DTA, and XRD results for the mixtures showed that the solid-state reaction between precursors was completed in a temperature range between 800 and 1000?°C. The strong influence of strontium contents (x) on the solid-state reaction temperatures and PrBa_1?x Sr _x Co₂O_5+d structure was found.     

Ion chromatographic separation of car☐ylic acids prediction of retention data

The retention behavior of biologically relevant monovalent (formic, acetic, propionic, lactic and pyruvic) and divalent (oxalic, malonic, succinic, fumaric, maleic and tartaric acids) car☐ylic acids together with inorganic analytes (chloride and sulphate) has been studied. The separation was performed on a latex-based strong anion-exchange resin using carbonate buffer systems in suppressed IC. The retention behaviour of analytes was investigated at different pH values and [HCO₃⁻]+[CO₃²⁻] concentrations. A theoretical model, involving ion-exchange equilibria of sample and eluent anions, was derived and applied to the chromatographic data obtained. Chromatographic ion exchange selectivity values were determined and retention data were calculated for the anions using different carbonate eluent conditions. The average of errors between the predicted and the measured retention volumes of the analytes studied does not exceed 4.0%. The study effectively characteristics the behaviour of different analytes under elution conditions of practical importance.     

A Series of Iron(II)-NHC Sensitizers with Remarkable Power Conversion Efficiency in Photoelectrochemical Cells**

A series of six new Fe(II)NHC-carboxylic sensitizers with their ancillary ligand decorated with functions of varied electronic properties have been designed with the aim to increase the metal-to- surface charge separation and light harvesting in iron-based dye-sensitized solar cells (DSSCs). ARM130 scored the highest efficiency ever reported for an iron-sensitized solar cell (1.83 %) using Mg²⁺ and NBu₄I-based electrolyte and a thick 20 μm TiO₂ anode. Computational modelling, transient absorption spectroscopy and electrochemical impedance spectroscopy (EIS) revealed that the electronic properties induced by the dimethoxyphenyl-substituted NHC ligand of ARM130 led to the best combination of electron injection yield and spectral sensitivity breadth.     

Acidity of Alginate Aerogels Studied by FTIR Spectroscopy of Probe Molecules

Supercritical drying of alginate gels is an efficient way to prepare aerogels with high surface area (>300 m² · g⁻¹). FTIR spectroscopy allows to monitor the adsorption of NH₃ from the gas phase onto the acid sites of the alginate. Free carboxylic groups are effective Brønsted sites, whereas the divalent cations used in the ionotropic gelation present the properties of Lewis sites. The ratio between Brønsted and Lewis sites provides infomation on the role of pH in alginate gelation and suggests that non-buffered gelation by transition-metal cations is a mixed ionotropic-acid process.     

Direct flow injection profiling of acyl glycerols from food products using isopropanol as solvent

This work proposes a novel method for the direct flow injection profiling of acylglycerols in edible oils and fats without preliminary extraction and consequent reconstitution in the injection solvent. The work exploits the outstanding performance of high‐resolution mass spectrometry to target unique elemental compositions even in the most complex matrices. The performance of isopropanol as the unique solvent for both the solubilization and analysis of acylglycerols was investigated in comparison with other classical methods involving preliminary extractions, sample recovery, and analysis. The calibrations of two triglyceride standards (triolein and trilinolenin) were successfully performed in presence and absence of oil matrix. As final application, the effects on the acylglycerol fraction of a heat treatment on three different fat samples (extra virgin olive oil, lard oil, and fat from dry cured ham—speck) were monitored. The proposed method is therefore suitable for a rapid evaluation of acylglycerol fractions in food lipid samples.     

New Class of Chiral Diphosphine Ligands for Highly Efficient Transition Metal-Catalyzed Stereoselective Reactions: The Bis(diphenylphosphino) Five-membered Biheteroaryls

The synthesis and application of three examples of a new class of chiral (C(2)) atropisomeric diphosphines characterized by two interconnected five-membered heteroaromatic rings, with hindered rotation around the interanular bond, are described. Optically pure (+)- and (-)-2,2'-bis(diphenylphosphino)-4,4',6,6'-tetramethyl-3,3'-bibenzo[b]thiophene (tetraMe-bitianp) (1a) and the parent unsubstituted system (+)- and (-)-bitianp (1b) were synthesized. They were found to be optically stable at 100 degrees C and were successfully employed as ligands in the Ru(II)-catalyzed hydrogenation of alpha- and beta-oxo esters to the corresponding alpha- and beta-hydroxy esters and in the hydrogenation of olefinic substrates. The optical and chemical yields were comparable with those reported for the same Ru(II)-binap-catalyzed reactions carried out under the same experimental conditions. The 2,2'-bis(diphenylphosphino)-3,3'-bibenzo[b]furan (1c), the oxygenated analogue of bitianp, was found to be configurationally unstable at room temperature. Complete structural X-ray elucidation of the Pd complexes of 1a-c is reported. The advantages of these biheteroaromatic ligands over the classical biaryl systems are discussed.     

Screening and identification of major phytochemical compounds in seeds,sprouts and leaves of Tuscan black kale Brassica oleracea (L.) ssp acephala (DC) var. sabellica L.

We report the spectrophotometric determination of total polyphenols, flavonoids, glucosinolates and antioxidant activity in seeds, seedlings and leaves of Tuscan black kale. The highest content of phytochemicals was observed in 10 days sprouts and antioxidant activity was maximum in 2, 4 days seedlings. Identification and characterisation of phytochemicals were performed by mass spectrometry (MS), high resolution and tandem MS with electrospray ionisation mode. Low-molecular-weight metabolites were evidenced in seeds while metabolites at high m/z range were detected in cotyledons and leaves. MS spectra evidenced different phenolic compounds (flavonoid caffeoyl glucose, hydroxycinnamic acid sinapine) and glucosinolates (glucoerucin, glucobrassicin and glucoraphanin) in function of developmental stage; galactolipids ω3 and ω6 were observed in leaves. Identification of stages with the highest phytochemicals content encourages the consumption of black kale sprouts and young leaves. Our research can support food and pharmaceutical industries for production of health promoting products from black kale.