Bubble-size dependence of the critical electrolyte concentration for inhibition of coalescence

The interaction of pairs of bubbles with equal diameters grown on adjacent capillaries in aqueous magnesium sulfate solutions is observed for varying electrolyte concentrations and bubble diameters. As in previous investigations, a sharp transition from coalescence to bubble detachment without coalescence is observed with increasing electrolyte concentration. The critical electrolyte concentration for this transition is found to increase with decreasing bubble diameter for bubble diameters of 1.4 to 4.2 mm.     

Side-chain crystallinity. III. Influence of side-chain crystallinity on the glass transition temperatures of selected copolymers incorporating n-octadecyl acrylate or vinyl stearate

The influence of side-chain crystallinity on the glass transition temperatures of selected copolymers was investigated. The copolymers were selected, in part, from those whose crystallinity was treated in the preceding paper. These included the lower amorphous acrylate esters, such as methyl, ethyl, n-butyl, and 2-ethylhexyl acrylates, together with methyl methacrylate and acrylonitrile, each copolymerized with n-octadecyl acrylate over the range of composition. The decline in the glass transition temperature was linear with increasing weight fraction of n-octadecyl acrylate for all systems in the composition range where the copolymers were essentially amorphous. The extrapolated T_g for the amorphous state of poly(n-octadecyl acrylate), and for amorphous poly(oleyl acrylate), was close to ?111°C. This coincided with a value previously obtained by an extrapolation of data on homologs. Beyond a critical fraction of octadecyl acrylate (0.3 to 0.5), developing side-chain crystallinity in n-octadecyl acrylate raised the glass temperature steadily for all systems, up to a value of 17-C, obtained for the crystalline homopolymer. Crystallinity did not develop in stiff copolymers until T_g was about 30°C below the melting point of the most perfect crystals. In compositionally heterogeneous copolymers incorporating vinyl stearate, blocks of crystalline units appeared to be dispersed in a glassy matrix of amorphous co-units. An empirical equation was derived which fitted the experimental data for random copolymers, over all composition ranges, with fair accuracy.     

Darstellung und Reaktionen von Selenocarbonyldifluorid und seines cyclischen Dimeren 2,2,4,4-Tetrafluor-1,3-diselenetan [l]

Inhaltsübersicht. Das erstmals hergestellte B(SeCF₃)₃ zerfällt unter dem katalytischen Einfluß von Alkalifluoriden zu F₂C=Se und BF₃. In Anwesenheit von BF₃ polymerisiert F₂CSe bereits. bei ?;80°C. Oberhalb 150°C depolymerisiert (F₂CSe)_n wieder zu F₂C=Se und. Durch Halogenaddition an F₂C = Se gewinnt man F₂XCSeX (X = Cl, Br). Das in der Reihe Cl_3–nF_nCSeCl noch fehlende Cl₂FCSeCl wird durch Umsetzung von CSe₂, ClF und Cl₂ synthetisiert. F_nCl_3–nCSeCl (n = 1. 2) liefert mit Zinn die entsprechenden symmetrischen Diselane, mit AgCN die Selenocyanate. Durch Halogenaustausch mit BX₃ (X = Cl, Br) wird umgewandelt. XC(S)Cl reagiert mit Hg(SeCF₃)₂ zu CF₃SeC(S)X (X = F, Cl. CF₃Se). Daraus werden durch Chloraddition die entsprechenden Sulfenylchloride synthetisiert. IR-NMR- und Massenspektren der neu hergestellten Substanzen werden angegeben. Preparation and Reactions of SeCF₂ and its Cyclic Dimer 2,2,4,4-Tetrafluoro-1,3-diselenetane Abstract. B(SeCF₃)₃, prepared for the first time, decomposes under the influence of alkali metal fluorides to F₂C=Se and BF₃. In presence of BF₃, SeCF₂ polymerizes even at ?80°C. Above 150°C (F₂CSe)n depolymerizes to F₂C = Se and Halogen addition to F₂C=Se produces F₂XCSeX (X = Cl, Br). The compound Cl₂FCSeCl could be synthesized by the reaction of CSe₂ with ClF and Cl₂. These selenenylchlorides react with tin producing the corresponding symmetric diselenides whereas with AgCN the selenocyanates are formed. can be transformed to through halogen exchange reaction with BX₃ (X = Cl, Br). XC(S)Cl reacts with Hg(SeCF₃)₂ to give CF₃SeC(S)X (X = F, Cl. CF₃Se), from which the corresponding sulfenylchlorides can be synthesized by chlorine addition. I.r., n.m.r., and mass spectra of the newly prepared compounds are reported.     

Zur Bestimmung der gesamten und freien schwefligen S?ure im Wein

Zusammenfassung Ein Vergleich der Methoden von Weinmann u. Deibner zur Bestimmung der gesamten schwefligen Säure zeigte, daß die letzte Methode zu exakteren Werten führt,vor allem dadurch bedingt, daß das überdestillierte Schwefeldioxyd in einer sauren gekühlten Vorlage aufgefangen wird. Ein Nachteil der Methode ist, daß bei der Titration der Vorlage mit Jodlösung der p_H-Wert mehrfach geändert werden muß. Es gelang uns, diesen Mangel ohne Einbuße an Analysengenauigkeit dadurch zu beseitigen, daß wir als Auffanglösung ein Puffergemisch (p_H 3,5) benutzen und nicht in saurem, sondern in schwach alkalischem Milieu mit Jodlösung titrieren. In dieser Form kann das Verfahren zur Bestimmung der gesamten schwefligen Säure im Wein empfohlen werden.Zur genauen Bestimmung der freien schwefligen Säure arbeiteten wir ein polarographisches Verfahren aus, bei dem im Gegensatz zur jodometrischen Methode die koordinativ gebundene schweflige Säure nicht miterfaßt wird. Der verhältnismäßig große apparative Aufwand bei der Polarographie spricht jedoch gegen die Anwendung dieses Verfahrens in der routinemäßigen Weinanalyse. Es wird deshalb eine vereinfachte, aber recht genaue jodometrische Methode zur Bestimmung der freien schwefligen Säure vorgestellt, die geeignet ist, Aufnahme in die neue Allgemeine Verwaltungsvorschrift für die Untersuchung von Wein und ähnlichen alkoholischen Erzeugnissen sowie von Fruchtsäften zu finden, die an die Stelle der alten Amtlichen Anweisung getreten ist.Für die Untersuchungen wurden Mittel des Bundesernährungsministeriums zur Verfügung gestellt, wofür auch an dieser Stelle bestens gedankt sei.Die Arbeit stellt einen Ausschnitt dar aus der Diplomarbeit von D. Hess: Beitrag zur Bestimmung der schwefligen Säure im Wein (Universität Frankfurt/M. 1957) und der Dissertation von D. Hess: Über den Einfluß von schwefliger Säure und l-Ascorbinsäure bei der Weinbereitung (Frankfurt/M. 1960).     

Zur colorimetrischen Bestimmung der Fusel?le in alkoholischen Destillaten

Ohne Zusammenfassung     

Identification and quantification of the antipsychotics risperidone,aripiprazole, pipamperone and their major metabolites in plasma using ultra‐high performance liquid chromatography–mass spectrometry

The antipsychotics risperidone, aripiprazole and pipamperone are frequently prescribed for the treatment in children with autism. The aim of this study was to validate an ultra‐high performance liquid chromatography–mass spectrometry method for the quantification of these antipsychotics in plasma. An ultra‐high performance liquid chromatography–mass spectrometry assay was developed for the determination of the drugs and metabolites. Gradient elution was performed on a reversed‐phase column with a mobile phase consisting of ammonium acetate, formic acid in methanol or in Milli‐Q ultrapure water at a flow rate of 0.5 mL/min. The method was validated according to the US Food and Drug Administration guidelines. The analytes were found to be stable enough after reconstitution and injection of only 5 μL improved the accuracy and precision in combination with the internal standard. Calibration curves of all five analytes were linear. All analytes were stable for at least 72 h in the autosampler and the high quality control of 9‐OH‐risperidone was stable for 48 h. The method allows quantification of all analytes. The advantage of this method is the combination of a minimal injection volume, a short run‐time, an easy sample preparation method and the ability to quantify all analytes in one run. Copyright © 2015 John Wiley & Sons, Ltd.     

A constructive approach to examination timetabling based on adaptive decomposition and ordering

In this study, we investigate an adaptive decomposition and ordering strategy that automatically divides examinations into difficult and easy sets for constructing an examination timetable. The examinations in the difficult set are considered to be hard to place and hence are listed before the ones in the easy set in the construction process. Moreover, the examinations within each set are ordered using different strategies based on graph colouring heuristics. Initially, the examinations are placed into the easy set. During the construction process, examinations that cannot be scheduled are identified as the ones causing infeasibility and are moved forward in the difficult set to ensure earlier assignment in subsequent attempts. On the other hand, the examinations that can be scheduled remain in the easy set. Within the easy set, a new subset called the boundary set is introduced to accommodate shuffling strategies to change the given ordering of examinations. The proposed approach, which incorporates different ordering and shuffling strategies, is explored on the Carter benchmark problems. The empirical results show that the performance of our algorithm is broadly comparable to existing constructive approaches.