A series of "push-pull" salts substituted with an electron-donating bis(N,N-dimethyl)aniline unit and different electron-withdrawing methyl or chelating pyridinium units have been designed and synthesized from Michler's ketone. The spectroscopic and electronic properties were investigated and compared to their DAST homologues. The studies revealed that a lower HOMO-LUMO gap is obtained in all cases, showing the ability of our donor to increase the "push-pull" effect. Two chromophores with a terpyridine as acceptor end group have also been prepared. 相似文献
TiO2 photocatalysts were prepared by a multi-gelation method and the effect of the changes in the pH during the pH swing times,
i.e., by a controlled pH swing, on the morphology of the TiO2 particles was investigated. The photocatalytic properties of the TiO2 catalysts prepared by controlled pH swing were compared with TiO2 particles prepared without adjusting the pH during the swing times. The photocatalytic degradation reaction of these TiO2 catalysts was investigated by comparing their effectiveness in 2-propanol oxidation. The experimental results showed that
the TiO2 photocatalysts prepared without adjusting the pH performed better in controlling the important parameters of the catalysts
such as particle size, surface area, anatase/rutile phase ratio and pore size, as well as pore volume than the TiO2 photocatalysts prepared by a controlled pH swing method.
Deceased. 相似文献
The bacterial KcsA channel conducts K+ cations at high rates while excluding Na+ cations. Herein, we report an artificial ion‐channel formed by H‐bonded stacks of crown‐ethers, where K+ cation conduction is highly preferred to Na+ cations. The macrocycles aligned along the central pore surround the K+ cations in a similar manner to the water around the hydrated cation, compensating for the energetic cost of their dehydration. In contrast, the Na+ cation does not fit the macrocyclic binding sites, so its dehydration is not completely compensated. The present highly K+‐selective macrocyclic channel may be regarded as a biomimetic of the KcsA channel. 相似文献
The concept of patchy particles is revolutionizing the research field of colloidal assembly, by the design of particles whose surface is purposely patterned to promote attractive interactions with their neighbors in limited number, and in privileged and programmed directions. The idea of magnetic patches makes it possible to imagine assemblies not only spontaneous by simple magnetic coupling but also triggered and canceled at will due to external magnetic fields. This review shows that studies published until now mainly deal with particles with a single magnetic patch, often called Janus particles. The very diverse synthetic routes have been brought together into four main strategies, covering the size range from 100 nm to 100 µm. Their assembly capacity is described both from experimental and simulation viewpoints. The orientation of the magnetic moment of the patch and its decentering extent with respect to the particle are the key parameters for controlling the morphology of clusters, loops, staggered chains, double chains, helices, microtubes, etc. The review offers some perspectives to generalize these studies to multipatch particles, examples of which are still too rare, and to make assemblies sustainable, especially after the removal of the structuring magnetic fields. 相似文献
We report here a novel approach for the extraction and analysis of thyroid hormones (TH) and their metabolites (THM) from human serum samples. Our method features a compact, 96-well micro-titre plate-based pre-analytic extraction/clean-up workflow combined with an isotope dilution LC-MS/MS-MS3 analytical method. In particular, these features make possible the detection of iodothyronines at their endogenous concentrations in serum differing by a factor of ca. 104, with potential to semi-automate the pre-analytics. The method was validated by the assessment of linearity, lower limits of quantification and detection (LLOQ and LLOD respectively), intra- and inter-day accuracy, precision, process efficiency (PE), matrix effect (ME) and relative recovery (RE). Calibration curves were linear in the concentration range in sample matrix from 0.1–250 nM for T3, rT3, T4 and 3-T1AM and from 0.005–1 nM for 3,5-T2 and 3,3′-T2. Using a 200-μL sample volume, the analyte dependant LLOQ were in the range 0.005 (3,5-T2) to 0.25 (T4) nM and LLOD were between 0.002 (3,5-T2) and 0.052 nM (T4). We applied the LC-MS/MS-MS3 method to the analysis of a cross section of patients with disorders of the thyroid hormone axis. T4, T3 and rT3 concentrations (± standard deviation) were 120 ± 18, 1.9 ± 0.4 and 0.45 ± 0.09 nM respectively. 3,3′-T2 concentrations (± standard deviation) were 0.079 ± 0.022 nM; 3,5-T2 concentrations were below the LLOQ and/or LLOD in all but a single sample (0.013 nM). This method expands the analytical spectrum to endogenous thyroid hormone metabolites such as 3,5-T2 which exert biological actions and rT3 which may act as surrogate markers for disturbed thyroid hormone metabolism.
The synthesis of a range of imidazolinium salts derived from acyclic 1,2-diamines, and an evaluation of the reactivity and asymmetric induction of the corresponding NHCs as catalysts for the asymmetric synthesis of β-lactams, is reported. An N-methyl-substituted NHC derived from (1R,2R)-1,2-diphenylethanediamine shows optimal reactivity and enantioselectivity in this series, in contrast to that observed with NHCs derived from (1R,2R)-cyclohexane-1,2-diamine. 相似文献
The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO2 and NOX removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and treatment of effluent from petroleum production units and liquid irradiation process to treat vessel water ballast. On the other hand, there is a growing need of mobile EB facilities for different applications in South America. 相似文献