Ionic Liquid Modified Single‐use Electrode Developed for Voltammetric Detection of miRNA‐34a and its Application to Real Samples

The ionic liquid (IL) modified chemically activated (CA) pencil graphite electrodes (PGEs) were developed for label‐free voltammetric detection of miRNA‐34a, and implemented to the real samples. Firstly, the electrochemical characterization of unmodified PGE, CA‐PGE, IL‐PGE and IL‐CA‐PGE was performed by cyclic voltammetry (CV) as well as their DNA binding capacity was studied by electrochemical impedance spectroscopy (EIS) technique. The microscopic characterization of the surface of each electrodes was investigated by scanning electron microscopy (SEM). Differential pulse voltammetry (DPV) technique was used for measuring the oxidation signal of guanine in order to perform a label‐free voltammetric monitoring of a full‐match hybridization specific to miRNA‐34a. The selectivity of biosensor was tested against to miRNA‐155, miRNA‐660 as well as to the mismatch sequence of miRNA‐34a. The further selectivity of this proposed biosensor was studied in the mixture of samples containing miRNA‐34a with other miRNAs (1 : 1). The voltammetric detection of miRNA‐34a was also explored in the artificial serum medium as fetal bovine serum (FBS) and also in total RNA samples isolated from HUH‐7 human hepatocellular carcinoma cell line.     

Effect of cationic surfactant adsorption on the rheological and surface properties of bentonite dispersions

In this study, the adsorption, bridging, and intercalation effects of a cationic surfactant, benzyldimethyltetradecyl ammonium chloride (BDTDACl), on bentonite clay suspensions was investigated. The adsorption, rheological behaviors, and colloidal properties of the clay dispersions were determined as a function surfactant concentration. Adsorption isotherms were obtained using the batch-equilibrium technique. The rheological behavior of the clay suspensions was obtained by shear stress-shear rate measurements within 0-350 s-1 shear rates. The structure of the composite particles was analyzed by using X-ray diffraction analysis and it was found that the expansions of basal d-spacings are less than 16.80 A, suggesting a monolayer structure.     

Spectrofluorimetric Determination of Aflatoxin B1 in Winter Herbal Teas via Magnetic Solid Phase Extraction Method by using Metal–Organic Framework (MOF) Hybrid Structures Anchored with Magnetic Nanoparticles

MIL53(Al)-SiO₂@Fe₃O₄ composite was prepared by co-precipitation route with a typical Stöber synthetic process and ultrasonic-agitation, then subsequently utilized as a multi-component novel sorbent in solid-phase microextraction (SPME) of aflatoxin B1 in winter herbal teas. Microstructural properties of MIL53(Al)-SiO₂@Fe₃O₄ composite was characterized by using Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) methods, and Brunauer–Emmett–Teller (BET) surface area measurement. The MIL53(Al)-SiO₂@Fe₃O₄ composite was found to be a very effective sorbent in spectrofluorimetric determination of aflatoxin B1 (AFB1) in winter herbal teas via magnetic solid-phase extraction (SPE) route. The proposed method showed a wide linear range from 0.5 to 150 ng/ml, low limit of detection (LOD = 0.5 ng/ml), and an acceptable recovery values (70.7–96.5%) in real samples analysis. This study shows that the suggested method possesses an important potential to use for detecting AFB1 in quality control laboratories.     

Degradation of substituted phenols with different oxygen sources catalyzed by Co(II) and Cu(II) phthalocyanine complexes

Research on substituted phenol degradations has received substantial attention. In this work, effective Co(II) and Cu(II) phthalocyanine complexes as catalysts were studied to degrade toxic phenols to harmless products. The effect of various process parameters, such as initial concentration of phenol, catalyst, oxygen sources, and temperature on the degradation reaction was investigated to achieve maximum degradation efficiency. The catalytic activities of Co(II) and Cu(II) phthalocyanines were evaluated for oxidation of phenolic compounds such as p-nitrophenol, o-chlorophenol, 2,3-dichlorophenol, and m-methoxyphenol. Co(II) phthalocyanine displayed good catalytic performance in degradation of 2,3-dichlorophenol to 2,3-dichlorobenzaldehyde and 2,3-dichloro-1,4-benzoquinone with the highest TON and TOF values within 3?h at 50?°C. The fate of catalyst during the degradation process was followed by UV–Vis spectroscopy.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Reversibly reducible cis-dichloroplatinum(II) and cis-dichloropalladium(II) complexes of bis(1-methylimidazol-2-yl)glyoxal

Complexes cis-MCl2(big), big=bis(1-methylimidazol-2-yl)glyoxal, M=Pt, Pd, were prepared and characterized through electrochemistry, spectroscopy, and for M=Pt, by X-ray structure analysis. The seven-membered chelate ring formed through N,N' coordination of the ligand big shows a boat conformation in agreement with density functional theory (DFT) calculation results. No significant intermolecular interactions were observed for the platinum compound. Both the PdII and PtII complexes undergo reversible one-electron reduction in CH2Cl2/ 0.1 M Bu4NPF6; the reduced palladium compound disintegrates above -30 degrees C. Electron paramagnetic resonance (EPR), UV-vis, and IR spectroelectrochemistry studies were employed to study the monoanions. The anion radical complex [cis-PtCl2(big)]*- exhibits a well-resolved EPR spectrum with small but well-detectable g anisotropy and an isotropic 195Pt hyperfine coupling of 12.2 G. DFT calculations confirm the spin concentration in the alpha-semidione part of the radical complex with small delocalization to the bis(imidazolyl)metal section. The results show that EPR and electroactive moieties can be linked to the cis-dichloroplatinum(II) group via imidazole coordination.     

Supramolecular Coordination of Pb2+ Defects in Hybrid Lead Halide Perovskite Films Using Truxene Derivatives as Lewis Base Interlayers

Truxene derivatives, due to their molecular structure and properties, are good candidates for the passivation of defects when deposited onto hybrid lead halide perovskite thin films. Moreover, their semiconductor characteristics can be tailored through the modification of their chemical structure, which allows-upon light irradiation- the interfacial charge transfer between the perovskite film and the truxene molecules. In this work, we analysed the use of the molecules as surface passivation agents and their use in complete functional solar cells. We observed that these molecules reduce the non-radiative carrier recombination dynamics in the perovskite thin film through the supramolecular complex formation between the Truxene molecule and the Pb²⁺ defects at the perovskite surface. Interestingly, this supramolecular complexation neither affect the carrier recombination kinetics nor the carriers collection but induced noticeable hysteresis on the photocurrent vs voltage curves of the solar cells under 1 sun illumination.     

Influences of Electrolytes, Polymers and a Surfactant on Rheological Properties of Bentonite–Water Systems

Characteristic rheological properties, such as viscosity, shear stress, yield point, gel strength and thixotropy, of natural Ca- bentonite and Na-peptized bentonite were studied after adding LiCl, KCl, CaCl2, MgCl2·6H2O electrolytes; (NaPO3)n, polyvinyl pyrolidone (PVP) polymers and an anionic surfactant (linear alkyl benzene sulphonate, LABS). Changes in flow properties under the influence of various additives at different quantities were investigated in these slurries. The experimental results are discussed in terms of bentonite forms, types and concentrations of additives and influence of exchangeable cations. Bivalent and monovalent cations display entirely different rheological properties in two groups of muds. Furthermore, the difference in the degree of activity of PVP polymer on the viscosity of two mud systems depend on the clay mineral structure. The slurry prepared with Na-bentonite contains a minimum number of tactoids and a maximum number of sheet-bearing clay particles, which reduces the surface area of the clay minerals and increases viscosity by adding PVP polymer.     

Comparison of separation performance of polysaccaride-based chiral stationary phases in enantioseparation of 1-(4-chlorobenzhydryl)piperazine benzamide derivatives by HPLC

Analytical high-performance liquid chromatographic enantioseparation of 1-(4-chlorobenzhydryl) piperazine benzamide derivatives was accomplished on different chiral stationary phases. The enantiomers of the compounds were resolved by normal-phase chromatography on silica-based amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD-H), cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD-H) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) columns with mobile phases consisting of mixtures of n-hexane and ethanol in different proportions (90: 10, 80: 20). The mobile phase and the chiral stationary phase were varied to achieve the best resolution. The effect of the concentration of ethanol in the mobile phase was studied. The resolution obtained on the three columns was significant.     

Quasielastic scattering by dilute polymer solutions

The scattering law S( k ,w) for dilute polymer solutions is obtained from Kirkwood's diffusion equation via the projection operator technique. The width Ω(k) of S( k ,w) is obtained for all k without replacing the Oseen tensor by its average (as is done in the Rouse–Zimm model) using the “spring-bead” model ignoring memory effects. For small (ka\documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt N $ \end{document} ? 1) and large (ka ? 1) values of k we find Ω = 0.195 k²/β α η₀ \documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt N $ \end{document} and Ω = k²/βξ, respectively, indicating that the width is governed mainly by the viscosity η₀ for small k values and by the friction coefficient ξ for large k values. For intermediate k values which are of importance in neutron scattering we find that in the Rouse limit Ω = k⁴a²/12βξ. When the hydrodynamic effects are included, Ω(k) becomes 0.055 k³/βη₀. Using the Rouse–Zimm model, it is seen that the effect of pre-averaging the Oseen tensor is to underestimate the half-width Ω(k). The implications of the theoretical predictions for scattering experiments are discussed.