A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).     

Heavy metal contamination in street dusts of Istanbul (Pendik to Levent) E-5 highway

Street dust composition is an important environmental parameter that should be considered in investigations of environmental pollution originating from traffic. In this study, fifty-six samples of street dusts were collected during the period December 2003-April 2004 from Pendik to Levent on E-5 highway in Istanbul, Turkey. Analyses were determined by graphite furnace atomic absorption spectrometry after digestion using USEPA, 1996 (Method 3050B). The mean concentration levels of Pb, Mn, Zn, Ni, Cd and Cu were found to be 368.3, 747.8, 431.2, 27.1, 0.3 and 191.1 microg/g respectively. Pb, Cu, Zn and Mn mean concentrations in studied areas were higher than levels of these heavy metals according to USEPA (1992) and Republic of Turkey Ministry of Environment and Foresty (2003). Highly significant correlations except for Mn were found between the number of vehicles and heavy metal concentrations.     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204     

Phthalocyanine-based fluorescent chemosensor for the sensing of Zn (II) in dimethyl sulfoxide-acetonitrile

A tetra-substituted phthalocyanine based on 4-[2-(4-nitrophenoxy)ethoxy]phthalonitrile carrying nitrophenyl group for the sensing of Zn²⁺ has been prepared and characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, and MS spectral data. The sensing of Zn²⁺ is based on the fluorescence quenching of Pc. Both absorbance and fluorescence spectra of ZnPc exhibit distinct changes in visible region in response to treatment with Zn²⁺ ion in dimethyl sulfoxide. The fluorescence spectrum of the ligand showed quenching in the intensity of the signal at 688?nm for Zn²⁺. The complex composition of ZnPc was found 1:1 by means of spectrophotometric and spectrofluorimetric titration data. The spectrofluorimetric method showed good sensitivity for Zn²⁺ with linear range and detection limit of 4.0?×?10^?6–4.4?×?10^?5 and 2.4×10^?7?M, respectively.     

Multiwalled Carbon Nanotubes‐Chitosan Modified Single‐Use Biosensors for Electrochemical Monitoring of Drug‐DNA Interactions

A multiwalled carbon nanotubes (CNT)‐chitosan (CHIT) modified pencil graphite electrode (CNT‐CHIT/PGE) was developed for the first time herein for electrochemical monitoring of the interaction of an anticancer drug, mitomycin C (MC) and DNA. The characterization of unmodified PGE, CHIT/PGE, CNT/PGE and CHIT‐CNT/PGE were performed by scanning electron microscopy and cyclic voltammetry techniques. The oxidation signals of MC and guanine were measured before and after interaction at the surface of CNT‐CHIT/PGEs using differential pulse voltammetry. Electrochemical impedance spectroscopy technique was also successfully utilized for monitoring of the interaction process at the surface of CNT‐CHIT/PGEs in different interaction times.     

Electrochemical Determination of Homocysteine at Disposable Graphite Electrodes

In the case of disruption of Hcy metabolism, the blood level of Hcy increases and it causes particularly the cardiovascular diseases, cancer, dementia and Parkinson’s disease. Thus, the sensitive analysis of Hcy levels in biological fluids is very important. Hcy analysis was performed herein using very practical and cost‐effective protocol using differential pulse voltammetry and graphite electrode. Detection limit of Hcy was found to be 1.21 µM in the linear range from 2 µM to 20 µM. The electrochemical Hcy detection in artificial urine medium was also successfully performed even in the presence of L ‐Cysteine, L ‐Methionine and Glutathione.     

Supramolecular Coordination of Pb2+ Defects in Hybrid Lead Halide Perovskite Films Using Truxene Derivatives as Lewis Base Interlayers

Truxene derivatives, due to their molecular structure and properties, are good candidates for the passivation of defects when deposited onto hybrid lead halide perovskite thin films. Moreover, their semiconductor characteristics can be tailored through the modification of their chemical structure, which allows-upon light irradiation- the interfacial charge transfer between the perovskite film and the truxene molecules. In this work, we analysed the use of the molecules as surface passivation agents and their use in complete functional solar cells. We observed that these molecules reduce the non-radiative carrier recombination dynamics in the perovskite thin film through the supramolecular complex formation between the Truxene molecule and the Pb²⁺ defects at the perovskite surface. Interestingly, this supramolecular complexation neither affect the carrier recombination kinetics nor the carriers collection but induced noticeable hysteresis on the photocurrent vs voltage curves of the solar cells under 1 sun illumination.     

Comparison of separation performance of polysaccaride-based chiral stationary phases in enantioseparation of 1-(4-chlorobenzhydryl)piperazine benzamide derivatives by HPLC

Analytical high-performance liquid chromatographic enantioseparation of 1-(4-chlorobenzhydryl) piperazine benzamide derivatives was accomplished on different chiral stationary phases. The enantiomers of the compounds were resolved by normal-phase chromatography on silica-based amylose tris(3,5-dimethylphenylcarbamate) (Chiralpak AD-H), cellulose tris(3,5-dimethylphenylcarbamate) (Chiralcel OD-H) and cellulose tris(4-methylbenzoate) (Chiralcel OJ) columns with mobile phases consisting of mixtures of n-hexane and ethanol in different proportions (90: 10, 80: 20). The mobile phase and the chiral stationary phase were varied to achieve the best resolution. The effect of the concentration of ethanol in the mobile phase was studied. The resolution obtained on the three columns was significant.     

Reversibly reducible cis-dichloroplatinum(II) and cis-dichloropalladium(II) complexes of bis(1-methylimidazol-2-yl)glyoxal

Complexes cis-MCl2(big), big=bis(1-methylimidazol-2-yl)glyoxal, M=Pt, Pd, were prepared and characterized through electrochemistry, spectroscopy, and for M=Pt, by X-ray structure analysis. The seven-membered chelate ring formed through N,N' coordination of the ligand big shows a boat conformation in agreement with density functional theory (DFT) calculation results. No significant intermolecular interactions were observed for the platinum compound. Both the PdII and PtII complexes undergo reversible one-electron reduction in CH2Cl2/ 0.1 M Bu4NPF6; the reduced palladium compound disintegrates above -30 degrees C. Electron paramagnetic resonance (EPR), UV-vis, and IR spectroelectrochemistry studies were employed to study the monoanions. The anion radical complex [cis-PtCl2(big)]*- exhibits a well-resolved EPR spectrum with small but well-detectable g anisotropy and an isotropic 195Pt hyperfine coupling of 12.2 G. DFT calculations confirm the spin concentration in the alpha-semidione part of the radical complex with small delocalization to the bis(imidazolyl)metal section. The results show that EPR and electroactive moieties can be linked to the cis-dichloroplatinum(II) group via imidazole coordination.     

Influences of Electrolytes, Polymers and a Surfactant on Rheological Properties of Bentonite–Water Systems

Characteristic rheological properties, such as viscosity, shear stress, yield point, gel strength and thixotropy, of natural Ca- bentonite and Na-peptized bentonite were studied after adding LiCl, KCl, CaCl2, MgCl2·6H2O electrolytes; (NaPO3)n, polyvinyl pyrolidone (PVP) polymers and an anionic surfactant (linear alkyl benzene sulphonate, LABS). Changes in flow properties under the influence of various additives at different quantities were investigated in these slurries. The experimental results are discussed in terms of bentonite forms, types and concentrations of additives and influence of exchangeable cations. Bivalent and monovalent cations display entirely different rheological properties in two groups of muds. Furthermore, the difference in the degree of activity of PVP polymer on the viscosity of two mud systems depend on the clay mineral structure. The slurry prepared with Na-bentonite contains a minimum number of tactoids and a maximum number of sheet-bearing clay particles, which reduces the surface area of the clay minerals and increases viscosity by adding PVP polymer.