Electrochemistry of Cobalta Bis(dicarbollide) Ions Substituted at Carbon Atoms with Hydrophilic Alkylhydroxy and Carboxy Groups

In this study we explore the effect on the electrochemical signals in aqueous buffers of the presence of hydrophilic alkylhydroxy and carboxy groups on the carbon atoms of cobalta bis(dicarbollide) ions. The oxygen-containing exo-skeletal substituents of cobalta bis(dicarbollide) ions belong to the perspective building blocks that are considered for bioconjugation. Carbon substitution provides wider versatility and applicability in terms of the flexibility of possible chemical pathways. However, until recently, the electrochemistry of compounds substituted only on boron atoms could be studied, due to the unavailability of carbon-substituted congeners. In the present study, electrochemistry in aqueous phosphate buffers is considered along with the dependence of electrochemical response on pH and concentration. The compounds used show electrochemical signals around −1.3 and +1.1 V of similar or slightly higher intensities than in the parent cobalta bis(dicarbollide) ion. The signals at positive electrochemical potential correspond to irreversible oxidation of the boron cage (the C2B9 building block) and at negative potential correspond to the reversible redox process of (CoIII/CoII) at the central atom. Although the first signal is typically sharp and its potential can be altered by a number of substituents, the second signal is complex and is composed of three overlapping peaks. This signal shows sigmoidal character at higher concentrations and may be used as a diagnostic tool for aggregation in solution. Surprisingly enough, the observed effects of the site of substitution (boron or carbon) and between individual groups on the electrochemical response were insignificant. Therefore, the substitutions would preserve promising properties of the parent cage for redox labelling, but would not allow for the further tuning of signal position in the electrochemical window.     

New type of tetrazine‐substituted metallophthalocyanines by microwave irradiation: Synthesis and characterization

5,6‐bis(4‐methylphenyl)‐2,3‐dihydro‐1,2,3,4‐tetrazine 2 was synthesized by the dimerization of ethyl p‐methylbenzoateformylhydrazone 1 in hydrazinehydrate solution. 2,3‐bis(4‐methylphenyl)‐6,7,14,15‐tetrahydro[1,2,3,4]tetrazino [2,3d][1,8, 4,5]benzodithia‐diazecine‐10,11‐dicarbonitrile 4 was sythesized by cyclization reaction of tetrazine monomer 2 onto 1,2‐bis‐(2‐iodoethylmercapto)‐4,5‐dicyanobenzene 3 . Co(II) and Cu(II) phthalocyanine complexes were prepared by reaction of the dinitrile compound ( 4 ) with the chlorides of Co(II), Cu(II), and DMAE at 175°C, 350 W in a microwave oven for 10 min. Zn(II)‐phthalocyanine complex was prepared by reaction of the dinitrile compound 4 with the acetate of Zn(II) and DMAE at 175°C, 350 W in a microwave oven for 10 min. The new compounds were characterized by a combination of IR, ¹H‐NMR, ¹³C NMR, UV‐vis, elemental analysis, and MS spectral data. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:456–461, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20623     

Phthalocyanine-based fluorescent chemosensor for the sensing of Zn (II) in dimethyl sulfoxide-acetonitrile

A tetra-substituted phthalocyanine based on 4-[2-(4-nitrophenoxy)ethoxy]phthalonitrile carrying nitrophenyl group for the sensing of Zn²⁺ has been prepared and characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR, and MS spectral data. The sensing of Zn²⁺ is based on the fluorescence quenching of Pc. Both absorbance and fluorescence spectra of ZnPc exhibit distinct changes in visible region in response to treatment with Zn²⁺ ion in dimethyl sulfoxide. The fluorescence spectrum of the ligand showed quenching in the intensity of the signal at 688?nm for Zn²⁺. The complex composition of ZnPc was found 1:1 by means of spectrophotometric and spectrofluorimetric titration data. The spectrofluorimetric method showed good sensitivity for Zn²⁺ with linear range and detection limit of 4.0?×?10^?6–4.4?×?10^?5 and 2.4×10^?7?M, respectively.     

Electrochemical Determination of Homocysteine at Disposable Graphite Electrodes

In the case of disruption of Hcy metabolism, the blood level of Hcy increases and it causes particularly the cardiovascular diseases, cancer, dementia and Parkinson’s disease. Thus, the sensitive analysis of Hcy levels in biological fluids is very important. Hcy analysis was performed herein using very practical and cost‐effective protocol using differential pulse voltammetry and graphite electrode. Detection limit of Hcy was found to be 1.21 µM in the linear range from 2 µM to 20 µM. The electrochemical Hcy detection in artificial urine medium was also successfully performed even in the presence of L ‐Cysteine, L ‐Methionine and Glutathione.     

Multiwalled Carbon Nanotubes‐Chitosan Modified Single‐Use Biosensors for Electrochemical Monitoring of Drug‐DNA Interactions

A multiwalled carbon nanotubes (CNT)‐chitosan (CHIT) modified pencil graphite electrode (CNT‐CHIT/PGE) was developed for the first time herein for electrochemical monitoring of the interaction of an anticancer drug, mitomycin C (MC) and DNA. The characterization of unmodified PGE, CHIT/PGE, CNT/PGE and CHIT‐CNT/PGE were performed by scanning electron microscopy and cyclic voltammetry techniques. The oxidation signals of MC and guanine were measured before and after interaction at the surface of CNT‐CHIT/PGEs using differential pulse voltammetry. Electrochemical impedance spectroscopy technique was also successfully utilized for monitoring of the interaction process at the surface of CNT‐CHIT/PGEs in different interaction times.     

Probing mixed valence in a new tppz-bridged diruthenium(III,II) complex {(mu-tppz)[Ru(bik)Cl]2}3+ (tppz=2,3,5,6-tetrakis(2-pyridyl)pyrazine, bik=2,2'-bis(1-methylimidazolyl)ketone): EPR silence, intervalence absorption, and nu(CO) line broadening

The complex dication of the diruthenium(II) compound {(mu-tppz)[Ru(bik)Cl]2}(ClO4)2 can be oxidized and reduced in two one-electron steps each. In CH3CN/0.1 M Bu4NPF6, the odd-electron intermediates{(mu-tppz)[Ru(bik)Cl]2}n+, n=1 and 3, have comproportionation constants of 7x10(8) and 1x10(5), respectively. Both exhibit near-infrared absorptions, in the case of n=3 the 1640 nm band (epsilon=1200 M-1 cm-1, Deltanu1/2=1560 cm-1) is attributed to an intervalence charge-transfer transition. While the mixed-valent intermediate (n=3) is EPR silent even at 4 K, the n=1 form shows g(parallel) 2.005 and g( perpendicular) 1.994 at that temperature, signifying a diruthenium(II) complex of the tppz*- radical anion. The variation of energy and intensity of nuCO and of the ring vibration band around 1590 cm-1 has been monitored not only for {(mu-tppz)[Ru(bik)Cl]2}n+, n=0-4, but also for the mononuclear {(tppz)Ru(bik)Cl}n+, n=0-2. In the dinuclear complex the carbonyl stretching bands of the spectator ligand bik are shifted by about 15 cm-1 on each one-electron-transfer step, increasing with the positive charge. The mixed-valent {(mu-tppz)[Ru(bik)Cl]2}3+ shows a perceptibly broader nuCO band, suggesting incomplete valence averaging (partial localization).     

Heavy metal contamination in street dusts of Istanbul (Pendik to Levent) E-5 highway

Street dust composition is an important environmental parameter that should be considered in investigations of environmental pollution originating from traffic. In this study, fifty-six samples of street dusts were collected during the period December 2003-April 2004 from Pendik to Levent on E-5 highway in Istanbul, Turkey. Analyses were determined by graphite furnace atomic absorption spectrometry after digestion using USEPA, 1996 (Method 3050B). The mean concentration levels of Pb, Mn, Zn, Ni, Cd and Cu were found to be 368.3, 747.8, 431.2, 27.1, 0.3 and 191.1 microg/g respectively. Pb, Cu, Zn and Mn mean concentrations in studied areas were higher than levels of these heavy metals according to USEPA (1992) and Republic of Turkey Ministry of Environment and Foresty (2003). Highly significant correlations except for Mn were found between the number of vehicles and heavy metal concentrations.     

A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).     

Accelerated screening of phage-display output with alkaline phosphatase fusions

When using multiple targets and libraries, selection of affinity reagents from phage-displayed libraries is a relatively time-consuming process. Herein, we describe an automation-amenable approach to accelerate the process by using alkaline phosphatase (AP) fusion proteins in place of the phage ELISA screening and subsequent confirmation steps with purified protein. After two or three rounds of affinity selection, the open reading frames that encode the affinity selected molecules (i.e., antibody fragments, engineered scaffold proteins, combinatorial peptides) are amplified from the phage or phagemid DNA molecules by PCR and cloned en masse by a Ligation Independent Cloning (LIC) method into a plasmid encoding a highly active variant of E. coli AP. This time-saving process identifies affinity reagents that work out of context of the phage and that can be used in various downstream enzyme linked binding assays. The utility of this approach was demonstrated by analyzing single-chain antibodies (scFvs), engineered fibronectin type III domains (FN3), and combinatorial peptides that were selected for binding to the Epsin N-terminal Homology (ENTH) domain of epsin 1, the c-Src SH3 domain, and the appendage domain of the gamma subunit of the clathrin adaptor complex, AP-1, respectively.