On wave radiation induced by a fast shock wave in an oblique magnetic field

The corrugation stability of the flat surface of a fast magnetohydrodynamic shock wave in a perfect monoatomic gas with a constant heat capacity is studied with numerical techniques. The magnetic field makes an arbitrary angle with the plane of discontinuity. It is shown that the shock wave remains stable only if it is strictly perpendicular to the magnetic field. At any other angle between the fast shock wave and magnetic field, the former may spontaneously radiate outwardly propagating magnetohydrodynamic waves under certain conditions. Incoming flow characteristics at which these waves are induced are determined.     

Investigation and modelling of damping in a plate with a bonded porous layer

Behavior of a poro-elastic material bonded onto a vibrating plate is investigated in the low-frequency range. From the analysis of dissipation mechanisms, a model accounting for damping added by the porous layer on the plate is derived. This analysis is based on a 3-D finite element formulation including poro-elastic elements based on Biot displacement theory. First, dissipated powers related to thermal, viscous and viscoelastic dissipation are explicited. Then a generic configuration (simply-supported aluminium plate with a bonded porous layer and mechanical excitation) is studied. Thermal dissipation is found negligible. Viscous dissipation can be optimized as a function of airflow resistivity. It can be the major phenomenon within soft materials, but for most foams viscoelastic dissipation is dominant. Consequently an equivalent plate model is proposed. It includes shear in the porous layer and only viscoelasticity of the skeleton. Excellent agreement is found with the full numerical model.     

Two scenarios for phase-transformation in disordered media

The reasons for the existence of various scenarios for structural transformations in disordered condensed media, such as liquids and amorphous substances, where both smeared transformations and sharp first-order transitions may occur, were analyzed. The ratio between the spatial scale of structural correlations and the size of the smallest possible region occupied by a new phase in the matrix of initial modification is the key parameter determining the scenario for equilibrium phase transformations in liquids. In amorphous substances, the experimentally observed transformations occur far from equilibrium, and the possible size of the region occupied by the new phase corresponds to the minimal nucleus size. For some amorphous solids, quantitative analysis of the transformation width was carried out and the main classes of covalent substances, in which the smeared or sharp transitions occur, were revealed. Specific features of the interparticle interactions determining various transformation scenarios are discussed.     

Uniformity in radon exhalation from construction materials using can technique

The uniformity in radon exhalation rates for 46 tiles of granite, marble and ceramic used as construction materials were determined using “Can Technique” employing CR-39 nuclear track detectors (NTDs). On each tile, two sealed cans, each enclosing one NTD fixed at the center of the tile surface area covered by the can, were mounted at two different locations of each individual tiles. The track production rates on the NTDs representing radon exhalation rates were measured. The radon exhalation rates from the surface of individual tiles showed uniform exhalations within the calculated uncertainties of the measured values. This makes Can Technique an alternative simple method to measure radon exhalation rates. Calibration required to convert track production rates into radon exhalation rates for the used can and NTD was done using an active technique. The correlation between the measurements by the two techniques shows a good linear correlation coefficient (0.83).     

Preparation and properties of homogeneous V2O5-SiO2 xerogel composite based on interpenetrating polymer network

In this paper, we report the conducting and electrochemical properties of a homogeneous V₂O₅-SiO₂ xerogel composite obtained from the simultaneous polymerization in both inorganic components (Si-O and V-O based polymers) forming an interpenetrating polymer network, where a mutual “solubility” due to cross-links and entanglements was observed. The presence of V₂O₅ inside the silica matrix has a strong effect on electrical conductivity; measurements showed room temperature conductivity almost 1000 times higher than what is found in the literature. In addition, the electrochemical behavior is quite similar to that found in V₂O₅ xerogel. Moreover, the effects of thermal treatment on the conducting and electrochemical properties were investigated. It was found that both properties were improved with no significant effect on V₂O₅ xerogel layered structure.     

Experimental evidence for anisotropic response of a driven vortex lattice

We present kinetic inductance measurements in current driven Josephson junction arrays. Measurements performed with circular coils indicate that this technique is very sensitive to the vortex mobility. Results obtained with anisotropic detection coils provide experimental evidence for the anisotropic response of a driven vortex lattice. Anisotropic behavior is obtained when rising the temperature or the mean vortex velocity as indicated by the loss of the superconducting shielding capability, first in the direction of vortex motion and then in the perpendicular direction.