Structure and reflective properties of Al-Cu-Fe quasicrystalline thin film prepared by laser induced arc method

Al-Cu-Fe thin films were prepared by laser induced arc (laser-arc) method from a single source—Al₆₃Cu₂₅Fe₁₂ alloy, which was proved to consist of quasicrystalline phase together with approximant phase. The composition of the deposited films meets the requirement for formation of icosahedral symmetry phase. Quasicrystalline phase was obtained after annealing the amorphous as-deposit film samples. The optical properties of the samples were investigated. Thin film samples of Al, Cu and Fe deposited under the same condition were employed for comparison. The results showed specific reflective properties of Al-Cu-Fe quasicrystal thin film in some wavelength range. The optical conductivity of the films exhibited a negative peak, centered about 440 nm in range of 190 to 800 nm. The Al-Cu-Fe quasicrystal thin films could absorb almost all the ray in the wavelength range from 420nm to 450 nm. The ratio of absorption was greater than 99%.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

<Emphasis Type="Italic">L</Emphasis><Subscript>1</Subscript> linear interpolator for missing values in time series

We propose a minimum mean absolute error linear interpolator (MMAELI), based on theL ₁ approach. A linear functional of the observed time series due to non-normal innovations is derived. The solution equation for the coefficients of this linear functional is established in terms of the innovation series. It is found that information implied in the innovation series is useful for the interpolation of missing values. The MMAELIs of the AR(1) model with innovations following mixed normal andt distributions are studied in detail. The MMAELI also approximates the minimum mean squared error linear interpolator (MMSELI) well in mean squared error but outperforms the MMSELI in mean absolute error. An application to a real series is presented. Extensions to the general ARMA model and other time series models are discussed. This research was supported by a CityU Research Grant and Natural Science Foundation of China.     

Adsorption of argon and nitrogen in cylindrical pores of MCM-41 materials: application of density functional theory

Adsorption of argon and nitrogen at their respective boiling points in cylindrical pores of MCM-41 type silica-like adsorbents is studied by means of a non-local density functional theory (NLDFT), which is modified to deal with amorphous solids. By matching the theoretical results of the pore filling pressure versus pore diameter against the experimental data, we arrive at a conclusion that the adsorption branch (rather than desorption) corresponds to the true thermodynamic equilibrium. If this is accepted, we derive the optimal values for the solid-fluid molecular parameters for the system amorphous silica-Ar and amorphous silica-N₂, and at the same time we could derive reliably the specific surface area of non-porous and mesoporous silica-like adsorbents, without a recourse to the BET method. This method is then logically extended to describe the local adsorption isotherms of argon and nitrogen in silica-like pores, which are then used as the bases (kernel) to determine the pore size distribution. We test this with a number of adsorption isotherms on the MCM-41 samples, and the results are quite realistic and in excellent agreement with the XRD results, justifying the approach adopted in this paper.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

The components of the Wired Spanning Forest are recurrent

 We show that a.s. all of the connected components of the Wired Spanning Forest are recurrent, proving a conjecture of Benjamini, Lyons, Peres and Schramm. Our analysis relies on a simple martingale involving the effective conductance between the endpoints of an edge in a uniform spanning tree. We believe that this martingale is of independent interest and will find further applications in the study of uniform spanning trees and forests. Received: 20 April 2001 / Revised version: 23 July 2002 / Published online: 14 November     

Non-existence of phase transition of oriented percolation on Sierpinski carpet lattices

 A percolation problem on Sierpinski carpet lattices is considered. It is obtained that the critical probability of oriented percolation is equal to 1. In contrast it was already shown that the critical probability p _c of percolation is strictly less than 1 in Kumagai [9]. This result shows a difference between fractal-like lattice and ℤ ^d lattice. Received: 15 May 2002 / Revised version: 11 October 2002 / Published online: 21 February 2003 Mathematics Subject Classification (2000): Primary: 60K35, 82B43; Secondary: 82B26     

Local effect of electric and magnetic fields on the position of an attached shock in a supersonic diffuser

Effective ways for controlling shock wave configurations by means of external actions are sought. One such way is a local effect of electric and magnetic fields. In this paper, the local effect of external fields is implemented by current localization in a limited region of a diffuser. The experiment is carried out in a diffuser providing the complete internal compression of the gas with a Mach number at the inlet M=4.3. As a working medium, a xenon plasma is used. The plasma flow is formed in a shock tube equipped with an accelerating nozzle. Two ways of current localization are tested. In the first one, the diffuser inlet is a short channel of Faraday generator type. In this case, the ponderomotive force basically decelerates or accelerates the flow depending on the direction of the electric field. In the second way, the current flows through a narrow near-wall region between adjacent electrodes. In this case, the ponderomotive force compresses or expands the gas. In both cases, it is shown that the angle of an attached shock due to MHD interaction can be both decreased and increased. The central problem with the MHD control of shock waves is near-electrode and near-wall phenomena.     

一种基于代价函数和模糊熵的图像分割方法

提出了一种基于代价函数和模糊熵的图像分割方法.该方法先用代价函数最小化法对退化的图像作预处理,之后,利用模糊熵作进一步的处理.实验结果表明:新方法和一般的阈值分割方法相比,不但分割图像的错分率较小,而且图像的视觉效果也有较大的改善.