Novel,Recyclable, and Thermally Stable Task-Specific Ionic Liquid (TBA Acetate) Medium/Catalyst for the Synthesis of Indolylidinecyclic-1,3- and -1,4-diketones

A simple and efficient synthesis of indolylidinethiazolidnediones (3) and indolylidinecyclic-1,3-diketones (5) has been developed by reaction of indole-3-aldehyde (1) with thiazolidinedione (2) or cyclic-1,3-diketones (4) using tetra butyl ammonium acetate (TBAA) melt as novel, cost-effective, and recyclable ionic liquid under solvent-free green conditions at 100 °C for 15–20 min without additional use of catalyst.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Detection and identification of alkylphosphonic acids by positive electrospray ionization tandem mass spectrometry using a tricationic reagent

The retrospective detection and identification of degradation products of chemical warfare agents are of immense importance in order to prove their spillage and use. A highly sensitive liquid chromatography/electrospray ionization tandem mass spectrometric (LC/ESI-MS/MS) method--using an imidazolium-based tricationic reagent--was developed for the detection and identification of the anionic degradation products of nerve agents. A commercially available solution of 1,3-imidazolium-bis-(1-hexylbenzylimidazolium) trifluoride (IBHBI) formed adducts with alkylphosphonic acids (APAs), allowing detection of the APAs by positive mode ESI-MS. Tandem mass spectrometry was used for the unambiguous identification of the APAs. Parameters influencing the formation and stability of these adduct during mass spectrometric analysis, such as solvent composition, concentration of IBHBI, effect of pH and interferences by salts, were optimized. The absolute limits of detection (0.1 ng) for achieved for the APAs were better than those previously reported, and linear dynamic ranges of 10-2000 ng mL(-1) were achieved. The method was repeatable with a relative standard deviation ≤7.3%. APAs present in aqueous samples provided by the Organization for the Prohibition of Chemical Weapons during the 22(nd) and 24(th) Official Proficiency tests were detected and identified as IBHBI adducts. The added advantage of this method is that low-mass analytes are detected at higher mass, thus obviating the problem with background noise at low mass.     

Solid state white light emitting systems based on CeF3: RE3+ nanoparticles and their composites with polymers

A series of doped CeF(3): RE(3+) (RE(3+): Tb(3+), Eu(3+) and Dy(3+)) nanoparticles were synthesized, with the aim of obtaining a white light emitting composition, by a simple polyol route at 160°C and characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR) and photoluminescence. Uniformly distributed and highly water-dispersible rectangular nanoparticles (length ~15-20 nm, breadth ~5-10 nm) were obtained. The steady state and time resolved luminescence studies confirmed efficient energy transfer from the host to activator ions. Lifetime studies revealed that optimum luminescence is observed for 2.5 mol% Dy(3+) and 7.5 mol% Tb(3+). The energy transfer efficiencies (Ce(3+) to activators) were found to be 89% for CeF(3): Tb(3+) (7.5 mol%) nanoparticles and 60% for CeF(3): Dy(3+) (2.5 mol%) nanoparticles. Different concentrations of Tb(3+), Eu(3+) and Dy(3+) were doped to achieve a white light emitting phosphor for UV-based LEDs (light emitting diodes). Finally CeF(3), triply doped with 2.0 mol%Tb(3+), 4.5 mol% Eu(3+) and 3.5 mol% Dy(3+), was found to have impressive chromaticity co-ordinates, close to broad day light. The colloidal solutions of doped CeF(3) nanoparticles emitted bright green (Tb(3+)), blue (Dy(3+)) and white (triply doped) luminescence upon host excitation. Composites of poly methyl methacrylate (PMMA) and poly vinyl alcohol (PVA) were made with CeF(3): 5.0 mol%Tb(3+), CeF(3): 5.0 mol% Dy(3+) and triply doped white light emitting composition. The CeF(3)/PMMA (PVA) nanocomposite films, so obtained, are highly transparent (in the visible spectral range) and exhibit strong photoluminescence upon UV excitation.     

Synthesis of 5‐aryl and 5‐amidocamptothecins

A variety of 5‐aryl‐(20S)‐camptothecin derivatives were synthesized by the reaction of 5‐hydroxy‐(20S)‐camptothecin with aromatic hydrocarbons under Friedel‐Craft reaction conditions in moderate to good yield as diastereomeric pairs. The methodology was then extended for the synthesis of 5‐amido‐(20S)‐camptothecin derivatives by reacting 5‐hydroxy‐(20S)‐camptothecin with alkyl and aryl nitriles under Ritter type reaction conditions. The reaction is presumed to proceed through an iminium ion intermediate under Friedel Craft and Ritter type reaction condition, which is further trapped by nucleophile present in the reaction medium. J. Heterocyclic Chem., 00 , 00 (2011).     

Gas chromatography-electron ionization-mass spectrometry analysis of O,O'- dialkyl methylphosphonites for verification analysis of the Chemical Weapons Convention

Gas chromatography-mass spectrometry (GC-MS) analysis of O,O'-dialkyl methylphosphonites (DAMPs) was carried out with a view to developing a database and understanding the mechanism of fragmentation. DAMPs are included in the list of schedule 2B4 chemicals of the Chemical Weapons Convention. GC-MS analysis of DAMPs and their deuterated analogs revealed that their fragmentations were dominated by α-cleavages, alkenyl radical loss and hydrogen rearrangements. Based on fragment ions of deuterated analogs and density functional theory calculations, the fragmentation routes were rationalized.     

Synthesis and characterization of Eu doped SrY2O4 phosphor

The present paper reports that TL glow curve and kinetic parameter of Eu³⁺ doped SrY₂O₄ phosphor irradiated by beta source. Sample was prepared by solid state preparation method. Sample was characterized by XRD analysis and particle size was calculated by Debye–Scherrer formula. The sample was irradiated with Sr-90 beta source giving a dose of 10 Gy and the heating rate used for TL measurements are 6.7 °C/s. The samples display good TL peaks at 106 °C, 225 °C and 382 °C. The corresponding kinetic parameters are calculated. The photoluminescence excitation spectrum at 247 and 364 nm monitored with 400 nm excitation and the corresponding emission peaks at 590, 612 and 624 nm are reported.     

Natural dye-based photoelectrode for improvement of solar cell performance

In the present paper, photovoltaic studies of dye-sensitized solar cells (DSSCs) based on betacyanin/TiO₂ and betacyanin/WO₃–TiO₂ have been done. The cell performances were compared through I–V curves and wavelength dependant photocurrent measurements for the two new types of DSSCs. The TiO₂-coated DSSC showed the photovoltage and photocurrent of 300 mV and 4.96 mA/cm², whereas the cell employing WO₃–TiO₂ photoelectrode showed the values 435 mV and 9.86 mA/cm², respectively. The conversion efficiency of TiO₂ based dye-sensitized solar cell was found to be 0.69 %, while WO₃–TiO₂-based cell exhibited a higher conversion efficiency of 2.2 %. The better performance of the WO₃–TiO₂ dye-sensitized solar cell photoelectrode is thought to be due to an inherent energy barrier at the electrode/electrolyte interface leading to the reduced recombination of photoinduced electrons.     

Radiation grafting of acrylonitrile on ethylene-propylene diene terpolymer rubber: Optimization of grafting parameters and oil resistance properties

Radiation induced grafting of acrylonitrile (ACN) on ethylene-propene diene terpolymer (EPDM) rubber film was investigated by mutual radiation grafting technique. Effect of experimental variables viz. radiation dose, dose rate, type of solvent and monomer content on extent of grafting was studied. From the kinetic studies a mathematical relation R _g α[M]^0.7 D ^0.68 showing non-linear relationship for rate of grafting with monomer concentration and dose was deduced. The grafted samples showed increased hardness and oil resistance.     

Information patterns and Nash equilibria in extensive games — II

In Part I of this paper we introduced extensive games with a non-atomic continuum of players. It was shown that the Nash plays (outcomes) are invariant of the information patterns on the game, provided that no player's unilateral change in moves can be observed by others. This led to an enormous reduction in the Nash plays of the these games, as exemplified in the anti-folk theorem. Our concern in this sequel is to develop a finite version of these results.