Origins of the Forward Emission of Complex Fragments for 40Ar+159Tb Reaction at 30MeV/u

Light charged particles and complex fragments have been measured at forward angles in coincidence with two fission fragments for ⁴⁰Ar+¹⁵⁹Tb reaction at 25MeV/u. These three-body coincident events were sorted as a function of the impact parameter using linear momentum transfer and total transverse momenta methods. Equilibrium statistical emissions of complex fragments from quasi-target residues accompanied by non-equilibrium mid-rapidity components were found to dominate in central collisions, while projectile fragmentations were found to dominate in peripheral collision. Three components of complex-fragments from quasi-target, quasi-projectile and mid-rapidity soures were found in mid-central collision.     

纳米晶Y_2SiO_5∶Eu的浓度猝灭研究

报道了分别用溶胶－凝胶法合成的Ｙ２ＳｉＯ５∶Ｅｕ纳米晶和用高温固相法合成常规尺度的Ｙ２ＳｉＯ５∶Ｅｕ材料的光致发光光谱和猝灭浓度的实验研究．结果表明：纳米Ｙ２－ｘＥｕｘＳｉＯ５比常规尺度的Ｙ２－ｘＥｕｘＳｉＯ５有更高的猝灭浓度和更高的发光亮度．理论分析认为这是由于在纳米材料中能量共振传递被阻断和猝灭中心在各个纳米晶内分布的涨落造成的．这个结果为高亮度的Ｙ２ＳｉＯ５∶Ｅｕ纳米材料的实际开发应用展示了广阔前景．     

Dynamic characteristics of gas jets from subsonic and supersonic nozzles for high pressure gas laser cutting

During laser cutting of stainless steels, titanium and aluminum alloys, a coaxial and high pressure inert gas jet is used to improve the cut edge quality. The process normally consumes a large amount of inert gas and has a poor tolerance to variation in process parameters. This is solely because the gas nozzles are mostly of the conical and convergent type in which the gas jets are subsonic. Based on two dimensional steady state gas dynamic theory, computer simulation and shadowgraphic techniques, the gas jet patterns from conical nozzles and the newly designed supersonic nozzles are analyzed. The distribution of pressure, momentum, gas density and existence of shock waves are predicted and mapped. Based on these characteristics, the effect of the gas jets upon the cut quality is explained. It is concluded that a supersonic gas jet offers the best flow characteristics for high pressure laser cutting.     

Origins of Intermediate Mass Fragments for 40Ar+natAg Reaction at 30 MeV/u

The energy spectra of intermediate-mass fragments (IMF) (3≤Z≤16) have been measured from 6° to 110° for ⁴⁰Ar+^natAg reachon at 30 MeV/u. The energy spectra were analyzed by the moving source model. The natUres of the projechle-like source, target-like source and mid-rapidity source as well as the evolution with angle and nuclear charge were discussed. Two intermediate mass fragments, measured by correlation method in forward angles, come from two sources. One comes from projectile-like source, and other one mainly comes from intermediate source respectively.     

高速高饱和单行载流子光探测器的设计与分析

设计了一种In P基的背入射台面结构的单行载流子光探测器.通过在吸收层中采取高斯型掺杂界面及引入合适厚度和掺杂浓度的崖层,使得光探测器同时具备了高速和高饱和电流特性.理论分析表明,在光敏面为14μm2、反向偏压为2 V条件下,该器件的3 d B带宽可达58 GHz,直流饱和电流高达158 m A.在大功率光注入条件下,详细分析了光探测器带宽降低和电流饱和现象,得出能带偏移和电场坍塌是其根本原因的结论.     

基于工业CT图像重构的网格模型的保特征简化方法

对基于工业CT图像重构的网格模型进行网格简化时,大多数现有网格模型简化算法会丢失特征,出现网格质量不好的问题。因此提出一种网格模型保特征简化方法,该方法用三角形折叠法对原始模型进行简化,当简化后模型的平均二面角角度误差达到允许误差后,再使用边折叠法对模型进行简化。在三角形折叠法中提出了利用被折叠三角形的法向量、各个顶点的高斯曲率及其在周边三角形上的投影确定该三角形的折叠点,利用局部体积误差与二面角角度误差的无因次化和确定折叠代价的方法;在边折叠法中提出了将二面角角度误差引入到二次误差测度（QEM）法的折叠代价中的改进QEM法。实验结果表明：与其他算法相比,该方法能够生成保特征、高质量、低几何误差的网格模型。     

ZrCuSiAs型锰基化合物ThMnSbN中的化学压力效应

采用固相反应法合成了一种Zr Cu Si As型准二维层状锰基化合物Th Mn Sb N.基于X射线粉末衍射的结构精修显示,该化合物属于P4/nmm空间群.其晶胞参数为a=4.1731?, c=9.5160?.电输运测量显示,该化合物电阻率随温度下降缓慢上升,且在16 K附近出现电阻率异常.与此同时,该材料的磁化率在同一温度附近出现异常,显示出类似磁性相变的行为.进一步的比热测量中没有观察到磁相变导致的比热异常.另外,低温下的比热分析显示,该材料的电子比热系数为γ=19.7 m J·mol^–1·K^–2,远高于其他同类锰基化合物.该结果与电输运测量中观察到的低电阻率行为相符,暗示Th Mn Sb N中费米面附近存在可观的电子态密度.基于对一系列Zr Cu Si As型化合物晶体结构细节的比较,分析了含有萤石型Th₂N₂层的系列化合物中导电层所受化学压力的不同作用形式.     

碳化硅中点缺陷对热传导性能影响的分子动力学研究

碳化硅(SiC)由于性能优异,已广泛应用于核技术领域.在辐照环境下,载能入射粒子可使材料中的原子偏离晶体格点位置,进而产生过饱和的空位、间隙原子、错位原子等点缺陷,这些缺陷将改变材料的热物性能,劣化材料的服役性能.因此,本文利用平衡分子动力学方法(Green-Kubo方法)采用Tersoff型势函数研究了点缺陷对立方碳化硅(β-SiC或3C-SiC)热传导性能的影响规律.研究过程中考虑的点缺陷包括:Si间隙原子(Si_Ⅰ)、Si空位(Si_Ⅴ)、Si错位原子(Si_C)、C间隙原子(C_Ⅰ)、C空位(C_Ⅴ)和C错位原子(C_Si).研究结果表明,热导率(λ)随点缺陷浓度(c)的增加而减小.在研究的点缺陷浓度范围(点缺陷与格点的比例范围为0.2%—1.6%),额外热阻率(Δ_R-R_defect-R_perfect,R=1/λ,R_defect为含缺陷材料的热阻率,R_perfec...     

硼烯/石墨烯异质结缺陷态电子结构的第一性原理研究

采用密度泛函理论系统研究了硼烯-石墨烯异质结中缺陷态对体系电子结构特性的影响.发现缺陷态存在于石墨烯一侧时会破坏异质结结构;但缺陷态存在于硼烯一侧时异质结结构仍然会稳定存在,并且体系电子结构随缺陷态密度改变而发生明显变化:从无缺陷态时的金属特性变为多缺陷态时的半导体特性.常温下的分子动力学模拟进一步验证了相关体系的动力学稳定性.     

Determination of the surface states from the ultrafast electronic states in a thermoelectric material

We reveal the electronic structure in Yb Cd₂Sb₂,a thermoelectric material,by angle-resolved photoemission spectroscopy(ARPES)and time-resolved ARPES(tr ARPES).Specifically,three bulk bands at the vicinity of the Fermi level are evidenced near the Brillouin zone center,consistent with the density functional theory(DFT)calculation.It is interesting that the spin-unpolarized bulk bands respond unexpectedly to right-and left-handed circularly polarized probe.In addition,a hole band of surface states,which is not sensitive to the polarization of the probe beam and is not expected from the DFT calculation,is identified.We find that the non-equilibrium quasiparticle recovery rate is much smaller in the surface states than that of the bulk states.Our results demonstrate that the surface states can be distinguished from the bulk ones from a view of time scale in the nonequilibrium physics.