Diastereoselective Synthesis of γ-Butenolides Catalyzed by Potassium tert-Butoxide

Potassium tert-butoxide (0.1 mol%) catalyzed a vinylogous Mukaiyama aldol reaction between aromatic and aliphatic aldehydes with 2-(trimethylsilyloxy)furan. The corresponding γ-butenolides were obtained in good yields with good diastereoselectivities.     

The band alignment at CdS/Cu2ZnSnSe4 heterojunction interface

Band alignment at CdS/Cu₂ZnSnSe₄ heterojunction interface is studied by X‐ray photoemission spectroscopy. The Cu₂ZnSnSe₄ thin films are prepared by selenization of electrodeposited Cu‐Zn‐Sn precursors. CdS overlayers with different thickness are sequentially grown on the Cu₂ZnSnSe₄ substrate by pulsed laser deposition process. Photoemission spectra are obtained before and after each growth to study the conduction and valence band offsets at the heterojunction interface. The determined conduction band offset of 0.34 eV indicates a spike‐like ‘type I’ band alignment at CdS/Cu₂ZnSnSe₄ interface. The spike will avoid interface recombination, and it is low enough that electron could transfer from the Cu₂ZnSnSe₄ layer to the buffer layer which is suitable for solar cell's fabrication. Copyright © 2012 John Wiley & Sons, Ltd.     

Functional silver nanostructured surfaces applied in SERS and SIMS

Present article deals with functionality of silver nanostructured surfaces prepared by potentiostatic electrochemical deposition on the paraffin impregnated graphite electrode as template‐free substrates. The effect of the electrodeposition conditions on two silver surface functions: analytical signal enhancement in Surface‐enhanced Raman spectroscopy and pre‐ionization function, applied in secondary ion mass spectrometry (SIMS) is reported. Functional silver nanostructured substrate was prepared at a potential ?850 mV with a deposition duration of 20 min. Analytical signal enhancement factors of 3.2 ×10⁵ for Raman peak at 649 cm^?1, 3.0×10⁵ for peak at 810 cm^?1 and 2.7×10⁵ for peak at 1539 cm^?1 were determined for Rhodamine 6G at deposited surface. Slight pre‐ionization effect has been observed in SIMS, and 1.2×10⁵ fold signal enhancement was established for fragment of Rhodamine 6G with m/z 429 (M‐CH₃‐Cl). Electrochemical preparation of nanostructures represents a step towards surface integration directly into miniaturized systems and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Identification of two polyamides (PA11 and PA1012) using pyrolysis-GC/MS and MALDI-TOF MS

The main goal of this work is to identify two polyamides (PA11 and PA1012) by mass spectrometry including pyrolysis-GC/MS and MALDI-TOF MS. PA11 and PA1012 have similar properties and cannot be distinguished by many other methods. Using pyrolysis-GC/MS, the pyrograms of PA11 and PA1012 at 600 °C were compared. Specific pyrolyzates for PA11 and PA1012 were obtained, 2-azacyclotridecanone for PA11 and 1,10-diaminodecane, 1,10-dicyanodecane for PA1012, respectively, which was the basis to distinguish them. Meanwhile, MALDI-TOF MS can give specific repeat unit for these two polyamides, dehydrated 11-aminoundecanoic acid (M = 183) for PA11, acetylate of dodecanedioic acid and diaminodecane (M = 366) for PA1012, which can be another means of identifying them.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Kinetics for the Reaction between Potassium Ferricyanide and Cobalt Chloride in Aqueous Solution and Microemulsion

The kinetics for the reaction between potassium ferricyanide (K₃Fe(CN)₆) and cobalt chloride (CoCl₂) in aqueous solution and water/bis(2-ethylhexyl) sodium sulfosuccianate (AOT)/isooctane microemulsions were studied by three-wavelength spectrophotometry at 298.2 K. The second-order rate constants (k₂) were calculated from the time dependence of the concentration of reactant K₃Fe(CN)₆. The result showed that the reaction rates in water/AOT/isooctane microemulsions were slower than that in the aqueous solution, and k₂ decreased with molar ratio (ω) of water to AOT in microemulsions, which was interpreted by the transition state theory and confirmed that the reaction took place at the interfaces of the microemulsion water pools.     

Plutonium-239 sorption and transport on/in unsaturated sediments: comparison of batch and column experiments for determining sorption coefficients

Sorption (distribution) coefficients of plutonium were most often derived by static batch experiments. However, it is not clear how unsaturated flow conditions including moisture content and pore water velocity change the sorption coefficients. Transport experiments of plutonium through the unsaturated sediments packed into the columns were then performed in order to determine the sorption coefficients (column-K _ds). Static batch experiments were also conducted to obtain batch-K _ds and then compare the differences between batch-K _ds and column-K _ds. The results show that unsaturated flow conditions had no significant effect on column-K _ds, and the average column-K _d value was 1.74 ± 0.02 m³/kg. By comparison, batch-K _d values spanned several orders of magnitude, regardless of the specified liquid–solid conditions. Moreover, the batch-K _d (22.7 m³/kg) at the standard L/S (4 mL/g) recommended by ASTM D 4319 was over an order of magnitude larger than the average column-K _d.     

近红外光谱结合化学计量学评价胚胎发育潜能

使用近红外光谱分析方法测量培养后的胚胎培养液,结合偏最小二乘判别分析对胚胎发育潜能进行评价,鉴别具有妊娠能力与不具妊娠能力的胚胎。为了提高模型的判别能力,消除无信息变量对模型稳定性影响,分别采用基于蒙特卡罗的无信息变量消除法(MC-UVE)、竞争性自适应加权抽样法(CARS)与基于变量稳定性的竞争性自适应加权抽样法(SCARS),对光谱进行波长选择。结果表明,与采用全谱74%的正判率相比较,采用这3种波长选择方法,模型独立检验集的正判率分别提高至74.24%,77.12%与80.10%,建模使用变量数降至50以内。比较发现,SCARS的模型优化能力和稳定性均好于MC-UVE和CARS方法。采用近红外光谱结合化学计量学方法预测胚胎的发育潜能是可行的。     

双功能配体促进的钯催化不对称醚化和胺化反应（英文）

研究双亚砜膦配体(BiSO-P)亚砜基团的Bronsted碱性在协同催化反应中的作用.1H NMR研究表明双亚砜膦与醇和胺等质子试剂形成氢键;并将此类配体应用于钯催化的不对称醚化和胺化反应,最高获得99%ee.研究发现氢键的存在能有效提高反应的ee值,配体亚砜基团在反应过程中同时起着Lewis和Bronsted碱的作用.     

Substrate interaction effects on order to disorder transition behavior in block copolymer films

We present an overview of the recent progress on the phase transition in the block copolymer (BCP) films in terms of the interfacial interactions effects of the substrates and the χ (Flory-Huggins segmental interaction parameter) effects between the two blocks. For the BCP films thinner than a critical thickness (L_c) above which the transition is independent of film thickness, the order-to-disorder transition (ODT) increased or decreased with decreasing film thickness depending on the interfacial interaction types. The rapid and slow changes in the ODT were attributed to the relative magnitude of enthalpic contribution to χ between two blocks. Interestingly, a periodic amplification in the block composition for the BCP films suppressed the compositional fluctuation in the film geometry, resulting in the ODT shifts from the bulk ODTs above L_c. This effect of the BCP films was more illustrated by the ODT shift effects depending on the strength of the preferential interactions on the substrates. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013