Raman and IR spectroscopy study of corrosion products on the surface of the hot‐dip galvanized steel with alkaline mud adhesion

The corrosion products formed on hot‐dip galvanized steel sheets for the automobile application with adhesion of alkaline mud containing different Cl⁻ ion contents are investigated by means of Raman and infrared (IR) spectroscopy. Results show that the Cl⁻ ion content in alkaline mud has great influence on the corrosion behavior of the galvanized steel. The Cl⁻ ions are responsible for the formation of the Zn₅Cl₂(OH)₈· H₂O layer on the surface of the steel at the early stage of corrosion. The rest of the Cl⁻ ions then penetrate and interrupt corrosion product layer resulting in pitting corrosion. Subsequently, the red corrosion product of α‐FeOOH (shaped as needle‐like structure) is formed, which then transforms into black rust of Fe₃O₄ (having a shape of slim needle). It is interesting to find out that pitting depth is inversely proportional to the Cl⁻ ion content. However, corrosion rate decreases with the increase of the Cl⁻ ions in mud. Copyright © 2009 John Wiley & Sons, Ltd.     

Stochastic resonance induced by a multiplicative periodic signal in a logistic growth model with correlated noises

The stochastic resonance (SR) phenomenon induced by a multiplicative periodic signal in a logistic growth model with correlated noises is studied by using the theory of signal-to-noise ratio (SNR) in the adiabatic limit. The expressions of the SNR are obtained. The effects of multiplicative noise intensity α and additive noise intensity D, and correlated intensity λ on the SNR are discussed respectively. It is found that the existence of a maximum in the SNR is the identifying characteristic of the SR phenomena. In comparison with the SR induced by additive periodic signal, some new features are found: (1) When SNR as a function of λ for fixed ratio of α and D, the varying of α can induce a stochastic multi-resonance, and can induce a re-entrant transition of the peaks in SNR vs λ; (2) There exhibits a doubly critical phenomenon for SNR vs D and λ, i.e., the increasing of D (or λ) can induce the critical phenomenon for SNR with respect to λ (or D); (3) The doubly stochastic resonance effect appears when α and D are simultaneously varying in SNR, i.e., the increment of one noise intensity can help the SR on another noise intensity come forth.      

任意相位差条纹信号细分方法的研究

为消除传统细分方法中由于两路条纹信号不正交引入的细分误差，提出了一种可对任意相位差条纹信号直接细分的新方法。根据两路条纹信号的极性和幅值大小，把一个信号周期分成8个区段。高速采集两路条纹信号，通过判断信号采样点所处的区段是否跳变对信号幅值交点进行动态跟踪。对不足一个周期的条纹移动，当测量出起点与终点的幅值，计算出其所在的区段及位置后，结合两路信号的交点，可实现对任意相位差条纹信号的细分。实验结果表明，该方法突破了传统细分方法必须信号正交的限制，可对任意相位差信号进行准确地细分，降低了条纹测量中器件安装与调试的难度，具有更强的环境适应性和抗干扰能力。     

RF and field measurements of the SSC-LINAC RFQ

The 53.667 MHz continuous-wave heavy ion RFQ has been designed and manufactured for the SSC-LINAC project.This four-rod RFQ accelerates ions with maximum mass to charge ratio of 7 from 3.728 keV/u to 143 keV/u.Measurements have been carried out to check the RF performance of the cavity and the quality of the electric field.The S11 of the power coupler is adjusted to better than-44 dB,and the Q0 of the cavity is 6440.The quality of the electric field is evaluated by the perturbation method.The measurement procedure and data analysis will be discussed in detail.The error due to gravity of the perturbation bead has been corrected by averaging the fields in different quadrants.As a result,the unflatness of the electric field is±2.5%,and the dipole field component distributes from 0%to 20%in different longitudinal positions,which indicates the asymmetry of the quadrupole field.The unflatness of the quadrupole field distribution represents a good agreement with the simulation results.High power RF test and beam commissioning of the RFQ are on schedule in early 2014.     

LD泵浦的Nd:YVO_4激光器被动式产生近似无衍射绿光

使用连续式输出的砷化镓半导体激光器泵浦的掺钕钒酸钇激光器作为光源,利用磷酸氧钛钾晶体腔内倍频产生波长为532nm的绿光,通过轴棱锥产生了近似无衍射贝塞尔光束。推导了倍频产生的绿光的场分布,并模拟了倍频绿光经过轴棱锥产生的近似无衍射光束的轴向光强分布图和截面光强分布图。通过实验拍摄了距离轴棱锥不同位置的截面光强分布,测量了无衍射贝塞尔绿光的最大无衍射距离和中心光斑直径,实验数据与理论模拟基本吻合。实验结果说明所述方法产生的倍频无衍射绿光具有良好的光束质量,具有应用价值。     

基于机器视觉的布匹瑕疵在线检测

为实现图案布匹瑕疵在编织过程中的实时检测,提出一种通过区域差影自动分割瑕疵区域的检测方法。通过求取水平和竖直两方向距离叠加函数极值,并对极值做权重分析,精确求取纹理基元周期;根据所求纹理基元周期确定区域差影的区域大小,并对区域差影图像求取梯度,再进行标记分水岭分割,能够快速准确地分割出纹理瑕疵区域。实验结果表明:该算法能够准确地检测出纹理布匹瑕疵的位置,检测一帧用时200 ms,准确率均达98%以上,实时性强,检测精度高,满足工业现场要求。     

Quantum spin Hall effect in inverted InAs/GaSb quantum wells

We review the recent experimental progress towards observing quantum spin Hall effect in inverted InAs/GaSb quantum wells (QWs). Low temperature transport measurements in the hybridization gap show bulk conductivity of a non-trivial origin, while the length and width dependence of conductance in this regime show strong evidence for the existence of helical edge modes proposed by Liu et al. [Phys. Rev. Lett., 2008, 100: 236601]. Surprisingly, edge modes persist in spite of comparable bulk conduction and show only weak dependence on magnetic field. We elucidate that seeming independence of edge on bulk transport comes due to the disparity in Fermi-wave vectors between the bulk and the edge, leading to a total internal reflection of the edge modes.     

Narrowband photon pair generation and waveform reshaping

In this article, we review on narrowband photon pairs producedin nonlinear crystals, and especially in atomic ensembles. In atomicensembles, “write-read” process in pulse mode andspontaneous four-wave mixing process (SFWM) in continuous mode aretwo popular photon pair generation schemes. We specifically discussthe experimental works with continuous SFWM scheme in cold atomicensembles. Photon pairs produced in these systems are characteristicof controllable long coherence time, and therefore are accessiblewith direct temporal modulation. We elaborate on the recent techniqueson modulation and waveform reshaping of narrow-band paired photons.     

元素周期表中元素单晶基于局域密度理论的正电子寿命计算

在局域密度近似理论（LDA）的基础上用中性原子叠加模型和有限插分方法（SNA-FD）计算了元素周期表中各种元素单晶的正电子体寿命和单空位寿命.分析了不同结构的单晶中自由正电子的分布信息和湮没信息.元素单晶的正电子寿命计算值与文献中的实验测量值相符合,表明LDA基础上的SNA-FD方法可以作为单晶中正电子湮没理论计算的有效研究手段. 关键词： 局域密度近似理论 正电子寿命     

Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.