Validation of a RANS transition model using a high-order weighted compact nonlinear scheme

A modified transition model is given based on the shear stress transport (SST) turbulence model and an intermittency transport equation. The energy gradient term in the original model is replaced by flow strain rate to saving computational costs. The model employs local variables only, and then it can be conveniently implemented in modern computational fluid dynamics codes. The fifth-order weighted compact nonlinear scheme and the fourth-order staggered scheme are applied to discrete the governing equations for the purpose of minimizing discretization errors, so as to mitigate the confusion between numerical errors and transition model errors. The high-order package is compared with a second-order TVD method on simulating the transitional flow of a flat plate. Numerical results indicate that the high-order package give better grid convergence property than that of the second-order method. Validation of the transition model is performed for transitional flows ranging from low speed to hypersonic speed.     

Ferroelectricity and ferromagnetism in fine-grained multiferroic BaTiO3/(Ni0.5Zn0.5)Fe2O4 composites prepared by a novel hybrid process

Dense, homogeneous, and fine-grained multiferroic BaTiO₃/(Ni_0.5Zn_0.5)Fe₂O₄ composite ceramics are synthesized by a novel powder-in-sol precursor hybrid processing route. This route includes the dispersion of nanosized BaTiO₃ ferroelectric powders prepared via conventional sold-state ceramic process into (Ni_0.5Zn_0.5)Fe₂O₄ ferromagnetic sol-gel precursor prepared via a sol-gel wet chemistry process. The composite ceramics show coexistence of obvious ferroelectric and ferromagnetic hysteresis loops at room temperature. Very low dielectric loss of about 0.02–0.0067 in the range of 10 kHz–10 MHz can be achieved, which is about an order of magnitude lower than the results of many reports using conventional processes at room temperature. The combination of high permeability and permittivity with low losses in the ceramics enables significant miniaturization of electronic devices based on the ceramics.     

强流相对论电子束的数值模拟

我们研制了CEBQ程序和ENVLOP程序，模拟稳态相对论电子束在二极管区的产生和加速，以及电子束在阳极通道内的传输过程。CEBQ程序模拟二极管区电子轨道，当阳极电压为1．5MV时，阴极总发射电流为17．9kA，进入阳极通道内的传输电流为4．3kA，阳极入口处D=4cm的束发射度为24．9cm．mrad。ENVLOP程序使用线性近似下的包络方程，描述电子束包络在螺旋管引导磁场作用下的变化，讨论了外加引导磁场对包络的影响。计算结果表明，在合适引导磁场作用下，束包络起伏较小，进入阳极通道的束流(4．3kA)能全部通过。     

Thickness-shear vibration of a quartz plate connected to piezoelectric plates and electric field sensing

We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of the incremental thickness-shear vibration of the quartz plate vary with the biasing electric field. The biasing electric field induced frequency shift depends linearly on the field. Therefore this effect may be used for electric field sensing. The dependence of the electric field induced frequency shift on various material and geometric parameters is examined. When the electric field is of the order of 100 V/mm, the relative frequency shift is of the order of 10⁻⁵. The case when the piezoelectric plates are replaced by piezomagnetic plates is also investigated for magnetic field sensing, and similar results are obtained.     

基于三种气化炉的整体煤气化湿化燃气轮机循环热力性能分析

将燃料湿化和空气湿化应用到整体煤气化燃气轮机循环中,以降低NOx排放并有效利用系统低品位热。基于水煤浆、干煤粉及输运床三种气化炉,构建了多种整体煤气化湿化燃气轮机循环,分析了其热力性能并给出了湿化方式建议。研究表明：燃料湿化循环系统效率较高;空气湿化循环燃气轮机比功较大;整体煤气化湿化燃气轮机循环具有利用系统外部中低品...     

Editorial for Special Issue on Terahertz Technologies and Applications

Terahertz radiation,defined in the frequency range of 0.1-10 THz,has been exploited to demonstrate unique properties that do not apply to the adjacent domains of the electromagnetic waves,such as infrared and microwave.Recent advances in terahertz science and technology hold promise for a wide variety of essential applications,particularly in spectroscopy,sensing,imaging,non-destructive detections,and communications.This focus issue is comprised of invited and contributed original     

Investigation of morphology selection for CBr_4-C_2Cl_6 alloy in three dimensions with multi-phase field method

With the multi-phase field model, the unidirectional solidification with constant velocity growth and variable velocity growth of the CBr4-C2Cl6 eutectic alloy is simulated in three dimensions. The simulated results with constant velocity growth show that with the increase of pulling velocity, the morphology of the CBr4-C2Cl6 alloy evolves in the sequence of lamellar merging →lamellar-rod transition→stable lamellar growth→oscillating growth→lamellar branching. A morphology selection map is established with ...     

Implementing two optimal economical quantum cloning with superconducting quantum interference devices in a cavity

We propose a unified scheme to implement the optimal 1→ 3economical phase-covariant quantum cloning and optimal 1→3 economical real state cloning with superconducting quantum interference devices (SQUIDs) in a cavity.During this process,no transfer of quantum information between the SQUIDs and cavity is required.The cavity field is only virtually excited.The scheme is insensitive to cavity decay.Therefore,the scheme can be experimentally realized in the range of current cavity QED techniques.     

Three-dimension direct writing TiO<Subscript>2</Subscript> crystalline patterns in Bi-free glass using femtosecond laser

Crystalline TiO₂ was induced three dimensionally inside Bi-free glass sample by an 800 nm, 250-kHz femtosecond laser irradiation. Micro-Raman spectra analysis indicated that the laser-induced crystals in the focal point of the laser beam were monophase TiO₂ rutile. Continuous crystalline lines were written through moving the focal point of the laser beam inside the glass. The results demonstrate that this technique is a convenient method to engrave three-dimensional patterns of crystals for fabricating integrated optical devices in transparent materials.