Polarisabilites moléculaires et effet diélectrique de milieu à l'état liquide. Étude théorique de la molécule d'eau et de ses diméres

The model of Onsager in which a polar molecule undergoes a reaction field due to the polarization of the molecular surroundings is used to evaluate by a S.C.F. calculation (CNDO/2 approximation) the modifications of a molecular structure in the liquid state.Application to water molecule and to three polar dimers for values of the dielectric constant varying between 3 and 78, shows that most of geometric parameters and dipoles moments vary of few per cent when the molecule is inserted in a liquid. In the liquid state dipole moments do not depend very much on the dielectric constant but energies and relative stabilities of isomers are strongly dependent on the medium.[/p]

     

Reflections on spontaneous asymmetric synthesis by amplifying autocatalysis

Spontaneous generation of chirality was observed in the course of studying the mechanism of asymmetric autocatalysis by NMR in ZnR2 alkylation of pyrimidin-5-aldehydes. A systematic study was carried out in order to discover its origins. Even in clean fresh non-glass reaction vessels spontaneous ee was clearly observed, and was not dependent on any single reaction parameter. For comparison it was demonstrated that enantiomerically pure Zn alkoxide catalyst could control the configuration of the reaction product even when present at below micromolar concentrations. The high propensity of the Soai reaction system to produce an enantiomerically enriched product without initial bias is suggested to result from stochastic effects. These are especially important in autocatalysis because all the final products can be derived by breeding from a small number of initial events. The statistical excess of one enantiomer in that set is sufficient to generate a measurable ee in the product. The process is aided by the requirement for dimerisation before the product is an active catalyst. An enumeration that rationalises these observations is provided.     

Bestimmung von Aminosäuresequenzen in α-Keratose

Zusammenfassung Aus einem durch Trypsinabbau von -Keratose erhaltenen Gemisch von Peptiden wurden 15 neutrale, 5 saure und 2 basische Peptide durch Kombination papierchromatographischer und papierelektrophoretischer Methoden getrennt und in sehr geringen Mengen isoliert. Es wurden neben der Aminosäurezusammensetzung 14N-terminale Aminosäuren sowie einige Teilsequenzen in den untersuchten Peptiden ermittelt.Die mittlere Kettenlänge der Peptide beträgt 5,8 Aminosäuren.Mit 1 Tabelle3. Mitt. über Untersuchungen an -Keratose. 2. Mitt.:M. Fell undE. Schnabel, Hoppe-Seyler's Z. physiol. Chem.333, 218 (1963).     

Chemical and Structural Changes in Blood Undergoing Laser Photocoagulation¶

The treatment of cutaneous vascular lesions (port wine stains etc.) using lasers has been guided by theories based on the “cold” or room‐temperature optical properties of the hemoglobin target chromophore. We have recently presented evidence showing that under the influence of laser irradiation, the optical properties of blood in vitro are time and temperature dependent. Such complications are not currently subsumed into the in vivo theory. Here, we study the time‐domain optical properties of blood undergoing photocoagulation in vitro using two newly developed time‐resolved techniques. We also study the asymptotic effect of laser photocoagulation on the chemical and structural properties of the components of the blood matrix. We present evidence showing that the photocoagulation process involves significant changes in the optical absorption and scattering properties of blood, coupled with photothermally induced chemical and structural changes. We demonstrate the first use of a laser to deliberately generate magnetic resonance imaging contrast in vitro. We show that this technique offers significant potential advantages to in vivo intravenous chemical contrast agent injection.     

Synthesis and structure of the metallic K6Tl17: a layered tetrahedral star structure related to that of Cr3Si

The title compound, the Tl-richest in the K-Tl system, has been synthesized in Ta containers via direct reaction of the elements at 400 degrees C followed by quenching to room temperature and subsequent annealing at 150 degrees C for 4 weeks. It crystallizes in the orthorhombic space group Cccm (No. 66) with a = 16.625(1) A, b = 23.594(2) A, c = 15.369(2) A (22 degrees C), and Z = 8. Two different Tl(12) units consisting of augmented tetrahedral stars are condensed into layers of such tetrahedra, and further Tl(2) dumbbells and the potassium cations also interconnect the stars and layers into a three-dimensional network. The former anionic Tl(8) subunits clearly resemble those in the heteroatomic 3-D structure of cubic Cr(3)Si before their augmentation with bridging atoms. The compound is metallic (rho(270) = 22.6 micro omega x cm, alpha = 0.0023 K(-)(1)) and shows Pauli-like paramagnetic susceptibility (chi(296) = 1.1 x 10(-4) emu/mol). EHTB calculations illustrate the importance of Tl p-orbital bonding, the positive Tl-Tl overlap populations up to E(F), and greater strengths of the Tl-Tl bonding between and about the surface of the augmented Tl(12) units. Cations between the thallium layers play specific and important roles in the structure.     

Synthesis,spectroscopy and thermal properties of the nickel(II), palladium(II) and copper(II) complexes of bis(aminoalkyl)-oxamides (=LH2) including the crystal structure of Cu2L(NO3)2

Summary The synthesis of the Ni^II, Pd^II and Cu^II complexes of N, N-bis(aminoalkyl)oxamides (LH₂) is described and structures are proposed on the basis of their physical and spectroscopic properties. With Ni^II and Pd^II only one complex is formed with general formula NiL or PdL, characterised by coordination through two deprotonated amide N-atoms and two terminal NH₂ groups. With Cu^II it proved possible to obtain three structurally different compounds, depending on the pH, with general formulae Cu(LH₂)X₂, Cu₂(L)X₂ and CuL in which X=Cl, Br or NO₃. The structure of [Cu₂(C₈O₂N₄H₁₆](NO₃)₂ was solved by means ofx-ray diffraction; Mr=451.33, monoclinic, space group P2₁/n, a=9.503(4), b=7.614(1), c=10.407(3) Å, =98.43(3)°, V=744.3(7)ų, Z=2, Dx=1.202 g cm^–3, =1.33 cm^–1, (MoK)=0.71073 Å, F(000)=520, room temperature, R=0.043, wR=0.047 for 1080 observed [I>-3(I)] not systematically absent reflections out of 1423 measurements and 137 variables. The compound has a conformational chair/boat disorder with 82% in the more stable chair form.     

Rapid prototyping of polymer microsystems via excimer laser ablation of polymeric moulds

This study presents a novel method for rapid prototyping of polymer microsystems. The method is based on excimer laser ablation of a thermally and mechanically stable polymer, such as PEEK (poly-ether-ether-ketone). A negative of the desired microsystem is laser machined in PEEK, which can then be used directly for hot embossing or injection moulding of a series of prototypes. This approach is very rapid and considerably cheaper than more traditional approaches to toolmaking, while still performing well in terms of reproduction of tool dimensions. The reduction in time and cost for a master tool using this method opens up new possibilities for testing small series in the R&D phase of a microsystem. Finally, two particular applications of the technique are presented.     

C(3)-azido cephem II

The major product from the thermolysis and photolysis of C(3)-azido cephem 2 is the ring expanded 1,4,6-thiadiazepine azetidinone.     

Reaktion von 5-Oxo-A-nor-3,5-secocholestan-3-säure mit einfachen Hydrazinderivaten

The reaction of 5-oxo-A-nor-3,5-secocholestan-3-oic acid (1) with simple N-mono and N,N-disubstituted hydrazines including acetylhydrazide was studied. Derivatives of 4-amino-4-aza-cholest-5-ene-3-one (2) were obtained.

---

---

Herrn Prof. Dr.H. Bretschneider mit den besten Wünschen zum 70. Geburtstag gewidmet.     

Development of an in situ fiber optic Raman system to monitor hydrothermal vents

The development of a field portable fiber optic Raman system modified from commercially available components that can operate remotely on battery power and withstand the corrosive environment of the hydrothermal vents is discussed. The Raman system is designed for continuous monitoring in the deep-sea environment. A 785 nm diode laser was used in conjunction with a sapphire ball fiber optic Raman probe, single board computer, and a CCD detector. Using the system at ambient conditions the detection limits of SO(4)(2-), CO(3)(2-) and NO(3)(-) were determined to be approximately 0.11, 0.36 and 0.12 g l(-1) respectively. Mimicking the cold conditions of the sea floor by placing the equipment in a refrigerator yielded slightly worse detection limits of approximately 0.16 g l(-1) for SO(4)(-2) and 0.20 g l(-1) for NO(3)(-). Addition of minerals commonly found in vent fluid plumes also decreased the detection limits to approximately 0.33 and 0.34 g l(-1) respectively for SO(4)(-2) and NO(3)(-).