Characterization of sequence variation at 30 autosomal STRs in Chinese Han and Tibetan populations

Massively parallel sequencing (MPS) technologies have the ability to reveal sequence variations within STR alleles as well as their nominal allele lengths, which have traditionally been detected by CE instruments. Recently, Thermo Fisher Scientific has updated the MPS-STR panel, named the Precision ID GlobalFiler next-generation sequencing (NGS) STR Panel version 2, with primers redesigned to add two pentanucleotide tandem repeat loci and profile interpretation supported by the Converge software. Using the Ion Chef System, the Ion S5XL System, and the Converge software, genetic variations were characterized within STR repeat and flanking regions of 30 autosomal STR markers in 115 unrelated individuals from two Chinese population groups (58 Tibetans and 57 Hans). Nineteen STRs demonstrated a relative increase in diversity with the variant sequence alleles compared with those of traditional nominal length alleles. In total, 390 alleles were identified by their sequences compared with 258 alleles that were identified by length. Of these 92 sequence variants found within the STR repeat regions, 40 variants were located in STR flanking regions. Additionally, the agreement of the results with CE data was evaluated, as was the ability of this new MPS panel to analyze case-type (11 samples) and artificially degraded samples (seven samples in triplicate). The results generated from this study illustrate that extensive sequence variation exists in commonly used STR markers in the selected population samples and indicate that this NGS STR panel has the potential to be used as an effective tool for human forensics.     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

The Crystallization and Melting Behaviors of PDLA-b-PBS-b-PDLA Tri-block Copolymers

In this study,the poly(D-lactide)-block-poly(butylene succinate)-block-poly(D-lactide)(PDLA-b-PBS-b-PDLA)triblock copolymers with a fixed length of PBS and various lengths of PDLA are synthesized,and the crystallization behaviors of the PDLA and PBS blocks are investigated.Although both the crystallization behaviors of PBS and PDLA blocks depend on composition,they exhibit different variations.For the PDLA block,its crystallization behaviors are mainly influenced by temperature and block length.The crystallization signals of PDLA block appear in the B-D 2-2 specimen,and these signals get enhanced with PDLA block length.The crystallization rates tend to decrease with increasing PDLA block lendth during crystallizing at 90 and 100°C.Crystallizing at higher temperature,the crystallization rates increase at first and then decrease with block length.The crystallization rates decrease as elevating the crystallization temperature.The melting temperatures of PDLA blocks increase with block lengths and crystallization temperatures.For the PBS block,its crystallization behaviors are mainly controlled by the nucleation and confinement from PDLA block.The crystallization and melting enthalpies as well as the crystallization and melting temperatures of PBS block reduce as a longer PDLA block has been copolymerized,while the crystallization rates of the PBS block exhibit unique component dependence,and the highest rate is observed in the B-D 2-2 specimen.The Avrami exponent of PBS crystallites is reduced as a longer PDLA block is incorporated or the sample is crystallized at higher temperature.This investigation provides a convenient route to tune the crystallization behavior of PBS and PLA.     

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Despite significant progress achieved in Fischer–Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn²⁺‐ion exchanged ZSM‐5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO₂) at 20 % CO conversion. NMR spectroscopy, X‐ray absorption spectroscopy, and X‐ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM‐5. Quasi‐in‐situ solid‐state NMR, obtained by quenching the reaction in liquid N₂, detects C₂ species such as acetyl (‐COCH₃) bonding with an oxygen, ethyl (‐CH₂CH₃) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C?C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn²⁺‐ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ‐13, MCM‐22, and ZSM‐12) all give ethane predominantly. By contrast, a physical mixture of ZnO‐ZSM‐5 favors formation of hydrocarbons beyond C₃₊. These results provide an important guide for tuning the product selectivity in syngas conversion.     

Enantioselective Palladium(II)‐Catalyzed Oxidative Aminofluorination of Unactivated Alkenes with Et4NF⋅3 HF as a Fluoride Source

The first asymmetric Pd^II‐catalyzed aminofluorination of unactivated alkenes using chiral quinoline‐oxazolines (Quox) as ligands has been developed. This reaction provides easy access to a wide array of enantiomerically enriched β‐fluoropiperidines in good yields and with excellent enantioselectivity. Notably, Et₄NF?3 HF as a readily accessible nucleophilic fluoride source was found to play an essential role in the enantioselective control, and CsOCF₃ also acts a key additive to improve the excellent ee value of products.     

The Redox Coupling Effect in a Photocatalytic RuII‐PdII Cage with TTF Guest as Electron Relay Mediator for Visible‐Light Hydrogen‐Evolving Promotion

A nanocage coupling effect from a redox Ru^II‐Pd^II metal–organic cage (MOC‐16) is demonstrated for efficient photochemical H₂ production by virtue of redox–guest modulation of the photo‐induced electron transfer (PET) process. Through coupling with photoredox cycle of MOC‐16, tetrathiafulvalene (TTF) guests act as electron relay mediator to improve the overall electron transfer efficiency in the host–guest system in a long‐time scale, leading to significant promotion of visible‐light driven H₂ evolution. By contrast, the presence of larger TTF‐derivatives in bulk solution without host–guest interactions results in interference with PET process of MOC‐16, leading to inefficient H₂ evolution. Such interaction provides an example to understand the interplay between the redox‐active nanocage and guest for optimization of redox events and photocatalytic activities in a confined chemical nanoenvironment.     

Asymmetric Total Syntheses of Di‐ and Sesquiterpenoids by Catalytic C−C Activation of Cyclopentanones

To show the synthetic utility of the catalytic C?C activation of less strained substrates, described here are the collective and concise syntheses of the natural products (?)‐microthecaline A, (?)‐leubehanol, (+)‐pseudopteroxazole, (+)‐seco‐pseudopteroxazole, pseudopterosin A–F and G—J aglycones, and (+)‐heritonin. The key step in these syntheses involve a Rh‐catalyzed C?C/C?H activation cascade of 3‐arylcyclopentanones, which provides a rapid and enantioselective route to access the polysubstituted tetrahydronaphthalene cores presented in these natural products. Other important features include 1) the direct C?H amination of the tetralone substrate in the synthesis of (?)‐microthecaline A, 2) the use of phosphoric acid to enhance efficiency and regioselectivity for problematic cyclopentanone substrates in the C?C activation reactions, and 3) the direct conversion of serrulatane into amphilectane diterpenes by an allylic cyclodehydrogenation coupling.     

A ternary organic solar cell with 300 nm thick active layer shows over 14% efficiency

In order to meet the requirements for making organic solar cells(OSCs) through solution printing techniques, great efforts have been devoted into developing high performance OSCs with relatively thicker active layers. In this work, a thick-film(300 nm)ternary OSC with a power conversion efficiency of 14.3% is fabricated by introducing phenyl-C_(61)-butyric-acid-methyl ester(PC_(61)BM) into a PBDB-T-2Cl:BTP-4 F host blend. The addition of PC_(61)BM is found to be helpful for improving the hole and electron mobilities, and thus facilitates charge transport as well as suppresses charge recombination in the active layers, leading to the improved efficiencies of OSCs with relatively thicker active layers. Our results demonstrate the feasibility of employing fullerene derivative PC_(61)BM to construct a high-efficiency thick-film ternary device, which would promote the development of thick layer ternary OSCs to fulfill the requirements of future roll to roll production.     

Copolymer synthesis of poly(L-lactide-b-DMS-L-lactide) via the ring opening polymerization of L-lactide in the presence of α,ω-hydroxylpropyl-terminated PDMS macroinitiator

Various amounts of hydroxy terminated PDMS were linked into PLLA chains via in-situ ring opening polymerization at a very low content of SnOt₂. The ¹H and FTIR spectra provided evidence for the incorporation of the PDMS in the PLLA chains. The molecular weights, T_g, T_m, crystallinity and the heats of fusion decreased as the feed mole ratio of PDMS/LLA in the block copolymer increased. The molecular weight distribution broadened as the content of the PDMS increased, due the occurrence of two initiation and propagation mechanisms. Linking PDMS into the PLLA chains improved its thermal stability. © 1996 John Wiley & Sons, Inc.     

Effects of guanidinium cations on structural,optoelectronic and photovoltaic properties of perovskites

Guanidinium (GA) cations are intentionally introduced in MAPbl3 perovskite by considering its potential capability of stabilizing the material through plenty of...