Rheological studies of the gelation of aqueous solutions of acrylamide-acrylic acid copolymers in the presence of chromium chloride

The gelation kinetics of aqueous solutions of acrylamideacrylic acid copolymers in the presence of chromium ions was studied with different rheometers. The gel time is found to vary with the principle of the apparatus because of a low shear dependence of the elongation of the macromolecules. The variations of the gel time with the experimental conditions of the gel preparation were investigated and we conclude that the gelation is governed by the oligornerization kinetics of the chromium ions which are instantaneously, complexated by the carboxylate groups of the polymer. The variation laws of the gel time and of the elastic modulus with chromium and polymer concentrations, temperature and ionic strength are in qualitative agreement with the structure of the temporary network of the semi-dilute solutions of these copolymers.     

On the crucial importance of the pH for the formation and self-stabilization of protein microgels and strands

Stable suspensions of protein microgels are formed by heating salt-free β-lactoglobulin solutions at concentrations up to about C = 50 g·L(-1) if the pH is set within a narrow range between 5.75 and 6.1. The internal protein concentration of these spherical particles is about 150 g·L(-1) and the average hydrodynamic radius decreases with increasing pH from 200 to 75 nm. The formation of the microgels leads to an increase of the pH, which is a necessary condition to obtain stable suspensions. The spontaneous increase of the pH during microgel formation leads to an increase of their surface charge density and inhibits secondary aggregation. This self-stabilization mechanism is not sufficient if the initial pH is below 5.75 in which case secondary aggregation leads to precipitation. Microgels are no longer formed above a critical initial pH, but instead short, curved protein strands are obtained with a hydrodynamic radius of about 15-20 nm.     

Performance evaluation on a wide set of matrix-assisted laser desorption ionization matrices for the detection of oligosaccharides in a high-throughput mass spectrometric screening of carbohydrate depolymerizing enzymes

Compared to other analytical methods, matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) presents several unique advantages for the structural characterization of degradation products of carbohydrates. Our final goal is to implement this technique as a high-throughput platform, with the aim of exploring natural bio-diversity to discover new carbohydrate depolymerizing enzymes. In this approach, a variety of carbohydrates will be used as enzymes substrates and MALDI-MS will be employed to monitor the oligosaccharides produced. One drawback of MALDI, however, is that the choice of the matrix is largely dependent on the chemical properties of the analyte. In this context, our objective in the present work was to find the smallest set of MALDI matrices able to detect chemically heterogeneous oligosaccharides. This was done through the performance evaluation of more than 40 MALDI matrices preparations. Homogeneity of analyte-matrix deposits was considered as a critical feature, especially since the final objective is to fully automate the analyses. Evaluation of the matrices was done by means of a rigorous statistical approach. Amongst all tested compounds, our work proposes the use of the DHB/DMA ionic matrix as the most generic matrix, for rapid detection of a variety of polysaccharides including neutral, anionic, methylated, sulfated, and acetylated compounds. The selected matrices were then used to screen crude bacterial incubation media for the detection of enzymatic degradation products.     

Selective adsorption of proteins on single-wall carbon nanotubes by using a protective surfactant

The dispersion of highly hydrophobic carbon materials such as carbon nanotubes in biological media is a challenging issue. Indeed, the nonspecific adsorption of proteins occurs readily when the nanotubes are introduced in biological media; therefore, a methodology to control adsorption is in high demand. To address this issue, we developed a bifunctional linker derived from pyrene that selectively enables or prevents the adsorption of proteins on single-wall carbon nanotubes (SWNTs). We demonstrated that it is possible to decrease or completely suppress the adsorption of proteins on the nanotube sidewall by using proper functionalization (either covalent or noncovalent). By subsequently activating the functional groups on the nanotube derivatives, protein adsorption can be recovered and, therefore, controlled. Our approach is simple, straightforward, and potentially suitable for other biomolecules that contain thio or amino groups available for coupling.     

High-resolution Fourier-transform infrared spectroscopy of the ν6 and Coriolis perturbation allowed ν10 modes of ketenimine

High-resolution FTIR spectra of the short lived species ketenimine have been recorded in the region 700-1300 cm(-1) and over 1500 transitions of the ν(10) and ν(6) modes have been assigned. Effective rotational and centrifugal distortion parameters for the v(10) = 1 and v(6) = 1 (excluding K(a) = 5) states were determined by co-fitting transitions, and treating strong a- and c-axis Coriolis interactions between them. Other perturbations attributed to interactions with the v(8) = 2 and v(12) = 1 + v(8) = 1 dark-states were also observed and treated. The ν(10) transitions are predicted to be inherently very weak, but are enhanced by an intensity stealing effect with the highly IR active ν(6) mode. A mechanism for this intensity stealing in ketenimine is also detailed.     

Evaluation of automated sample preparation, retention time locked gas chromatography-mass spectrometry and data analysis methods for the metabolomic study of Arabidopsis species

In this paper, automated sample preparation, retention time locked gas chromatography-mass spectrometry (GC-MS) and data analysis methods for the metabolomics study were evaluated. A miniaturized and automated derivatisation method using sequential oximation and silylation was applied to a polar extract of 4 types (2 types×2 ages) of Arabidopsis thaliana, a popular model organism often used in plant sciences and genetics. Automation of the derivatisation process offers excellent repeatability, and the time between sample preparation and analysis was short and constant, reducing artifact formation. Retention time locked (RTL) gas chromatography-mass spectrometry was used, resulting in reproducible retention times and GC-MS profiles. Two approaches were used for data analysis. XCMS followed by principal component analysis (approach 1) and AMDIS deconvolution combined with a commercially available program (Mass Profiler Professional) followed by principal component analysis (approach 2) were compared. Several features that were up- or down-regulated in the different types were detected.     

Towards single cell heat shock response by accurate control on thermal confinement with an on-chip microwire electrode

Metal electrodes with micron scale width enable the heating of less than a dozen cells in a confluent layer at predictable temperatures up to 85 °C with an accuracy of ±2 °C. Those performances were obtained by a preliminary robust temperature calibration based on biotin-rhodamine fluorescence and by controlling the temperature map on the substrate through thermal modeling. The temperature accuracy was proved by inducing the expression of heat shock proteins (HSP) in a few NIH-3T3 cells through a confined and precise temperature rise. Our device is therefore effective to locally induce a heat shock response with almost single-cell resolution. Furthermore, we show that cells heated at a higher temperature than the one of heat shock remain alive without producing HSP. Electrode deposition being one of the most common engineering processes, the fabrication of electrode arrays with a simple control circuit is clearly within reach for parallel testing. This should enable the study of several key mechanisms such as cell heat shock, death or signaling. In nanomedicine, controlled drug release by external stimuli such as for example temperature has attracted much attention. Our device could allow fast and efficient testing of thermoactivable drug delivery systems.     

Benzoxazole-based heterometallic dodecanuclear complex [Dy(III)4Cu(II)8] with single-molecule-magnet behavior

Three Cu-Ln (Ln = Dy, Gd, Y) dodecanuclear clusters assembled by a novel ligand of the benzoxazole type are reported. The dysprosium cluster exhibits a frequency dependence of the alternating-current susceptibility and hysteresis loop at low temperature, indicating single-molecule-magnet behavior.     

Linear and nonlinear optical properties of cationic bipyridyl iridium(III) complexes: tunable and photoswitchable?

A series of cationic Ir(III) substituted bipyridyl ()(N(∧)N (N(∧)N-bpy) complexes incorporating electron-donor and -acceptor substituents, [Ir(C(∧)N-ppy-R')(2)(N(∧)N-bpy-CH═CH-C(6)H(4)-R)][X] (X(-) = PF(6)(-) or C(12)H(25)SO(3)(-)), 2 (a, R = NEt(2) and R' = Me; b, R = O-Oct and R' = Me; c, R = NO(2) and R' = C(6)H(13); C(∧)N-ppy = cyclometalated 2-phenylpyridine, [Ir(C(∧)N-ppy-Me)(2)(N(∧)N-bpy-CH═CH-thienyl-Me)][PF(6)], 2d, and the dithienylethene (DTE)-containing complex 2e have been synthesized and characterized, and their absorption, luminescence, and quadratic nonlinear optical (NLO) properties are reported. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations on the complexes facilitate a detailed assignment of the excited states involved in the absorption and emission processes. All five complexes are luminescent in a rigid glass at 77 K, displaying vibronically structured spectra with long lifetimes (14-90 μs), attributed to triplet states localized on the styryl-appended bipyridines. The second-order NLO properties of 2a-d and related complexes 1a-d with 1,10-phenanthrolines have been investigated by both electric field induced second harmonic generation (EFISH) and harmonic light scattering (HLS) techniques. They are characterized by high negative EFISH μβ values which decrease when the ion pair strength between the cation and the counterion (PF(6)(-), C(12)H(25)SO(3)(-)) increases. The EFISH response is mainly controlled by metal-to-ligand charge-transfer/ligand-to-ligand charge-transfer (MLCT/L'LCT) processes. A combination of HLS and EFISH techniques is used to evaluate both the dipolar and octupolar contributions to the total quadratic hyperpolarizability, demonstrating that the major contribution is controlled by the octupolar part. The incorporation of a photochromic DTE unit into the N(∧)N-bpy ligand (complex 2e) allows the luminescence to be switched ON or OFF. The photocyclisation of the DTE unit can be triggered by using either UV (365 nm) or visible light (430 nm), leading to an efficient quenching of the ligand-based 77 K luminescence, which can be restored upon irradiation of the closed form at 715 nm. In contrast, no significant modification of the EFISH μβ value is observed upon photocyclization, suggesting that the quadratic NLO response is dominated by the MLCT/L'LCT processes, rather than by the intraligand excited states localized on the substituted bipyridine ligand.