Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with nitric oxide

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with NO. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas at five temperatures in the range 299-592 K. The second-order rate constants at 10 Torr fitted the Arrhenius equation log(k/cm3 molecule(-1) s(-1)) = (-11.66 +/- 0.01) + (6.20 +/- 0.10 kJ mol(-1))/RT ln 10 The rate constants showed a variation with pressure of a factor of ca. 2 over the available range, almost independent of temperature. The data could not be fitted by RRKM calculations to a simple third body assisted association reaction alone. However, a mechanistic model with an additional (pressure independent) side channel gave a reasonable fit to the data. Ab initio calculations at the G3 level supported a mechanism in which the initial adduct, bent H2SiNO, can ring close to form cyclo-H2SiNO, which is partially collisionally stabilized. In addition, bent H2SiNO can undergo a low barrier isomerization reaction leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are NH2 + SiO. The rate controlling barrier for this latter pathway is only 16 kJ mol(-1) below the energy of SiH2 + NO. This is consistent with the kinetic findings. A particular outcome of this work is that, despite the pressure dependence and the effects of the secondary barrier (in the side reaction), the initial encounter of SiH2 with NO occurs at the collision rate. Thus, silylene can be as reactive with odd electron molecules as with many even electron species. Some comparisons are drawn with the reactions of CH2 + NO and SiCl2 + NO.     

Mass spectrometric interrogation of thioester-bound intermediates in the initial stages of epothilone biosynthesis

Direct detection of thioester intermediate mixtures bound to EpoC, a 195 kDa polyketide synthase, has been achieved using limited proteolysis and Fourier-transform mass spectrometry (FTMS). Incubation with various N-acetylcysteamine thioester (S-NAC) substrate mimics produced mass shifts on the EpoC ACP domain consistent with their condensation with an enzyme-bound carbanion produced by the decarboxylation of methylmalonyl-S-EpoC. Reconstitution of EpoA-ACP, EpoB, and EpoC gave a +165.0 Da mass shift consistent with the formation of the methylthiazolyl-methacrylyl product by incorporation of acetyl-CoA, cysteine, and methylmalonyl-CoA. Thioester-templated reaction intermediates and products are typically characterized by quantifying radioactive substrates, either enzyme bound or chemically hydrolyzed. In contrast, the MS-based methodology described here provides semiquantifiable ratios of free enzyme, intermediate, and product occupancy and reveals that certain substrates result in a >50% formation of nonproductive intermediates.     

Catalytic asymmetric vinylation of ketones

This communication describes the catalytic asymmetric 1,2-addition of vinylzinc reagents to aromatic, alpha,beta-unsaturated, and dialkyl ketones with enantioselectivities between 79 and 97% and with yields ranging from 84 to 98%. The products of these reactions are tertiary allylic alcohols with chiral quaternary centers that are useful in organic synthesis. The reaction involves hydrozirconation of a terminal alkyne, transmetalation to zinc, and addition to a ketone in the presence of a chiral titanium-based Lewis acid catalyst. The reactions proceed smoothly at room temperature in under 24 h.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Exo-metal coordination by a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 dimer in [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (2-NC5H4 = 2-pyridyl, C5H5N = pyridine)

The in situ reaction of the phosphazane dimer [CIP(mu-N-2-NC5H4)]2 (2) with CuCl in the presence of CsH5N/H2O gives the title complex [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (1), containing a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 ligand which is isoelectronic with species of the type [(P(mu-NR))2NR]2.     

Steric control in the oligomerisation of phosphazane dimers; towards new phosphorus-nitrogen macrocycles

The reaction of [ClP(mu-NtBu)]2 (1) with H2O (1 : 2 equivalents) in the presence of excess Et3N gives the new chain compound [(mu-O)[P(mu-NtBu)2P(H)=O]2] (3), consisting of two P2N2 rings linked by a mu-O atom and terminating in P(V)(H)=O groups. A similar chain species is obtained from the reaction of the lithiate of [(tBuNH)P(mu-NtBu)2P(H)=O] (5) with [ClP(mu-NtBu)2P(NHtBu)] (2), the product being [(mu-O)[P(mu-NtBu)2P(NHtBu)]2] (6). Compounds 3 and 6 are the first examples of O-bridged chain phosphazanes and potential precursors to new phosphorus-nitrogen macrocycles. The syntheses and X-ray structures of 3, 5 and 6 are reported.     

Synthesis and structure of the calixarene-like phosph(III)azane macrocycle [{P(mu-N(t)Bu)}2{1,5-(NH)2C10H6}]3

The reaction of [ClP(mu-NtBu)]2 with 1,5-diamino-naphthalene [1,5-(NH2)2C10H6] in Et3N-thf gives the trimeric macrocycle [{P(mu-NtBu)}2{1,5-(NH)2C10H6}]3(1); the X-ray structure of the toluene solvate 1.3toluene reveals a cone-shaped (calixarene-like) arrangement in which toluene guest molecules are trapped within the cavity.     

Synthesis of an elusive,stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E_1/2 or E_pa = −1.6 V versus Fc/Fc⁺, which is ∼800 mV less than the reduction potential predicted (E_pa = −2.4 V vs. Fc/Fc⁺) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

The super electron donor (SED) capabilities of 2-azaallyl anions has recently been discovered and applied to diverse reactivity; their structures and electron transfer characteristics are reported herein.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Ellipsometry and Infrared Reflection Absorption Spectroscopy of Adsorbed Layers of Soluble Surfactants at the Air-Water Interface

Optical techniques play an increasingly important role in the characterization of microstructure and surface densities of thin films at various interfaces. In this study, ellipsometry and infrared reflection absorption spectroscopy (IRRAS) were used for determining the surface densities of adsorbed layers of cationic surfactants in situ at the air-water interface. The surfactants were N(alpha)-lauroyl-arginine methyl ester (LAM) and N(alpha), N(omega)-bis(N(alpha)-lauroyl-arginine)-alpha,omega-alkylidenediamide (C(6)(LA)(2)). In ellipsometry, the ellipsometric phase angle Delta was obtained at various surfactant concentrations and was referenced to that of the solvent. Three algorithms were used for analyzing the data. The surface densities are 3.3+/-0.3x10(-6) mol/m(2) at 1 mM for LAM and 1.5+/-0.3x10(-6) mol/m(2) at 0.1 mM for C(6)(LA)(2) by using an algorithm for which the monolayer thickness was estimated from molecular modeling. The corresponding surface densities from literature surface tension data and the Gibbs adsorption isotherm procedure are 2.2+/-0.4x10(-6) mol/m(2) and 1.2+/-0.2x10(-6) mol/m(2), respectively. In addition, IRRAS spectra were obtained from monolayers of LAM and C(6)(LA)(2) at the air-water interface. The frequencies of the methylene stretching vibration bands indicate that the monolayers are liquid-like. The surface densities were determined from the reflectance-absorbance data by using the model of either an isotropic film or an anisotropic film on the aqueous subphase. The IRRAS-based surface densities from either model, by using DPPC monolayers for calibration, are 2.4+/-0.7x10(-6) mol/m(2) at 1 mM for LAM and 1.5+/-0.6x10(-6) mol/m(2) at 0.1 mM for C(6)(LA)(2), which are in fair agreement with the ellipsometry- and the surface-tension-based surface densities. Copyright 2001 Academic Press.