An Improved Synthesis of 2′-Hydroxy-3′,4′,6′-trimethoxyacylophenones

A wide variety of 2′-hydroxypolymethoxyacetophenones and propiophenones, e.g. 1a and 1b are used in the synthesis of flavone and ehromone natural products.¹ Repeated attempts to prepare 1a and 1b by reacting 1,2,3,5-tetramethoxybenzene 2 with acetyl or propionyl chlorides and AlCl₃ in ether² gave products which were difficult to purify.³ We traced the problem to ring-ethoxy contaminants which were isolated and tentatively identified as 3a and 3b.     

Effect of CyDye minimum labeling in differential gel electrophoresis on the reliability of protein identification

Differential 2-DE (DIGE) is a widely applied tool for the quantitative analysis of differentially represented proteins. The method involves covalent minimal labeling of proteins prior to their electrophoretic separation using CyDye DIGE Fluor minimal dyes. This methodology creates two different species per protein, the labeled (approx. 1-2%) and unlabeled (approx. 98-99%) ones, which differ in their molecular masses by 434-464 Da, depending on the attached dye. DIGE followed by automated spot picking according to the CyDye coordinates misses in many instances the exact positions where the maximum amounts of the considered proteins are located. This fact leads to a loss in sensitivity of the subsequent MALDI-MS analyses and results in a reduced reliability of protein identification and sequence coverage. In this paper, the migration differences of labeled and unlabeled species are quantified together with the impact of this effect on the certainty of protein identification and sequence coverage investigating proteins up to 90 kDa.     

Synthesis and properties of new glucocationic surfactants: model structures for marking cationic surfactants with carbohydrates

[reaction: see text] In this work, we report the synthesis of a new series of glucocationic surfactants, a class of surfactants we introduced very recently. The preparation of the surfactants is based on the synthesis of the 2-bromoethyl-2,3,4,6-tetra-O-acetyl-beta-D-glucopyranoside, whose preparation was studied in order to improve yields and stereoselectivity of this key intermediate. These glucocationic amphiphiles were prepared and studied as a model of cationic surfactants marked with a carbohydrate moiety. The use of carbohydrates as markers on cationic lipids was recently introduced to induce recognition by specific receptors, present on the surface of cell membranes. The chemicophysical characterization of these model structures can give more insight on the aggregation behavior. Conductivity and surface tension measurements were performed in order to characterize the compounds from the amphiphilic point of view. The results showed a different effect of the glucosidic moiety on the cmc value with respect to the glucopyridinium cationic surfactants. The surfactants also showed the tendency to form premicellar aggregates in solution when the hydrophobicity is raised.     

Spectroscopic and structural characterization of pure and FeCl<Subscript>3</Subscript>-containing tri-<Emphasis Type="Italic">n</Emphasis>-butyl phosphate

The spectroscopic properties and liquid structure of pure tri-n-butyl phosphate (TBP) and FeCl₃/TBP solutions have been investigated by Uv–Vis and Raman spectroscopies, X-ray diffraction and conductometry. Uv–Vis and Raman spectra, supported by conductometric measurements, consistently indicate that the solubilized salt is present mostly as TBP _n [FeCl_3???n ] ⁿ⁺ and FeCl₄ ^? complex ions due to specific interaction with the TBP phosphate group. Thanks to this interaction, a high amount of salt (up to 13 % w/w) can be dissolved despite the relatively low dielectric constant of TBP. The X-ray diffractogram of pure TBP has been interpreted in terms of three main contributions which can be attributed to spatial pair correlations between atoms of interacting TBP molecules. In the presence of increasing FeCl₃ amounts, it has been observed a progressive structuring effect, exerted by the dissolved salt, on the layers of opportunely oriented TBP molecules due to the formation of the complex ionic species. By simple treatment with NaBH₄, the synthesis of Fe nanoparticles has been achieved. The absence of water, the easiness of preparation, the high amount of salt which can be suspended and the peculiar physico-chemical properties of such systems are all elements worth of note for the fields of nanoparticle synthesis and for specialized technological applications.     

Magnetic pH-responsive nanogels as multifunctional delivery tools for small interfering RNA (siRNA) molecules and iron oxide nanoparticles (IONPs)

We here exploit pH-responsive nanogels as carriers to deliver functional anti-GFP siRNA and superparamagnetic IONPs to HeLa-GFP cells. The siRNA release via pH-mediated endosomal escape is shown. The IONPs act first as magnetofection agents to boost cellular uptake and then as probes to track the release mechanism by electron microscopy.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Superior Antibacterial Activity of Integral Lemon Pectin Extracted via Hydrodynamic Cavitation

Pectin extracted via hydrodynamic cavitation in water only from waste lemon peel and further isolated via freeze drying displays significant antibacterial activity against Staphylococcus aureus, a Gram positive pathogen which easily contaminates food. The antibacterial effect of the new IntegroPectin is largely superior to that of commercial citrus pectin, opening the way to advanced applications of a new bioproduct now obtainable in large amounts and at low cost from citrus juice industry's waste.     

Gels dried under supercritical and ambient conditions: a comparative study and their subsequent conversion to silica–carbon composite aerogels

In present work, we have prepared gels with various compositions of methyltrimethoxysilane—3-(2,3-epoxypropoxy) propyltrimethoxysilane (MTMS-GPTMS) using a two-step acid base sol–gel process. To make a comparative study between the two common drying routes, we prepared gels under supercritical and also under ambient conditions. The density of the supercritically dried hybrid aerogels lies between 0.18 and 0.31 gcm^?3, while the density of the ambient dried ones ranges between 0.35 and 0.42 gcm^?3. The surface area of MTMS-0.25 GPTMS aerogel dried under supercritical conditions, has been found to be 464 m² g^?1 with a pore volume and average pore diameter of 1.24 cm³ g^?1 and 11 nm respectively. The same composition dried under ambient conditions is found to have similar properties i.e. a BET surface area of 439 m² g^?1, pore volume of 1.22 cm³ g^?1 and average pore diameter of 11 nm. The aerogels were later pyrolyzed yielding silica/carbon composite aerogels. The pyrolized aerogels possessed a surface area as high as 207 m² g^?1 with a total pore volume of 0.98 cm³ g^?1. The pyrolysed aerogels were also calcined to yield carbon free materials.     

Direct mass spectrometry of polymers. XIV. Thermal fragmentation processes in poly-schiff bases

The thermal fragmentation processes in poly-Schiff bases have been investigated by direct pyrolysis–mass spectrometry. The mass spectral data show that the thermal fragmentation occurring in the polymers under investigation is characterized by hydrogen transfer reactions. In the case of a totally aromatic poly-Schiff base (polymer I ), the thermal fragmentation process involves hydrogen transfer irom the methyne group with formation of fragments bearing nitrile and/or phenyl end groups. In the case of aromatic-aliphatic poly-Schiff bases (polymers II–IV ), the hydrogen transfer process occurs from the aliphatic methylene groups. The latter process involves a lower energy and therefore occurs at lower temperatures with respect to the totally aromatic polymer I , with formation of thermal fragments bearing olefin and/or imine end groups. Beside these fragments, several thermal fragmentation compounds are also evolved by multiple hydrogen transfer reactions.     

Selenium dioxide oxidation of tetrahydro-β-carboline derivatives

The oxidation of some tetrahydro-β-carboline derivatives with selenium dioxide led to the formation of 1,4-dihydro or fully aromatic β-carbolines, depending on the nature and the number of substituents at 1 position. The oxidation of 2-acetyl derivatives followed a different course and the products originated by the attack at C-1 of the ring C of the tetrahydro-β-carboline were obtained.