A simplified [11C]phosgene synthesis

A new flow-through system for the production of [¹¹C]phosgene, a versatile labelling agent in radiochemistry for PET, is described. Cyclotron-produced [¹¹C]CH₄ is mixed with Cl₂ and converted into [¹¹C]CCl₄ by passing the mixture through an empty quartz tube at 510 °C. The outflow is directed through a Sb-filled guard that takes out Cl₂ and then, without intentional O₂ addition, through a second empty quartz tube at 750 °C, giving rise to [¹¹C]phosgene in 30–35% radiochemical yield.     

Adenosylcobinamide plus exogenous, sterically hindered, putative axial bases: a reinvestigation into the cause of record levels of Co-C heterolysis

A reinvestigation of an earlier Ph.D. thesis (Sirovatka, J. M. Ph.D. Thesis, Colorado State University, Fort Collins, CO, 1999) is reported herein. That thesis examined the thermolysis reaction of AdoCbi(+)BF(4)(-) in ethylene glycol solution with exogenous bases, N-methylimidazole (N-Me-Im) and the sterically hindered 1,2-dimethylimidazole, (1,2-Me(2)-Im), 2-methylpyridine (2-Me-py), and 2,6-dimethylpyridine (2,6-Me(2)-py). In the present work, multiple purities of each base have been utilized as a check to see if impurities in the nitrogenous bases are causing the observed homolysis and heterolysis product distributions as others have implied (Trommel, J. S.; Warncke, K.; Marzilli, L. G. J. Am. Chem. Soc. 2001, 123, 3358). The "impurity hypothesis" is disproven by a series of results, including the following: N-Me-Im displays an invariant 52 +/- 10% heterolysis and the 1,2-Me(2)-Im system displays an invariant 83 +/- 7% heterolysis as a function of different base purification methods. Moreover, 2-Me-py and 2,6-Me(2)-py also display an invariant approximately 16 +/- 5% heterolysis as a function of different purification methods. What is responsible for the high levels of Co-C heterolysis in the AdoCbi(+) plus sterically bulky base thermolyses was uncovered via a revisitation of our four, earlier alternative hypotheses for the enhanced Co-C heterolysis (Sirovatka, J. M.; Finke, R. G. Inorg. Chem. 1999, 38, 1697). Our prior number one alternative hypothesis is shown to be correct: the added bases simply deprotonate the ethylene glycol solvent, forming ethylene glycolate anion and base-H(+)() as the key agents behind the previously ill-understood Co-C heterolyses. Also reported are Co(II)Cbi(+) titrations with five bases (1,2-Me(2)-Im, N-Me-Im, pyridine, 2-MePy, and 2,6-Me(2)-py). These experiments confirm Marzilli and co-workers' (op. cit.) results by showing that sterically hindered bases do not bind to Co(II)Cbi(+); therefore, Co(II)Cbi(+) EPR literature showing binding of bulky pyridines is erroneous as is the previously reported binding of bulky pyridine bases to Co(II)Cbi(+) by UV-vis spectroscopy (Sirovatka, J. Ph.D. Thesis, op. cit.). Also reported is our current best synthesis and purification of AdoCbi(+)BF(4)(-), work that builds off our 1987 synthesis of AdoCbi(+)BF(4)(-) (Hay, B. P.; Finke, R. G. J. Am. Chem. Soc. 1987, 109, 8012). Finally, the multiple, compounding errors which have caused problems in this project are listed, notably errors in the protein X-ray crystallography literature, the EXAFS literature, the Co(II)Cbi(+) plus bulky-bases EPR literature, the misleading B(12)-model literature, the erroneous experimental work (Sirovatka, op. cit.) and thus incorrect conclusions in one of our prior papers, as well as the erroneous implications in parts of the Marzilli and co-workers paper (op. cit.). It is hoped that a forthright reporting of these errors will help others avoid similar mistakes in the future when studying complex, bioinorganic systems.     

Synthesis and Magnetic Properties of Novel Azamacrocyclic LnIII,CuII, FeIII,and SrII Complexes and Conformational Analysis of the Ligands

Hexaalkoxy‐substituted azamacrocyclic metal complexes 1 · MX_n [MX_n = FeCl₃, CuCl₂, SrCl₂, Ln(NO₃)₃; Ln = La, Pr, Eu, Ho, Er] with various chain lengths were prepared by a convergent approach using 1,2‐bisalkoxy‐4,5‐diamines 3 and 4‐alkoxy‐pyridine‐2,6‐dicarbaldehydes 4 as key building blocks for template‐assisted cyclocondensation. Metal complexes 1 · MX_n were considered as potential metallomesogens. However, differential scanning calorimetry and optical polarizing microscopy of 1 · MX_n did not reveal any mesomorphism. The magnetic susceptibility shows deviation from Curie‐like behavior. Due to ligand field effects the effective magnetic moments are a function of the temperature. In order to obtain structural informations on the free ligand 1 , which is synthetically not accessible, theoretical calculations were carried out. For the free azamacrocycle 2a and the free hexamethoxy‐substituted azamacrocycle 1a the IR spectra were computed at the level of density functional theory. A planar and a saddle‐shaped conformation was considered. The IR spectra and especially the dependence of the C=N vibration on the structural parameters and the charge distribution are discussed.     

Synthesis of Tetraarylethene Luminogens by C−H Vinylation of Aromatic Compounds with Triazenes

Tetraarylethenes are obtained by acid-induced coupling of vinyl triazenes with aromatic compounds. This new C−H activation route for the synthesis of aggregation-induced emission luminogens is simple, fast, and versatile. It allows the direct grafting of triarylethenyl groups onto a variety of aromatic compounds, including heterocycles, supramolecular hosts, biologically relevant molecules, and commercial polymers.     

Visualization of Protein‐Specific Glycosylation inside Living Cells

Protein glycosylation is a ubiquitous post‐translational modification that is involved in the regulation of many aspects of protein function. In order to uncover the biological roles of this modification, imaging the glycosylation state of specific proteins within living cells would be of fundamental importance. To date, however, this has not been achieved. Herein, we demonstrate protein‐specific detection of the glycosylation of the intracellular proteins OGT, Foxo1, p53, and Akt1 in living cells. Our generally applicable approach relies on Diels–Alder chemistry to fluorescently label intracellular carbohydrates through metabolic engineering. The target proteins are tagged with enhanced green fluorescent protein (EGFP). Förster resonance energy transfer (FRET) between the EGFP and the glycan‐anchored fluorophore is detected with high contrast even in presence of a large excess of acceptor fluorophores by fluorescence lifetime imaging microscopy (FLIM).     

Nanofilm Low Cost Oxygen Sensors

The resitivity change of ultra thin metals under air exposure is used for vacuum or inert gas packaging control. In order to reach low cost, single use applications, few nm thin Aluminum layers were deposited on PET substrates and combined with wireless electronic readout circuitry.The sensor respose is characterized by resistance changes and explained in terms of multiphase diffusion mechanisms which are very sensitive to technological parameters.     

Density functional study of the adsorption of K on the Cu(111) surface

The adsorption of potassium on the Cu(111) surface in a (2×2) pattern has been simulated with all-electron full-potential density functional calculations. The top site is found to be the preferred adsorption site, with the other highly symmetric adsorption sites being nearly degenerate. The bond length from potassium to the nearest copper atom is computed to be 2.83 ?. Population analysis and density of states indicate that there is no evidence for covalent bonding so that the binding mechanism appears to be a metallic bond. Received 11 April 2001     

Screen Printable Sol-Gel Materials for High-Throughput Borosilicate Glass Film Production

The use of sol-gel materials can simplify the industrial fabrication of high-efficiency silicon solar cells if a suitable deposition method is established. In this work, we investigate the possibilities to adapt a borosilicate glass sol-gel to provide a stable screen printing process. This material has previously been used as a boron dopant source for silicon solar cells. We now use an adjusted synthesis process, with an increased gelling time and different additives. This changes the rheological properties (i.e., the elastic and viscous moduli G′ and G″) in a way that avoids the dripping of paste through the screen and that stabilizes the material transfer in subsequent printing steps. Using this synthesis process, we were able to show a printing process with long-term stability of more than 500 prints. When comparing the adjusted to the initial paste, we show that, after thermal treatment, the obtained thin films are very similar in terms of their constitution, with a refractive index between n = 1.47 (initial) and n = 1.55 (adjusted). We also show that they provide the same amount of doping under the tested conditions (950 °C, 30 min), resulting in sheet resistances of R_□ = (42.5 ± 2.6) Ω/□ (initial) and R_□ = (46.4 ± 3.6) Ω/□ (adjusted).     

Atomistic modeling of thermodynamic equilibrium and polymorphism of iron

We develop two new modified embedded-atom method (MEAM) potentials for elemental iron, intended to reproduce the experimental phase stability with respect to both temperature and pressure. These simple interatomic potentials are fitted to a wide variety of material properties of bcc iron in close agreement with experiments. Numerous defect properties of bcc iron and bulk properties of the two close-packed structures calculated with these models are in reasonable agreement with the available first-principles calculations and experiments. Performance at finite temperatures of these models has also been examined using Monte Carlo simulations. We attempt to reproduce the experimental iron polymorphism at finite temperature by means of free energy computations, similar to the procedure previously pursued by Müller et al (2007 J. Phys.: Condens. Matter 19 326220), and re-examine the adequacy of the conclusion drawn in the study by addressing two critical aspects missing in their analysis: (i) the stability of the hcp structure relative to the bcc and fcc structures and (ii) the compatibility between the temperature and pressure dependences of the phase stability. Using two MEAM potentials, we are able to represent all of the observed structural phase transitions in iron. We discuss that the correct reproductions of the phase stability among three crystal structures of iron with respect to both temperature and pressure are incompatible with each other due to the lack of magnetic effects in this class of empirical interatomic potential models. The MEAM potentials developed in this study correctly predict, in the bcc structure, the self-interstitial in the (110) orientation to be the most stable configuration, and the screw dislocation to have a non-degenerate core structure, in contrast to many embedded-atom method potentials for bcc iron in the literature.     

Sterically Active Electron Pairs in Lead Sulfide? An Investigation of the Electronic and Vibrational Properties of PbS in the Transition Region Between the Rock Salt and the α-GeTe-Type Modifications

Recently, we have investigated the energy landscape of PbS for many different pressures on the ab initio level by using Hartree-Fock and density functional theory to globally search for possible thermodynamically stable and metastable structures. The perhaps most fascinating observation was that besides the experimentally known modification exhibiting the rock salt structure a second minimum exists close-by on the landscape showing the low-temperature α-GeTe-type structure. In the present study, we investigate the possible reasons for the existence of this metastable modification; in particular we address the question, whether the α-GeTe-type modification might be stabilized (and conversely the rock salt modification destabilized) by steric effects of the non-bonding electron pair.