Palladium complexes with meso-bioxazoline ligands for alternating styrene/CO copolymerisation: Counterion effect

Two sets of mono- and dicationic palladium complexes (8) and (10), having and as counterions, were synthesised. The interionic structure of the methyl-acetonitrile complexes [Pd((R,S)-Bn-Box)(CH₃)(NCCH₃)](X) (8) in solution, was investigated by pulsed-gradient spin-echo (PGSE) diffusion measurements and (¹H, ¹⁹F)-HOESY NMR spectroscopy. A high degree of ion-pairing was found in each complex. The HOESY spectra showed that the and anions take up selective positions, on the side of the complex remote from the benzyl groups, but close to the acetonitrile ligand, while the triflate is, partially, occupying a pseudo fifth coordination position on the side of the cation remote from the two benzyl-groups. The complexes 8 and 10 were used as catalyst precursors for the copolymerisation of styrene with carbon monoxide, producing syndiotactic copolymers, with the exception of complex 10a, that led to isotactic copolymers.     

PECVD of amorphous hydrogenated oxygenated nitrogenated carbon films

An actinometric optical emission spectroscopy (AOES) study of the trends in the concentrations of the plasma species H, CH, CO, OH, and CN in film-producing glow discharges of mixtures of isopropanol and nitrogen was undertaken. Conventional AOES was used to obtain the trends in the plasma concentrations of these species as a function of the proportion of nitrogen in the feed, R_n. A dynamic variant of actinometry in which trends in the concentrations of plasma species are measured as a function of time following the cutting of one of the principal gas flows was also employed to investigate the relative importance of gas phase and plasma/polymer–surface interactions in the production of the species of interest. Each of the above-mentioned species is produced, to some degree, by plasma/polymer–surface reactions. As revealed by transmission infrared spectroscopy, the films deposited contain C H, CO, and O H groups. For R_n > 0, the films become nitrogenated, with both N H and CN groups being present. As revealed by transmission ultraviolet-visible spectroscopy, both the optical gap and the refractive index of the deposited films decrease as R_n is increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1881–1888, 1998     

Sterically stabilized water based magnetic fluids: Synthesis,structure and properties

Magnetic fluids (MFs), prepared by chemical co-precipitation followed by double layer steric and electrostatic (combined) stabilization of magnetite nanoparticles dispersed in water, are presented. Several combinations of surfactants with different chain lengths (lauric acid (LA), myristic acid (MA), oleic acid (OA) and dodecyl-benzene-sulphonic acid (DBS)) were used, such as LA+LA, MA+MA, LA+DBS, MA+DBS, OA+DBS, OA+OA and DBS+DBS. Static light scattering, transmission electron microscopy, small angle neutron scattering, magnetic and magneto-rheological measurements revealed that MFs with MA+MA or LA+LA biocompatible double layer covered magnetite nanoparticles are the most stable colloidal systems among the investigated samples, and thus suitable for biomedical applications.     

Hybrid polymeric latexes containing magnetite

The work describes a study for preparing polystyrene (PSt) and polymethyl methacrylate (PMMA) latex, containing magnetite (Fe₃O₄), covalently bounded to the polymeric chains. The magnetite was functionalized with various alkoxysilanes containing double bonds: vinyltriethoxysilane (VTES), methacryloyl propyl trimethoxysilane (MPTS) and vinyldimethylethoxysilane (VMe₂TES). The ferrite-silane composite forms higher average size particles with MPTS than with VTES. Ferrite functionalized with VMe₂TES forms stable latexes with both PSt and PMMA polymers. PSt forms also stable latexes with ferrite functionalized with VTES but unstable with ferrite functionalized with MPTS.     

Occurrence of organochlorine pesticides and polychlorinated biphenyls in soils and sediments from Eastern Romania

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs), such as DDT and analogues, hexachlorocyclohexane (HCH) isomers and hexachlorobenzene (HCB), were measured in surface soils and sediments from Eastern Romania. Thirty-nine soil samples from the forested zone, eight soil samples from a municipal waste-disposal site, and 10 sediment samples from the Bahlui River along the Iassy city were analysed using accelerated solvent extraction (ASE) and gas chromatography coupled to electron capture detection or mass spectrometry. The low mean concentrations of OCPs (11–31 and 22–84?ng?g^?1 for HCHs and DDTs, respectively) and PCBs (8–43?ng?g^?1) in soil samples from the forested zone suggest that contamination at most of these sites occurred predominantly through atmospheric transport from zones where these compounds were used and subsequently through atmospheric deposition. Contrarily, soil samples collected in the vicinity of a waste-disposal site near Iassy contained higher mean levels of PCBs (278?ng?g^?1, range 34–1132?ng?g^?1) than OCPs (6 and 101?ng?g^?1 of soil for HCHs and DDTs, respectively). The sediment samples collected along the Bahlui river throughout the Iassy city revealed higher mean levels of PCBs (59?ng?g^?1, range 24–158?ng?g^?1) compared with OCP levels (2 and 37?ng?g^?1 of soil for HCHs and DDTs, respectively). Furthermore, PCB profiles and concentrations in the sediment samples varied considerably along the river due to a wide variety of sources, such as different industries and waste sites. Although their sources are difficult to evaluate, the presence of POPs at most sites (especially at the waste-disposal site) may constitute a potential health hazard.     

Magnetic properties of xFe2O3(1−x)[B2O3 · PbO] glasses

The magnetic measurements performed on xFe₂O₃(1-x)[B₂O₃ · PbO] glasses show that for x 5 mol.% Fe₂O₃ the thermal variation of reciprocal susceptibility obeys a Curie behaviour. For higher iron content, at T 50 K, a nonlinear variation, typical for systems with random distribution of exchange interactions is observed. At greater temperatures than 50 K a Curie-Weiss behaviour is shown. The composition dependence of the Curie constants is analysed in correlation with the number of Fe³⁺ and Fe²⁺ ions as determined from Mössbauer effect measurements. A comparison with the data obtained in case of xFe₂O₃(1-x)[3B₂O₃ · PbO] glasses is made.     

Reinforcement of hydroxypropylcellulose films by cellulose nanocrystals in the presence of surfactants

Hydroxypropylcellulose (HPC) films were prepared by casting with cellulose nanocrystals in the presence of anionic surfactant sodium dodecylsulphate (SDS) and cationic surfactant hexadecyltrimethyl ammonium bromide (CTAB). The cellulose nanocrystals were isolated from maize straw, a biomass source produced in huge quantities as an agrowaste in Brazil. These bionanocomposite films had good transparency and their surface hydrophilic character was evidenced by static contact angle measurements. Thermogravimetry (TGA) measurement revealed that nanocrystals and surfactants changed the thermal stability of the HPC films. Dynamic mechanical analysis (DMA) showed that the tensile storage and loss moduli of the HPC films increased by increasing the contents of cellulose nanocrystals and surfactants, especially in the case of CTAB. This good reinforcing effect of HPC matrix can be explained as due to electrostatic attractive interactions brought about by the presence of CTAB and the nanocrystals.     

Effective Permittivity of a Multi-Phase System: Nanoparticle-Doped Polymer-Dispersed Liquid Crystal Films

This paper studies the effective dielectric properties of heterogeneous materials of the type particle inclusions in a host medium, using the Maxwell Garnet and the Bruggeman theory. The results of the theories are applied at polymer-dispersed liquid crystal (PDLC) films, nanoparticles (NP)-doped LCs, and developed for NP-doped PDLC films. The effective permittivity of the composite was simulated at sufficiently high frequency, where the permittivity is constant, obtaining results on its dependency on the constituents’ permittivity and concentrations. The two models are compared and discussed. The method used for simulating the doped PDLC retains its general character and can be applied for other similar multiphase composites. The methods can be used to calculate the effective permittivity of a LC composite, or, in the case of a composite in which one of the phases has an unknown permittivity, to extract it from the measured composite permittivity. The obtained data are necessary in the design of the electrical circuits.     

The effects of grape seeds polyphenols on SKH-1 mice skin irradiated with multiple doses of UV-B

The study investigated the protective activity of red grape seeds (Vitis vinifera L, Burgund Mare variety) (BM) extracts in vivo on multiple doses of ultraviolet radiation (UV)-B-induced deleterious effects in SKH-1 mice skin. Eighty 8-weeks-old female SKH-1 mice were divided into 8 groups: control, vehicle, UV-B irradiated, vehicle+UV-B irradiated, BM 2.5mg polyphenols (PF)/cm(2)+UV-B irradiated, BM 4 mg PF/cm(2)+UV-B irradiated, UV-B+BM 2.5mg PF/cm(2), UV-B+BM 4 mg PF/cm(2). The extract was applied topically before or after each UV-B exposure (240 mJ/cm(2)), for 10 days consecutively. The antioxidant activity of BM extract is higher than gallic acid (k(BM)=0.017, k(gallic acid)=0.013). Multiple doses of UV-B generated the formation of cyclobutane pyrimidine dimers (CPDs) and sunburn cells, increased glutathione peroxidase (GPx) and catalase (CAT) activities respectively glutathione (GSH) and IL-1β levels in skin. In group treated with 2.5mg PF/cm(2) before UV-B irradiation BM extract inhibited UV-B-induced sunburn cells, restored the superoxide dismutase (MnSOD) activity, increased insignificantly CAT and GPx activities and reduced IL-1β level. The BM 4.0 mg PF/cm(2) treatment decreased GSH level and reduced the percentage of CPDs positive cells in skin. Both doses of BM extract administered after UV-B irradiation increased the MnSOD and GPx activities and reduced the formation of sunburn cells in skin. Our results suggest that BM extract might be a potential chemo-preventive candidate in reducing the oxidative stress and apoptosis induced by multiple doses of UV-B in skin.     

Investigation of thermal decomposition of yttrium–aluminum-based precursors for YAG phosphors

Three types of precursors were prepared using the wet-chemical synthesis route, starting from yttrium?Ceuropium?Caluminum nitrate solution and different precipitating agents (urea, oxalic acid, and ammonium carbonate). The precursors were fired at 1200?°C in nitrogen atmosphere in order to obtain europium-doped yttrium aluminate Y₃Al₅O₁₂:Eu³⁺ phosphor with garnet structure (YAG:Eu). The processes involved in the thermal decomposition of precursors and their composition were put in evidence using thermal analysis (TG?CDTA) and FT-IR spectroscopy. The GA?CDTA curves possess typical features for basic-oxalate, -nitrate, and -carbonates as formed with oxalic acid, urea, and ammonium carbonate, respectively. Correlation between the thermal decomposition steps, mass loss, and composition of gases evolved during the thermal treatment was established using TG?CDTA?CFT-IR coupling. It was found that the different composition of precursors reflects on the luminescent characteristics of the corresponding phosphors. Urea and ammonium carbonate lead to the formation of YAG type phosphors, with garnet structure and specific red emission. As for the oxalic acid, this precipitating agent generates a non-homogeneous powder that contains yttrium oxide as impurity phase. This phosphor is a mixture of Y₂O₃:Eu³⁺, Y₄Al₂O₉:Eu³⁺, and Y₃Al₅O₁₂:Eu³⁺ that explain the relative higher emission intensity.