Structural and optical properties of ZnO thin films by the spin coating Sol-Gel method

ZnO thin films were deposited onto glass subsrates by a Sol-gel spin coating method. The structural and optical properties of ZnO thin films were investigated. The molar ratios of the zinc acetate dihydrate to Monoethanolamine were maintained 1:1. The as-grown film was sintered 250 °C for 10 min, then annealed in air at 500 °C for 30 min. The XRD results indicate that ZnO films were strongly oriented to the c-axis of the hexagonal nature. Absorption measurements were carried out as a function of temperature with 10 K steps in the range 10–320 K. The band gap energy was measured 3.275 and 3.267 eV for 0.5 and 1.0 molarity (M) ZnO thin films at 300 K. The steepness parameters were observed between 10 and 320 K and their extrapolations converged at (E₀, α₀) = 3.65 eV, 172,819 cm⁻¹ and 3.70 eV, 653,436 cm⁻¹ for 0.5 and 1.0 M ZnO thin films, respectively.     

Comparative Study of Biosorption of Heavy Metals Using Living Green Algae Scenedesmus quadricauda and Neochloris pseudoalveolaris: Equilibrium and Kinetics

The biosorption of several heavy metals such as cobalt(II), chromium(III), lead(II), cadmium(II), nickel(II), and manganese(II) from aqueous systems on living microalgae cultures, Scenedesmus quadricauda and Neochloris pseudoalveolaris were studied under laboratories conditions. The kinetic and statistical parameters were calculated by using the data obtained from batch cultivation and well fitted a pseudo-first-order rate equation. The initial metal concentrations in solution were about 5–40 mg · L^?1. According to the pseudo-second-order model, the biosorption capacities of Scenedesmus quadricauda for Co(II), Cr(III), Pb(II), Cd(II), Ni(II), and Mn(II) ions were found in the ranges of 2.14–52.48, 1.98–81.98, 8.05–4.26, 7.81–24.96, 2.17–55.71, and 3.54–75.20 mg g^?1, respectively. Kinetic studies revealed that the metal uptake capacity of each living green algae was rather fast. It was also observed that the biosorption kinetic rate decreased with increasing concentration for both microalgae. The application of diffusion-controlled models to the experimental results indicated that the contribution of intraparticle diffusion to the overall sorption kinetics was not very important. Results showed that Co(II), Cr(III), Pb(II), Cd(II), Ni(II), and Mn(II) ions could effectively be absorbed by using living microalga cultures from aqueous solutions.     

Reactivity of acyclic (pentadienyl)iron(1+) cations: synthetic studies directed toward the frondosins

A short, 4-step route to the scaffold of frondosin A and B is reported. The [1-methoxycarbonyl-5-(2',5'-dimethoxyphenyl)pentadienyl]Fe(CO)(3)(+) cation was prepared in two steps from (methyl 6-oxo-2,4-hexadienoate)Fe(CO)(3). Reaction of this cation with isopropenyl Grignard or cyclohexenyllithium reagents affords (2-alkenyl-5-aryl-1-methoxycarbonyl-3-pentene-1,5-diyl)Fe(CO)(3) along with other addition products. Oxidative decomplexation of these (pentenediyl)iron complexes, utilizing CuCl(2), affords 6-aryl-3-methoxycarbonyl-1,4-cycloheptadienes via the presumed intermediacy of a cis-divinylcyclopropane.     

Review of time lag permeation technique as a method for characterisation of porous media and membranes

The time lag permeation technique has proven to bean effective method for characterisation. Because of the simple nature of the permeation experiment, transport parameters can be directly obtained from experimental data hence avoiding the intensive mathematical treatment required by other techniques. The method has historically been applied to diffusion and adsorption in porous membranes and diffusion in polymer membranes. Since its origins in 1920, interest in the time lag method has expanded because of its value in characterising simple permeation processes and also complex systems of diffusion with simultaneous adsorption and surface diffusion. This review focuses on presenting the asymptotic solution of the mass balance diffusion equations and includes applications of time lag analysis, in order to give a critical and broad perspective of this method as a tool for characterisation. It includes much of the previously published literature in order to show that for most cases the asymptotic solution of the transport equations is simple, and for more complex cases that an analytical solution is possible hence avoiding cumbersome numerical techniques.     

Organic Positive Materials for Magnesium Batteries: A Review

Magnesium batteries, like lithium-ion batteries, with higher abundance and similar efficiency, have drawn great interest for large-scale applications such as electric vehicles, grid energy storage and many more. On the other hand, the use of organic electrode materials allows high energy-performance, metal-free, environmentally friendly, versatile, lightweight, and economically efficient magnesium storage devices. In particular, the structural diversity and the simple activity of organic molecules make redox properties, and hence battery efficiency, easy to monitor. While organic magnesium batteries still in their infancy, this field becomes more and more promising because significant results were reported. To summarize the achievements in studies on organic cathodes for magnesium systems, their synthesis is discussed, combined with electrode design to provide the basis for controlling the electrochemical properties. Moreover, the techniques to synthesize organic materials with high-yield are mentioned. Finally, potential problems and prospects are explored to further improve organic cathodes.     

Corrosion prevention of mild steel in acidic medium by 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid: Theoretical and experimental approach

The inhibition efficiency of 2-Pyrrolidin-1-yl-1,3-thiazole-5-carboxylic acid (PTCA) against mild steel (MS) corrosion was investigated in acidic solution by using quantum chemical calculations based on Density Functional Theory (DFT) method and electrochemical measurements. The electrochemical impedance spectroscopy (EIS), potentiodynamic, potential zero charge (pzc) analysis and electrochemical noise (EN) measurements at various concentrations (from 0.1 to 10 mM) and immersion times were utilized in experimental part. The surface analysis was achieved scanning electron microscope (SEM) and contact angle measurements in the absence and presence of 10 mM PTCA. According to DFT results, PTCA exhibited 3.737 eV band gap and 8.130 Debye dipole moment which were a signal of potentially convenient corrosion inhibitor properties. PTCA has a remarkable corrosion inhibition capability to mild steel, which inhibited both anodic and cathodic corrosion rates, relying on it's physically adsorption on the metal solution interface and protection ability was increased with increasing PTCA concentration. The obtained adsorption equilibrium constant was 11.11 × 10³ M^-1 and calculated standard free energy of adsorption was ?33.03 kJ mol^?1. The determined activation energy values were 55.58 kJ mol^?1 and 96.86 kJ mol^?1 in 0.5 M HCl in the absence and presence of 10 mM PTCA, respectively. PTCA demonstrated a strong inhibition efficiency of 98.3%, after 168 h immersion, according to the EIS results. As a consequently, we recommend that PTCA is a convenient inhibitor in 0.1 M HCl for mild steel protection against corrosion.     

Dications of benzylidenefluorene and diphenylmethylidene fluorene: the relationship between magnetic and energetic measures of antiaromaticity

Oxidation of m- and p-substituted benzylidene fluorenes to antiaromatic dications was attempted by electrochemical and chemical means. Electrochemical oxidation to dications was successful for benzylidene fluorenes with p-methoxy, p-methyl, p-fluoro, and unsubstituted phenyl rings in the 3-position; attempts to oxidize the m-substituted derivatives via electrochemistry were unsuccessful. Chemical oxidation with SbF(5)/SO(2)ClF gave the dication of 9-[(4-methoxyphenyl)methylene]-9H-fluorene cleanly; oxidation of all other substituted benzylidene fluorenes resulted in mixtures of products. The excellent linear relationship between the chemical shifts calculated by the GIAO method and the experimental shifts for the p-methoxy-substituted benzylidene fluorene dication suggests that the calculations satisfactorily reflect the magnetic properties of this dication and potentially those of the other dications studied. The redox potentials from electrochemical oxidation, a measure of the stability of the dications, showed a good linear relationship with another measure of stability, the calculated difference in energy between each dication and its neutral precursor. The dications of benzylidene fluorenes were less stable than the dications of diphenylmethylidene fluorenes; within each type of compound, dications with p-substituted phenyl rings were more stable than dications with m-substituted phenyl rings and dications with phenyl rings substituted with electron-donating groups were more stable than dications with phenyl rings substituted with electron-withdrawing groups. The antiaromaticity of the fluorenyl system was assessed through the nucleus-independent chemical shift (NICS) that was also calculated by the GIAO method. The plot of the NICS values per square area versus the calculated energy difference for the dications showed a moderate degree of linearity; the plot of NICS values per square area versus the oxidation potentials was less linear. Thus, a suggestive, but not conclusive, relationship between magnetic and energetic measures of antiaromaticity was observed.     

Fast determination of the tin content in cassiterite ores by photon activation method

Photon activation analysis has been success-fully applied to the fast and non-destructive analysis of tin in cassiterite ores based on the 159.7 keV gamma line of^123mSn produced in the¹²⁴Sn/γ, n/^123mSn reaction. In order to improve the accuracy of analytical results, corrections for self-absorption and pile-up effects were performed. Under typical conditions /15 μA electron beam current, 15 MeV bremsstrahlung energy, 5 min irradiation time and 10 min measurement/ the sensitivity of the analysis is 10 ppm. The proposed method can be used for routine analysis of tin in geological samples.