Supertetrahedral Networks and Lithium‐Ion Mobility in Li2SiP2 and LiSi2P3

The new phosphidosilicates Li₂SiP₂ and LiSi₂P₃ were synthesized by heating the elements at 1123 K and characterized by single‐crystal X‐ray diffraction. Li₂SiP₂ (I4₁/acd, Z=32, a=12.111(1) Å, c=18.658(2) Å) contains two interpenetrating diamond‐like tetrahedral networks consisting of corner‐sharing T2 supertetrahedra [(SiP_4/2)₄]. Sphalerite‐like interpenetrating networks of uniquely bridged T4 and T5 supertetrahedra make up the complex structure of LiSi₂P₃ (I4₁/a, Z=100, a=18.4757(3) Å, c=35.0982(6) Å). The lithium ions are located in the open spaces between the supertetrahedra and coordinated by four to six phosphorus atoms. Temperature‐dependent ⁷Li solid‐state MAS NMR spectroscopic data indicate high mobility of the Li⁺ ions with low activation energies of 0.10 eV in Li₂SiP₂ and 0.07 eV in LiSi₂P₃.     

Electrochemical current rectifier as a highly sensitive and selective cytosensor for cancer cell detection

Signal amplification originating from electrochemical current rectifier (ECR) was firstly applied to construct a cytosensor for rapid and non-invasive detection of folate receptor-rich cancer cells with high sensitivity. It exhibits a broad linear range with a detection limit as low as 10 cells mL(-1) even in the presence of a large number of normal cells.     

Surface investigation of intermetallic PdGa(111)

The intermetallic PdGa is a highly selective and potent catalyst in the semihydrogenation of acetylene, which is attributed to the surface stability and isolated Pd atom ensembles. In this context PdGa single crystals of form B with (111) orientation were investigated by means of X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), scanning tunneling microscopy (STM), X-ray photoelectron diffraction (XPD), and low-energy electron diffraction (LEED) to study the electronic and geometric properties of this surface. UPS and thermal desorption spectroscopy (TDS) were used to probe the chemisorption behavior of CO. The PdGa(111) surface exhibits a (1 × 1) LEED and a pronounced XPD pattern indicating an unreconstructed bulk-truncated surface. Low-temperature STM reveals a smooth surface with a (1 × 1) unit cell. No segregation occurs, and no impurities are detected by XPS. The electronic structure and the CO adsorption properties reveal PdGa(111) to be a bulk-truncated intermetallic compound with Pd-Ga partial covalent bonding.     

Characterization of dielectric barrier electrospray ionization for mass spectrometric detection

A novel electrospray interface is presented which induces an electric field by dielectric polarization through a non-conductive barrier. Therefore, a square-wave high-voltage signal is applied. This technique allows mass spectrometric measurements in the positive as well as in the negative mass spectrometry mode without changing the polarity of the potential applied, and it decreases the risk of undesired discharges, induced by high electric currents. The applicability of this technique is demonstrated by mass spectrometric determination of reserpine.     

The first example of a nitrile hydratase model complex that reversibly binds nitriles

Nitrile hydratase (NHase) is an iron-containing metalloenzyme that converts nitriles to amides. The mechanism by which this biochemical reaction occurs is unknown. One mechanism that has been proposed involves nucleophilic attack of an Fe-bound nitrile by water (or hydroxide). Reported herein is a five-coordinate model compound ([Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+)) containing Fe(III) in an environment resembling that of NHase, which reversibly binds a variety of nitriles, alcohols, amines, and thiocyanate. XAS shows that five-coordinate [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) reacts with both methanol and acetonitrile to afford a six-coordinate solvent-bound complex. Competitive binding studies demonstrate that MeCN preferentially binds over ROH, suggesting that nitriles would be capable of displacing the H(2)O coordinated to the iron site of NHase. Thermodynamic parameters were determined for acetonitrile (DeltaH = -6.2(+/-0.2) kcal/mol, DeltaS = -29.4(+/-0.8) eu), benzonitrile (-4.2(+/-0.6) kcal/mol, DeltaS = -18(+/-3) eu), and pyridine (DeltaH = -8(+/-1) kcal/mol, DeltaS = -41(+/-6) eu) binding to [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) using variable-temperature electronic absorption spectroscopy. Ligand exchange kinetics were examined for acetonitrile, iso-propylnitrile, benzonitrile, and 4-tert-butylpyridine using (13)C NMR line-broadening analysis, at a variety of temperatures. Activation parameters for ligand exchange were determined to be DeltaH(+ +) = 7.1(+/-0.8) kcal/mol, DeltaS(+ +) = -10(+/-1) eu (acetonitrile), DeltaH(+ +) = 5.4(+/-0.6) kcal/mol, DeltaS(+ +) = -17(+/-2) eu (iso-propionitrile), DeltaH(+ +) = 4.9(+/-0.8) kcal/mol, DeltaS(+ +) = -20(+/-3) eu (benzonitrile), and DeltaH(+ +) = 4.7(+/-1.4) kcal/mol DeltaS(+ +) = -18(+/-2) eu (4-tert-butylpyridine). The thermodynamic parameters for pyridine binding to a related complex, [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) (DeltaH = -5.9(+/-0.8) kcal/mol, DeltaS = -24(+/-3) eu), are also reported, as well as kinetic parameters for 4-tert-butylpyridine exchange (DeltaH(+ +) = 3.1(+/-0.8) kcal/mol, DeltaS(+ +) = -25(+/-3) eu). These data show for the first time that, when it is contained in a ligand environment similar to that of NHase, Fe(III) is capable of forming a stable complex with nitriles. Also, the rates of ligand exchange demonstrate that low-spin Fe(III) in this ligand environment is more labile than expected. Furthermore, comparison of [Fe(III)(S(2)(Me2)N(3)(Et,Pr))](+) and [Fe(III)(S(2)(Me2)N(3)(Pr,Pr))](+) demonstrates how minor distortions induced by ligand constraints can dramatically alter the reactivity of a metal complex.     

Magnetic and Electrical Properties, Eu Mössbauer Spectroscopy, and Chemical Bonding of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg

Single-phase samples of REAgMg (RE=La, Ce, Eu, Yb) and EuAuMg were prepared by reacting the elements in sealed tantalum tubes in a high-frequency furnace. LaAgMg and CeAgMg adopt the hexagonal ZrNiAl-type structure, while EuAgMg, YbAgMg, and EuAuMg crystallize with the orthorhombic TiNiSi type. Chemical bonding was exemplarily investigatedfor EuAgMg and EuAuMg on the basis of TB-LMTO-ASAcalculations. Magnetic susceptibility measurements indicatePauli paramagnetism for LaAgMg and YbAgMg with room-temperature susceptibilities of 2.4(1)×10⁻⁹ and 1.5(1)×10⁻⁹ m³/mol, respectively. CeAgMg remains paramagnetic down to 2 K. The experimental magnetic moment of 2.52(2) μ_B/Ce above 50 K is compatible with trivalent cerium. EuAgMg and EuAuMg are paramagnetic above 50 K with experimentalmagnetic moments of 7.99(5) μ_B/Eu for the silver and 7.80(5) μ_B/Eu for the gold compound, indicating divalent europium. Ferromagnetic ordering is detected at T_C=22.0(3) K (EuAgMg) and T_C=36.5(5) K (EuAuMg). At 4.2 K and 5 T the saturation magnetizations are 7.1(1) and 7.3(1) μ_B/Eu for EuAgMg and EuAuMg, respectively. According to the very small hysteresis, EuAgMg and EuAuMg may be classified as soft ferromagnets. All compounds are metallic conductors. For EuAgMg and EuAuMg freezing of spin-disorder scattering is observed below T_C. At 78 K ¹⁵¹Eu Mössbauer spectra show isomer shifts of −9.00(4) and −8.72(8) mm/s for EuAgMg and EuAuMg, respectively. Full magnetic hyperfine field splitting is detected at 4.2 K with hyperfine fields of 17.4(1) and 18.3(2) T at the europium nuclei of EuAgMg and EuAuMg.     

Characterization and quantification of metallothionein isoforms by capillary electrophoresis–inductively coupled plasma–isotope-dilution mass spectrometry

In a new approach to the characterization and quantification of metallothionein isoforms an on-line isotope-dilution method in combination with the coupling of capillary electrophoresis (CE) to an inductively coupled plasma-sector field mass spectrometer (ICP-SFMS) is reported. Metallothionein (MT) isoforms are separated by CE and the elements Cu, Zn, Cd, and S are detected simultaneously by use of ICP-SFMS in the medium resolution mode. On-line isotope dilution is performed by continuous introduction of an isotopically enriched, species-unspecific spike solution after the separation step. MT from rabbit liver and a further purified MT-1 isoform were quantified by determination of sulfur, and the stoichiometric compositions of the metalloprotein complexes are characterized by determination of their sulfur-to-metal ratios.