Current Trend in Synthesis,Post‐Synthetic Modifications and Biological Applications of Nanometal‐Organic Frameworks (NMOFs)

Since the early reports of MOFs and their interesting properties, research involving these materials has grown wide in scope and applications. Various synthetic approaches have ensued in view of obtaining materials with optimised properties, the extensive scope of application spanning from energy, gas sorption, catalysis biological applications has meant exponentially evolved over the years. The far‐reaching synthetic and PSM approaches and porosity control possibilities have continued to serve as a motivation for research on these materials. With respect to the biological applications, MOFs have shown promise as good candidates in applications involving drug delivery, BioMOFs, sensing, imaging amongst others. Despite being a while away from successful entry into the market, observed results in sensing, drug delivery, and imaging put these materials on the spot light as candidates poised to usher in a revolution in biology. In this regard, this review article focuses current approaches in synthesis, post functionalization and biological applications of these materials with particular attention on drug delivery, imaging, sensing and BioMOFs.     

二水·2-羰基丙酸水杨酰腙合铜(Ⅱ)配合物的晶体结构及生物活性

在水中,以2-羰基丙酸水杨酰腙与硫酸铜反应,制得新配合物Cu(C₁₀H₈N₂O₄)(H₂O)₂(C₁₀H₈N₂O₄^2-为2-羰基丙酸水杨酰腙负离子),并以水为溶剂培养了单晶,测试了晶体结构,该单晶为深绿色,属单斜晶系,空间群为C2/c,晶胞参数a=1.1297(1)nm,b=0.9824(8)nm,c=2.1973(3)nm,β=91.91(8)°,V=2.43749(8)nm³,Z=8,μ=1.817mm^-1,D_c=1.743Mg·m^-3,F(000)=1304,R=0.0264,wR=0.0654,GOF=1.052。其测试结果表明在配合物中Cu²⁺处于五配位的四方锥配位环境,配位原子分别来自1个三齿配体2-羰基丙酸水杨酰腙负二价离子的2个O原子和1个N原子,2个水分子中的O原子,其中1个水分子的O原子处于四方锥的锥顶,锥底的配位原子基本处于同一平面上。对该配合物所作的皿内抑菌试验和盆栽活体实验表明,配合物对小麦条锈病、白菜黑斑病及辣椒疫霉菌等分别有96%、89%、100%的抑制率,且有一定的助长作用。     

聚砜-尼龙6嵌段共聚物结构的研究

<正> 以金属钠作催化剂合成的聚砜-尼龙6嵌段共聚物对尼龙6的吸水性有一定的改善,而且可以作为聚砜与尼龙共混物的相容剂,但共聚物中聚砜组分的含量都不超过25％。这可能与共聚物的结构有关。近年来的工作表明:反相气相色谱法(IGC)是高聚物结构分析的有用的工具之一。我们试图用反相气相色谱法,通过观察嵌段共聚物     

A spectroscopic study on the 12-heteropolyacids of molybdenum and tungsten (H3PMo12−nWnO40) combined with cetylpyridinium bromide in the epoxidation of cyclopentene

The epoxidation of cyclopentene with hydrogen peroxide catalyzed by 12-heteropolyacids of molybdenum and tungsten (H₃PMo_12−nW_nO₄₀, n = 1–11), 12-tungstophosphoric acid and 12-molybdophosphoric acid combined with cetylpyridinium bromide as a phase transfer reagent was carried out in acetonitrile. Among 13 heteropolyacids investigated, catalyst of H₃PMo₆W₆O₄₀ showed the highest activity, giving a conversion of 60% and a selectivity of 95% in the epoxidation of cyclopentene. The fresh catalysts and the catalysts under reaction condition were characterized by UV–vis, FT-IR and ³¹P NMR spectroscopy, which has revealed that all of the molybdotungstophosphoric acids were degraded in the presence of hydrogen peroxide to form a considerable amount of phosphorus-containing species. The active species resulted from H₃PMo₆W₆O₄₀ are new kinds of phosphorus-containing species, which is different from {PO₄[WO(O₂)₂]₄}³⁻.     

Controlled growth of large-area, uniform, vertically aligned arrays of alpha-Fe2O3 nanobelts and nanowires

Vertically aligned iron oxide nanobelt and nanowire arrays have been synthesized on a large-area surface by direct thermal oxidation of iron substrates under the flow of O(2). The effects of reactive gas pressure, composition, and temperature have been systematically studied. It was found that nanobelts (width, tens of nanometers; thickness, a few nanometers) are produced in the low-temperature region (approximately 700 degrees C) whereas cylindrical nanowires tens of nanometers thick are formed at relatively higher temperatures (approximately 800 degrees C). Both nanobelts and nanowires are mostly bicrystallites with a length of tens of micrometers which grow uniquely along the [110] direction. The growth habits of the nanobelts and nanowires in the two temperature regions indicate the role of growth rate anisotropy and surface energy in dictating the ultimate nanomorphologies.     

锌试剂分光光度法测定壳聚糖含量

利用锌试剂与壳聚糖在一定酸度条件下的特异性显色反应，即其复合物在465nm处吸光度与壳聚糖含量在0～O．04g／L范围内呈现良好的线性关系(R=0．996)，基于此建立了一种简便快速的分光光度法。平均回收率为99．68％。     

杯芳烃的配位化学──Ⅳ.对叔丁基杯[8]芳烃与钙、镉配合物的合成与表征

本文合成了对叔丁基杯[8]芳烃(H₈L)与钙、镉的固体配合物。并以元素分析、核磁共振、热谱、红外谱、紫外谱等进行表征。其配合物的组成分别为Ca(H₆L)·6dmf及Cd(H₆L)·6dmf.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...