Stir bar sorptive extraction based on restricted access material for the direct extraction of caffeine and metabolites in biological fluids

A biocompatible stir bar sorptive extraction (SBSE) device was prepared using an alkyl-diol-silica (ADS) restricted access material (RAM) as the SBSE coating. The RAM-SBSE bar was able to simultaneously fractionate the protein component from a biological sample, while directly extracting caffeine and its metabolites, overcoming the present disadvantages of direct sampling in biological matrices by SBSE, such as fouling of the extraction coating by proteins. Desorption of the analytes was performed by stirring the bar in a water/ACN mixture (3/1, v/v) and subsequently reconcentrating the sample solution in water to enable HPLC-UV analysis to be performed. The limit of detection, based on a signal to noise ratio of 3, for caffeine was 25 ng/mL in plasma. The method was confirmed to be linear over the range of 0.5-100 microg/mL of caffeine with an average linear coefficient (R2) value of 0.9981. The injection repeatability and intra-assay precision of the method were evaluated over ten injections, resulting in a %RSD of approximately 8%. The RAM-SBSE device was robust (>50 extraction in plasma without significant signal loss) and simple to use, providing many direct extractions and subsequent determination of caffeine and its metabolites in biological fluids. In contrast to existing sample preparation methods for the analysis of caffeine and selected metabolites in biological fluids, this feasibility study using a biocompatible SBSE approach was advantageous in terms of simplifying the sample preparation procedures.     

Pseudopartial wetting and precursor film growth in immiscible metal systems

We explore the equilibrium wetting behavior and precursor film growth in pure and alloy metallic systems. The systems exhibit equilibrium "pseudopartial" wetting, that is, a thin film in equilibrium with a nonzero contact angle in both liquid and solid states. The film spreading kinetics clearly indicates a diffusive transport mechanism. The alloying has only a small impact on the equilibrium wetting properties but strongly affects the transport during the growth of the precursor film.     

Perfluoralkyljod-verbindungen: das trifluormethyljod-bis-trifluoracetat CF3J(OCOCF3)2

CF₃I(OCOCF₃)₂ is formed from the reactions of CF₃IF₂ or CF₃IO with trifluoroacetic anhydride at low temperature. During the reaction of CF₃IF₂ with (CF₃CO)₂O CF₃IF(OCOCF₃) is formed as an intermediate product. The preparation, the ¹⁹F-nmr spectra and the thermal decomposition are described.     

Preparation,Structure, and Reactivity of Thioxo and Imino Derivatives of the Triolide (and Pentolide) from (R)-3-Hydroxybutanoic Acid

Reaction of the triolide 1 from (R)-3-hydroxybutanoic acid with Lawesson's reagent 5 leads to the mono-, di-, and trithio derivatives 6–8 which can be isolated in pure form (20–40% yields), and which have crystal structures very similar to the parent triolide 1 (Fig. 1). Similarly, pentolide 3 is converted to mixtures of various thio derivatives, three of which are separated ( 10–12 ) by HPLC and fully characterized. The X-ray structures of the mono- and of one of the dithiopentolides ( 10, 12 ) differ remarkably from each other (Fig. 3). Reduction of the thiotriolides 6–8 (NaBH₄, R₃SnH, Cl₃SiH, Raney-Ni) gives 12-membered rings containing up to three ether groups (chiral crown ethers, 15, 17–19 ) in poor yields. The thiotriolides react spontaneously and in yields of up to 96% with ammonia, certain primary amines, and hydroxylamine to give imine and oxime derivatives with intact 12-membered-ring backbones ( 20, 22–24, 30 , see crystal structures in Figs. 4–7). The rigid structure of all the derivatives of triolide 1 puts the C?O, C?S, and C?NR O-, S-, and N-atoms in juxtaposition (a feature reminiscent of the side chains in the iron-binder enterobactin, Fig. 6). Imines containing PPh₂ groups are prepared ( 30, 33, 35 ) from the thiotriolides and tested as chiral ligands for Pd^II-catalyzed 1,3-diphenyallylations (→ 37 , enantiomer ratio up to 77:23). The reactions described demonstrate that multiple reactions of the triolide 1 from (R)-3-hydroxybutanoic acid which proceed through tetrahedral intermediates are possible without ring opening – the skeleton is remarkably stable, and this might be exploited as a template for bringing up to three pendent substituents into close proximity to allow a study of their interactions and cooperative properties. Also, the di- and trithio derivatives 7 and 8 could be used for cross-linking in molecules containing primary NH₂ groups.     

In situ observations of water production and distribution in an operating H2/O2 PEM fuel cell assembly using 1H NMR microscopy

Proton NMR imaging was used to investigate in situ the distribution of water in a polymer electrolyte membrane fuel cell operating on H2 and O2. In a single experiment, water was monitored in the gas flow channels, the membrane electrode assembly, and in the membrane surrounding the catalysts. Radial gradient diffusion removes water from the catalysts into the surrounding membrane. This research demonstrates the strength of 1H NMR microscopy as an aid for designing fuel cells to optimize water management.     

Diastereoselectivity of the mercuration of acyclic allylic alcohols

The diastereoselectivity of the mercuration of acyclic alkenes $\text{4}$ can be reversed by changing the substituent in the allylic position; with alcohols the erythro isomers $\text{5}$ and with esters or hemiacetals the threo isomers $\text{6}$ and $\text{8}$ are formed predominantly (Table I).     

Untersuchungen über ternäre Chalkogenide. XXIV. Zur Struktur des TlGaSe2

On Ternary Chalcogenides. XXIV. The Structure of TlGaSe₂ TlGaSe₂ is monoclinic with a = 10.772(3), b = 10.771(5), c = 15.636(8) Å, ß = 100.6(3)°, Z = 16, space group Cc. The refinement yielded an R value of 0.082 for 1366 unique observed reflections (MoKα). The compound crystallizes with a layer structure with two anion layers perpendicular to c* in the unit cell. The structural motive of the layers are large corner-linked Ga₄Se₁₀- tetraeder consisting of four corner-linked GaSe₄ tetrahedra. Two adjacent layers are turned relative to each other by 90°. They are kept together by Tl¹⁺ ions, which are situated on straight lines parallel to the edges of the Ga₄Se₁₀ groups. They are surrounded by six selenium atoms forming trigonal-prismatic TlSe₆ polyhedra. 4₂ screw-axes within the layers are the reason for a strongly pronounced pseudo tetragonal symmetry. Different possibilities of stacking cause a onedimensional disorder along the c* direction. The relations between the TlGaSe₂ type and the TlSe type and also the high-pressure modifications of some compounds with the TlGaSe₂ structure are discussed.     

Synthese und thermische Eigenschaften von molekularen Clusterverbindungen zusammengesetzt aus Elementen der Gruppen 11‐13‐16

Syntheses and Thermal Properties of Cluster Molecules, formed from Groups 11‐13‐16 Elements In the presence of PPh₃, CuX (X = Cl, CH₃COO) or AgOC(O)C₆H₅ and GaCl₃ react in THF with S(SiMe₃)₂ or Se(SiMe₃)₂ to yield [Cu₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 1 ), [Cu₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 2 ), [Ag₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 4 ) and [Ag₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 5 ). The use of PⁿPr₂Ph instead of PPh₃ and subsequent layering with n‐hexane leads to the formation of the cluster [Cu₆Ga₈Cl₄Se₁₃(PⁿPr₂Ph)₁₂] ( 3a , 3b ). Reaction of CuCl, GaCl₃ and PⁿPr₃ with Se(SiMe₃)₂ in THF results in the crystallisation of the ionic cluster (HPⁿPr₃)₂[Cu₂Ga₄Cl₄Se₆(PⁿPr₃)₄] ( 6 ). The structures of 1 — 6 were determined by X‐ray single crystal structure analysis. Thermogravimetric measurements of the cluster molecules and powder diffraction patterns of the remaining powders reveal the potential use of them as single source precursor compounds for the synthesis of the related ternary solid state materials.     

Zur Reaktion des Germaniums mit Germaniumtetrachlorid und zur Existenz der Oxidchloride GeOCl2 und GeOCl6 im Gleichgewicht

On the Reaction of Germanium with Germanium Tetrachloride and on the Existence of the Oxidechlorides GeOCl₂ and GeOCl₆ at the Equilibrium The above equilibrium was measured in a Gauge-manometer and the enthalpy of formation and the entropy for GeCl₂,g were derived from these results. From total pressure measurements and transport experiments of GeO₂ with GeCl₄ follows, that the oxidechlorides Ge₂OCl₆ and GeOCl₂ are not present in measurable concentrations, that means the enthalpy of formation of GeOCl₂ must be higher than ?327 kJ · mol^?1.