Preparation of polycrystalline Ti-Al-O films by magnetron sputtering ion plating: constitution, structure and morphology

Ti-Al-O layers were deposited on Si-<100> wafers at 500 °C by means of reactive magnetron sputtering ion plating (R-MSIP). An Al-target was sputtered in rf-mode and a Ti-target in dc-mode simultaneously by an oxygen/argon plasma. The influence of the Al- and Ti-sputter powers on composition, structure, and morphology of the Ti-Al-O layers and the binding states of the components were investigated. The analysis with EPMA, XPS, AES and TEM yielded the following results: Ti-Al-O coatings with different Ti, Al, and O contents in the range of TiO₂ to Al₂O₃ were grown. TEM structure analysis revealed: the pure TiO₂ film consisted of the tetragonal phases rutile and anatase; the two structures were found in the titanium-rich Ti-Al-O film, too, but with significant smaller lattice constants. The aluminium-rich Ti-Al-O film displayed the same cubic structure of γ-Al₂O₃ as determined for the pure Al₂O₃ film, but the lattice constant is significant lower. Evaluation of the TEM pattern of the film with a Ti/Al ratio of 0.8 indicates a hexagonal structure with lattice constants similar to those of κ′-Al₂O₃. All films are nanocrystalline and not textured. Received: 24 June 1996 / Revised: 27 December 1996 / Accepted: 4 January 1997     

Coupling reactions of alpha-(N-carbamoyl)alkylcuprates with enol triflates derived from cyclic beta-keto esters: A facile approach to gamma-carbamoyl-alpha,beta-enoates

alpha-(N-Carbamoylalkyl)cuprates couple with enol triflates derived from carbocyclic and heterocyclic (i.e., piperidinones) beta-keto esters. Product yields are higher with the alkyl(cyano)cuprates [i.e., RCu(CN)Li, 56-93%] than with the dialkylcuprate reagents (i.e., R(2)CuLi.LiCN). An enol nonaflate works as well as the corresponding enol triflate. A facile synthetic route to gamma-amino alpha,beta-enoates not readily prepared from gamma-keto-alpha,beta-enoates is thus established. The gamma-amino-alpha,beta-enoates, available via N-Boc deprotection, can be cyclized to annulated pyrrolin-2-ones.     

Chiral bidentate aminophosphine ligands: synthesis, coordination chemistry and asymmetric catalysis

Chiral aminophosphines Ph2PN(R)(CH2)nN(R)PPh2 1-4 [n= 2, R = CH(CH3)(Ph) 1; n= 3, R = CH(CH2CH3)(Ph) 2, n= 2, R = CH(CH3)(1-naphthyl) 3; n= 2, R = CH(CH3)(C6H11) 4] were synthesized by the reaction of ClPPh2 with the appropriate easily accessible enantiopure amine building blocks. For compounds 1 and 2, the corresponding selenides 5 and 6 were prepared to determine the electronic character of the phosphine moieties. By reaction of 1 with either PdCl2(cod) or PdCl(CH3)(cod) the cis-complexes 7 and 8 were obtained. The molecular structure for complex 7, cis-[PdCl2(1)], was determined by X-ray crystallography. Reaction of PtCl2(cod) with 1 or 2 yielded the corresponding monomeric cis-isomers 9 and 10. The rhodium derivative [RhCl(CO)(1)] (11) was obtained as a mixture of cis and trans-isomers. Preliminary results in the rhodium catalyzed hydroformylation of styrene and vinyl acetate, with ee's up to 51% and high regioselectivities, showed the potential of these chiral aminophosphines for homogeneous catalysis.     

Reaktionen an komplexgebundenen liganden: XXIX. Ein einfacher weg zu azomethin-komplexen: Kondensation von chrom—, molybdän—, wolfram—, mangan— und eisen—ammoniak-komplexen und ketonen zu ketimin-komplexen

Treatment of transition-metal—ammonia complexes with ketones yields complexes with RR′CNH ligands. Of particular interest is the stabilization of dialkylketimines such as e.g. (CH₃)₂CNH and C₆H₁₀NH in [M(CO)₅{NHC(CH₃)₂}] or [M(CO)₅ {NHC₆H₁₀}] (M = Cr, Mo, W). The principle of synthesis may be applied to a wide range of different metals and types of complexes, as can be shown by the synthesis of [C₅H₅Mn(CO)₂ {NHC(CH₃)₂}], [C₅H₅Fe(CO)₂{NHC(CH₃)₂}]PF₆, [M(CO)₄L₂] (M = Cr, Mo, W; L = (CH₃)₂CNH, C₆H₁₀NH) and [W(CO)₃(diphos){NHC(CH₃)}₂]. Treatment of [Cr(CO)₅NH₃] with urotropine gives [Cr(CO)₅ {N₄(CH₂)₆}] which is also obtained from [Cr(CO)₅THF] and urotropine. The methods of preparation, reactions and spectroscopic properties of the complexes are reported.     

13C-NMR und konformation eines membran-modifizierenden synthetischen nonadekapeptid-analogons von alamethicin und seiner zwischenstufen

The ¹³C-NMR spectra of the synthetic membrane modifying nonadecapeptide Boc-(Aib-l-Ala)₅-Gly-Ala-Aib-Pro-Ala- Aib-Aib-Glu(OBz)-Gln-OMe (Aib = α-aminoisobutyric acid), and of synthetic intermediates were used for conformational analysis in solution. The assignments of the ¹³C-NMR signals of Aib are based on the magnetic nonequivalence (MNE) of the geminal C_β-signals in asymmetric environment resulting in a shift difference of 0.2–0.5 ppm due to neighbouring chiral residues. More than 4 ppm MNE are observed due to α-helical conformation and about 2.5 ppm for Aib situated in the corners of a rigid β-turn. The Ala-C_α signal is also sensitive to different secondary structures. The C_α signal for C-terminal alanine is found at 49–50 ppm, and for alanine within unordered oligopeptides it absorbs at 50–51 ppm. α-Helical environment shifts the Ala-C_α signal to lower field down to 54 ppm. In methanolic solution the nonadecapeptide shows a α-helical N-terminal region. For the C-terminus beginning with proline-14 no periodically ordered conformation is observed, and we suggest a sequence of β-turns. Furthermore the typical E/Z isomerism of the prolyl-peptide bond can be observed on proline itself and on its neighbour alanine.     

Aminierende reduktive Kupplung aromatischer Aldehyde mit niervalenten Titan-Reagenzien zu 1,2-Diarylethylendiaminen

Preparation of 1,2-Diarylethylenediamines by Aminative Reductive Coupling of Aromatic Aldehydes with Low-Valent Titanium Reagents In a novel McMurry- Type one-pot reaction, aromatic aldehydes and secondary amines are poupled of give the N, N, N′, N′-tetraalkyl-1,2-diarylethylendiamines 1–22 (Table 3). To this end, a lithium dialkylamide is added to an aromatic aldehyde to give the adduct B which is then treated with 1 equiv. of TiC1₄ to yield a coloured suspension of a reagent synthetically equivalent to a iminium salt ( C/D in Scheme 4). After treatment with a low-valent Ti reagent which is prepared by reduction of TiC1₄ with either K or, preferably, Mg, the coupling products are isolated in 23 to 81% yield as a 1:1 mixture of the diastereoisomers (meso- and rac-form). These are separated either by chromatography or by crystallization and characterized.     

Präparative chromatographische Enantiomerentrennung von synthetisch nützlichen cyclischen Acetalen

Preparative Chromatographic Resolution of Synthetically Useful Cyclic Acetals Racemic cyclic acetals derived from aldehydes and glycine, glycolic acid, thioglycolic acid, formylacetic acid, and acetoacetic acid (oxazolidinones 4 – 13 , dioxolanones 14 , 15 , oxathiolanone 16 , dioxinones 17 – 23 ) are resolved by preparative high-pressure liquid chromatography on silica gel coated with the polymer from N-acryloylphenylalanine ethyl ester (Chiraspher®). The separation factors α range from1,1 to 2,4. Use of a Prepbar®-chromatography system allows injection of several grams at a time. The enantiomeric acetals thus obtained are fully characterized. First application to amino-acid synthesis are mentioned.     

Synthesis of Hexadentate Hexahydro-1,3,5-triazine-Based Ligands and their Copper(I) Complexes

Summary.  Hexadentate ligands were formed by the reaction of primary dimethylaminoethyl- or methoxyethylamines with formaldehyde. The resulting N, N′, N″-functionalized hexahydro-1,3,5-triazines contain pending amino or ether functionalities which are able to coordinate to metals in addition to the ring nitrogen atoms. Both ligands were reacted with CuBr, and novel tricopper clusters were isolated and characterized by X-ray structure analysis. In these compounds a ring nitrogen atom, the pending amino or ether functionality, and two bridging bromine atoms coordinate each of the copper atoms. Received January 22, 2002; accepted (revised) March 22, 2002     

Perfluoralkyljod-verbindungen: Darstellungen und eigenschaften von CF3JO,CF3JOF2 und CF3JO2

Perfluoroalkyl iodine compounds: preparations and properties of CF₃IO, CF₃IOF₂, and CF₃IO₂. The trifluoromethyl iodine compounds CF₃IO, CF₃IOF₂, and CF₃IO₂ are formed from the reactions of CF₃I, CF₃IF₂ or CF₃IF₄ with ozone or silicon dioxide respectively. Their preparartions, properties, ¹⁹F-nmr spectra, and ir spectra are described.     

Redox behaviour of cysteine in the presence of ammonium trioxovanadate(V)

The interaction of ammonium trioxovanadate(V) with cysteine in aqueous solution was studied by cyclic voltammetry and absorption spectroscopy techniques. In the absence of cysteine, the cyclic voltammogram (CV) of ammonium trioxovanadate(V) solution in 0.1 M phosphate buffer (pH 7) gave two peaks at -0.130 V (reversible) and -0.400 V (irreversible). These peaks (-0.130 V, -0.400 V) can be attributed to V(V)/V(IV) and V(IV)/V(III) redox processes, respectively. In the presence of cysteine at low scan rate (40 mV/s), the peak at -0.780 V, which is assigned to the irreversible reduction of free cystine, was observed. In addition, the reduction peak of the disulfidic anion S(2)(2-) was seen at -0.650 V. Under aerobic conditions, the peaks of the disulfidic anion S(2)(2-) and free cystine are well separated. From electronic spectra of ammonium trioxovanadate(V) and cysteine mixtures, LMCT transition associated with V(V)-cyteine complex was obtained at 743 nm. The stoichiometry (ML(2)) and stability constant (log beta(1:2)=6.67) of V(V)-cysteine complex were determined by means of mole ratio method.