Total Synthesis of (−)‐Zampanolide and Structure–Activity Relationship Studies on (−)‐Dactylolide Derivatives

A new total synthesis of the marine macrolide (?)‐zampanolide ( 1 ) and the structurally and stereochemically related non‐natural levorotatory enantiomer of (+)‐dactylolide ( 2 ), that is, ent‐ 2 , has been developed. The synthesis features a high‐yielding, selective intramolecular Horner–Wadsworth–Emmons (HWE) reaction to close the 20‐membered macrolactone ring of 1 and ent‐ 2 . The β‐keto phosphonate/aldehyde precursor for the ring‐closure reaction was obtained by esterification of a ω‐diethylphosphono carboxylic acid fragment and a secondary alcohol fragment incorporating the THP ring that is embedded in the macrocyclic core structure of 1 and ent‐ 2 . THP ring formation was accomplished through a segment coupling Prins‐type cyclization. Employing the same overall strategy, 13‐desmethylene‐ent‐ 2 as well as the monocyclic desTHP derivatives of 1 and ent‐ 2 were prepared. Synthetic 1 inhibited human cancer cell growth in vitro with nM IC₅₀ values, while ent‐ 2 , which lacks the diene‐containing hemiaminal‐linked side chain of 1 , is 25‐ to 260‐fold less active. 13‐Desmethylene‐ent‐ 2 as well as the reduced versions of ent‐ 2 and 13‐desmethylene‐ent‐ 2 all showed similar cellular activity as ent‐ 2 itself. The same activity level was attained by the monocyclic desTHP derivative of 1 . Oxidation of the aldehyde functionality of ent‐ 2 gave a carboxylic acid that was converted into the corresponding N‐hexyl amide. The latter showed only μM antiproliferative activity, thus being several hundred‐fold less potent than 1 .     

A very efficient,copper-free palladium catalyst for the Sonogashira reaction with aryl halides

The new complex [Pd[t-Bu2PCH2N(CH2Ph)CH2P t-Bu2](OAc)2] is a very efficient catalyst for the Sonogashira cross-coupling reaction of aryl halides with acetylenes at room temperature, without co-catalyst.     

FeCp]+-induced hexafunctionalization of hexamethylbenzene with dendrons for the direct synthesis of redox-active iron-centered metallodendrimers

Phenol tri- and nonaallyl dendrons (3 and 7, respectively) were functionalized at the focal position to give the new triallyl dendrons 4 and 6 and the nonaallyl dendrons 11 and 13 that contain a iodoalkyl or a bromobenzyl termini. All these dendrons were used for the [FeCp]+-induced hexafunctionalization of hexamethylbenzene in [FeCp(eta6-C6Me6)][PF6] (1) under mild conditions in the presence of KOH. These reactions directly yielded the 18-allyl and 54-allyl dendrimers 9, 10, and 14 with a [FeCp(eta6-arene)]+ unit located at the dendrimer core. Cyclic voltammetry studies were recorded in THF and DMF with these metallodendrimers and compared with those of analogous dendrimers or complexes of smaller size that contain a [FeCp(eta6-arene)]+ unit at the core. The decreased rate of heterogeneous electron transfer when the dendritic size increases first disclosed by Diederich and Gross is confirmed. The variation of the redox potential of the Fe(II/I) redox system with increasing dendritic size is negligible even in a solvent of high dielectric constant such as DMF. This trend is attributed to fact that the involved "redox" orbital is buried on the metal center, well protected by the shell of alkyl chains (electron-reservoir nature), unlike in ferrocene. The chemical irreversibility increases in THF as the dendrimer size increases, due to more facile ligand substitution with THF at the 19-electron level when the chain bulk increases.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Synthesis of methylenedioxy-bearing 1-aryl-3-carboxylisoquinolines using a modified Ritter reaction procedure

This paper describes original approaches aimed at the preparation of electron-rich 1-aryl-3-carboxylisoquinolines. Our first attempt led to an efficient preparation of 1-hydroxyisoquinoline-3-carboxylic acid methyl ester starting from bromophthalide via a rearrangement of 2-acetylamino-2-(3-oxo-1,3-dihydroisobenzofuran-1-yl)-malonic acid dimethyl ester. However, as its eventual application to the synthesis of methylenedioxy-bearing substrates seemed rather long, a second approach involving an extension of the Ritter reaction to safrole was devised. We thus report that, under proper experimental settings, the use of 54% tetrafluoroboric acid in ether enables a Ritter reaction between safrole and 3,4,5-trimethoxybenzonitrile yielding 17% of 7-methyl-5-(3,4,5-trimethoxyphenyl)-7,8-dihydro-[1,3]dioxolo[4,5-g]isoquinoline. This acidic reagent avoids the extensive decomposition seen when using the classical Ritter reaction conditions (i.e.: concentrated sulfuric acid). Further chemical transformations of this methyl-bearing dihydroisoquinoline led to the methylenedioxy-bearing 1-aryl-3-carboxylisoquinoline. These derivatives are related to the peripheral benzodiazepine receptor ligand PK 11195 as well as falcipain-2 inhibitors and other potential antitumor agents.     

Toward phenanthridin-2-ylidene: electrophilicity versus acidity in planar-constrained C-aryl iminium salts

A phenanthridinium salt was prepared in four steps, including an intramolecular CH-arylation and a hydride abstraction reaction. Treatment with sterically demanding bases does not lead to the corresponding carbene, but rather to addition products: the planar-constrained geometry significantly enhances the electrophilicity over the acidity of C-aryl iminium salts.     

Solvent-free reaction on KF-alumina under microwave: serendipitous one-pot domino synthesis of new isobenzofuran-1(3H)-ones from alpha-hydroxyketones

The reaction of four α-hydroxyketones 1a-d with a double equivalent of t-butyl acetylacetonate in the presence of KF-alumina under microwave irradiation afforded 6-acetyl-5-hydroxy-3,3-dialkyl-7-methyl isobenzofuran-1(3H)-ones 3a-d.     

Polyesters by a Radical Pathway: Rationalization of the Cyclic Ketene Acetal Efficiency

Radical ring-opening polymerization (rROP) of cyclic ketene acetals (CKAs) combines the advantages of both ring-opening polymerization and radical polymerization thereby allowing the robust production of polyesters coupled with the mild polymerization conditions of a radical process. rROP was recently rejuvenated by the possibility to copolymerize CKAs with classic vinyl monomers leading to the insertion of cleavable functionality into a vinyl-based copolymer backbone and thus imparting (bio)degradability. Such materials are suitable for a large scope of applications, particularly within the biomedical field. The competition between the ring-opening and ring-retaining propagation routes is a major complication in the development of efficient CKA monomers, ultimately leading to the use of only four monomers that are known to completely ring-open under all experimental conditions. In this article we investigate the radical ring-opening polymerization of model CKA monomers and demonstrate by the combination of DFT calculations and kinetic modeling using PREDICI software that we are now able to predict in silico the ring-opening ability of CKA monomers.